Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Lubrication Engineering》 2009-04
Add to Favorite Get Latest Update

Experimental Study on the Drag Characteristics of Lubricating Oil in Boundary Lubrication

Niu Yongsheng Tian Weihua Chen Huitao(Zhongyuan University of Technology,Zhengzhou Henan 450007,China)  
In the form of steady-state conditions,the drag characteristics of the hydraulic transmission oil were tested,and the effect of load,spindle speed and bearing oil pressure on drag characteristics of the hydraulic transmission oil was discussed.The result shows that spindle speed has the greatest impact on oil film pressure distribution.With the increase of spindle speed,oil film pressure increases first and then decreases.The drag coefficient increases with the increase of spindle speed under the same load,and it decreases slightly with the increase of load under the same spindle speed.
【CateGory Index】: TE626.3
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
Chinese Journal Full-text Database 1 Hits
1 Wang Lili Ge Peiqi Lu Changhou Cheng Jianhui(School of Mechanical Engineering,Shandong University,Jinan 250061,China);Input Pressure Effects on the Static and Dynamic Characteristics of Hydrodynamic Lubrication Radial Sliding Bearing[J];Lubrication Engineering;2005-02
Chinese Journal Full-text Database 10 Hits
1 XU Wen-wen1,ZHOU Jian-yong2,TANG Zun-lie2,JIANG Zhi-wei2(1. School of Electronic Engineering,Chongqing University of Posts and Telecommunications,Chongqing 400065,CHN;2. Chongqing Optoelectronics Research Institute,Chongqing 400060,CHN);Non-uniformity Correction of IRFPA Based on Quadratic Curve Fitting[J];Semiconductor Optoelectronics;2009-05
2 Tang Jiade,Liang Lin(Department of Mathematics Chuxiong Normal University,Chuxiong 675000,China);A Markov Chain Model of Urban Air Pollution Control[J];Environmental Science and Management;2008-01
3 SU Hong, MAO Jun, XUE Lin (School of Civil Engineering and Architecture, Northern Jiaotong University, Beijing 100044,China);Research and Experiment on A Compound Sliding Bearing[J];Journal of Northern Jiaotong University;2003-04
4 Wu Xiaobing Sun Fengchun Li Xiaolei An Yongjiang (Beijing Institute of Technology,Beijing,100081);FAULT DIAGNOSIS OF DIESEL ENGINE PISTON LINER WEARING BASED ON MECHANISM STUDY[J];Acta Armamentarii;2000-S1
5 WANG Yu hao ZHANG You chen (College of Mechanical and Electrical Engineering,Beijing University of Chemical Technology,Beijing 100029, China);Elasticity hydromechanical lubrication for elliptical gear transamination[J];JOURNAL OF BEIJING UNIVERSITY OF CHEMICAL TECHNOLOGY;2001-03
6 Wang Yanjing (School of Electricity and Information Engineering,BUCEA Beijing 100044);Bayes Decision Procedure Bases on MATLAB Progame[J];Journal of Beijing University of Civil Engineering and Architecture;2007-04
7 JIN Xin,ZHANG Zhi-jing(School of Mechanical and Vehicular Engineering,Beijing Institute of Technology, Beijing100081,China);Manufacturing Characteristics Based Numerical Surface Model of Microminiatute Component[J];Journal of Beijing Institute of Technology;2005-03
8 Chen Jiaqing(Department of Mechanical Engineering, Beijing Institute of Petro-chemical Technology, Beijing 102600);Analysis of Computational Methods of Contact Parameters in Journal Bearing[J];Journal of Beijing Institufe of Petrochemical Technology;1998-02
9 Wang Xiang Wang Qiang (Department of Mechanical and Electronics Engineering, Beijing University of Posts and Telecommunications, Beijing 100876);Test and Analysis for Friction on Postal Machine[J];JOURNAL OF BEIJING UNIVERSITY OF POSTS AND TELECOMMUNICATIONS;1998-04
10 YANG Hai-feng, ZHOU Xin-yu, ZHANG Hong-sheng, LI Jie, HAI Jin-tao;Two Methods of Friction Coefficient prediction of sliding bearing materials[J];China Surface Engineering;2002-03
China Proceedings of conference Full-text Database 7 Hits
1 CHEN Hui-fang, WANG Ping (Department of Photo-electronic Engineering, Beijing Institute of Technology, Beijing 100081, China);Thermal analysis of polishing optical plane mirror[A];[C];2005
2 Han Ning Zhang Chunhui Shui Lin (Great Wall Application Research Center, SINOPEC Lubricant Company, Beijing 100085);A Review of Antiwear and Friction-Reducing Mechanisms of Additives[A];[C];2004
3 Liu Xingang,Zeng Ming,Zhang Yeming,Hu Li ( College of Materials Science and Engineering,Xihua University,Chengdu 610039);Study on friction and wear properties of PPS composite[A];[C];2010
4 SHAO Qi~(1,2) CAI Zhen-bing~1 LIN Xiu-zhou~1 ZHU Min-hao~1 1. Tribology Research Institute, Traction Power State Key Laboratory Southwest Jiaotong University, Chengdu 610031 2. Institute of Structural Mechanics, China Academy of Engineering Physics, Mianyang 621900;FRICTION AND WEAR PROPERTIES OF SPRAYED WC COATING AND QPQ COMPSITE SALT BATH TREATED LAYER[A];[C];2008
5 Sheng Hui~(1))Ye Xiaoming~(1))Zhang Kun~(1))Huang Jianping~(2)) 1)(Huazhong University of Science and Technology)2)(Gree Electric Appliances,Inc.of Zhuahi);Study on wear characteristics of shaft-thrust surface in rolling rotor compressor[A];[C];2010
6 MENG Fan-jun ZHU Sheng BA De-ma (National Key Laboratory for Remanufacturing,Academy of Armored Forces Engineering,Beijing 100072,China);Microstructure and properties of MIG welded surfacing layers on 45CrNiMoVA steel[A];[C];2007
7 WANG Shi-qing,ZHANG Qun-fei,LEI Kai-zhuo,LIU Qi-kuai 1.College of Marine,Northwestern Polytechnical University,Xi'an 710072,China 2.CETC Institute 29,Chengdu 610000,China;Dynamic simulation of receiver's circuit under strong interference[A];[C];2010
【Secondary Citations】
Chinese Journal Full-text Database 2 Hits
1 Li Zhong Yuan Xiaoyang Zhu Jun (Xi′an Jiaotong University, Xi′an 710049);Inlet Pressure Effects on the Thermo hydrodynamic Performance of a Tilting Pad Thrust Bearing[J];MECHANICAL SCIENCE AND TECHNOLOGY;1999-04
2 Zhao Sanxing, Dai Xudong, Xu Hua, Zhu jun (Theory of Lubrication and Bearing Institute, Xi'an Jiaotong University);Inlet Pressure Effects on the Static and Dynamic Characteristics of Tilting - pad Journal Bearing[J];Lubrication Engineering;2001-04
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved