Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《JOURNAL OF SHAANXI INSTITUTE OF TECHNOLOGY》 2000-03
Add to Favorite Get Latest Update

Experimental study of wire cutting electric discharging machining of compound material SiC_p/LY12

WANG Jin (Dept. of M.E.E.of Shaanxi Institute of Technology,Hanzhong 723003,China)  
This paper studies the influence of eletrical parameters on the cutting rate and surface roughness of the cutting compound material SiC p/LY12 in wire cutting electric discharging machining and analysed the surface features of cutting with SEM. It is found that the influence of peak currents and pulse wideth on the cutting rate and the surface roughness are bigger and next comes the influence of the cutting voltage,also that pulse spacing has little influence on the surface roughness and that it has no influence on the surface roughness when it goes up to a certain value. So, a desirable result can be obtained in cutting SiC p/LY12 with adopting larger peak currents and shorter pulse wideth.
【Fund】: 陕西省教委科研基金资助项目!(96JK0 6 1)
【CateGory Index】: TG506
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 3 Hits
1 LI Shao-wen(School of Shaanxi Aviation Technical Engineering, Hanzhong 723213,China);Study on Electro Discharge Machining of 50%SiC/Cu Composite[J];Mechanical Management and Development;2012-03
2 ZHANG Heng,LIU Gao-jin,GUO Sheng-xia(Institute of Mechanical and Electrical Engineering,Zhejiang Jinhua College of Vocation and Technology,Jinhua 321017,China);Design and Simulation of EDM Pulse Power Supply Detection and Recognition System[J];Light Industry Machinery;2009-06
3 LI Jian-gang1,XIE Nian-suo2(1.School of Mechanical Engineering,Shaanxi University of Technology, Hanzhong 723003,China; 2.School of Material Science and Engineering,Shaanxi University of Technology, Hanzhong 723003,China);Research on EDM technology experimentation of cemented carbide YG8[J];Journal of Shaanxi University of Technology(Natural Science Edition);2012-06
【Citations】
Chinese Journal Full-text Database 1 Hits
1 WANG Jin (Dept. of M.E.E. of Shaanxi Institute of Technology, Hanzhong 723003,China);The performance research of cutting of the compound material SiC p/ZL201[J];JOURNAL OF SHAANXI INSTITUTE OF TECHNOLOGY;1999-04
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 CAI Lean(Wenzhou University,Wenzhou Zhejiang 325027,China);Study of the Blade Dimensions of Cold Press Dies by WEDM-ing[J];Machine Tool & Hydraulics;2006-02
2 PENG Fu-guan WU Bin-li(Jiujiang Vocational and Technical College,Jiujiang City,Jiangxi Province,332007);Application of Line Cutting in Mould Processing[J];Journal of Jiujiang Vocational and Technical College;2010-04
3 LIU Feng1,LIN Shu-li2(1.Mechanical Engineering,Jilin Teachers Institute of Engineering and Technology,Changchun Jilin 130052,China; 2.Peng Jilin Province Environmental Technology Service Co.,Ltd.Wing Safety,Songyuan Jilin 138000,China);Wire Electrical Parameters of the Processing and Analysis of the Quality[J];Journal of Jilin Teachers Institute of Engineering and Technology;2011-10
4 TANG Xiu-lan(Faculty of Mechanics and Electronics,Sichuan College of Vocational and Information Technology,Guangyuan 628017,China);Fast Wire Cutting and Handling of the Workpiece Quality[J];Mechanical Engineer;2010-08
5 DENG Jian-hua,LIANG Li-ping (Department of Machinery Manufacture,Guangdong Province Technician College,Huizhou,Guangdong 516100,China);Application of multi-cutting technique in high-speed linear cutting machine[J];Die & Mould Industry;2006-11
6 YANG Hao-quan,HUANG Jie-qong,ZHOU Ping(School of Mechanical and Electrical Engineering,Shanghai Second Polytechnie University,Shanghai,201209,P.R.China);Study on The Processing of The Up and Down Abnormities Part on WEDM[J];Journal of Shanghai Second Polytechnic University;2005-03
7 XUE Cheng-zhong1,KE Hong2,LIN Qin-ping2(1.Department of physics and Electromechanical Engineering,Sanming University,sanming 365004,China; 2.Centre of Electromechanical Practice,Fuzhou University,Fuzhou 350002,China);The Skill of The Numerical Control Line Cuts[J];Journal of Sanming University;2006-02
8 WANG Xin(Kunshan Dengyun Vocational College of Science and Technology,Kunshan 215300,China);Common Quality Problems and Solutions of Wire Cutting Parts[J];Mechanical Engineering & Automation;2012-03
9 WANG Yong,GUO Lei(Center of Engineering and Technology Southwest University of Science and Technology,Mianyang621010,China);Research and Practice of Numerical Control Wire Cutting Processing Skill[J];Experiment Science & Technology;2009-01
10 WANG Xin1,2(1.School of Mechanical Engineering,Hubei University of Technology,Wuhan 430068,China;2.Suzhou Xiangcheng Professional School,Suzhou 215131,China);Machining of Complex Mating Parts[J];Mechanical Engineering & Automation;2013-03
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 XU Xu-da,JIANG Feng,JIANG Chun-li,TONG Yong-gang,YANG Zu-yong,WANG Lie-xian (School of Materials Science and Engineering,Central South University,Changsha 410083,China);Investigation on friction mechanism and wear behavior of SiC_p/ZL109[J];Ordnance Material Science and Engineering;2008-05
2 JIAO Jian-cheng,XING Ji-shou,YANG Da-yong (Department of Mechanical Engineering, Beijing Institute of Machinery, Beijing 100085, China);Determination of the optimal machining conditions in electrical discharge machining[J];Journal of Beijing Institute of Machinery;2004-01
3 WANG Jin(School of Mechanical Engineering,Shaanxi Institute of Science and Technology,Hanzhong 723003,China);Study on the Wire Cutting Electric Discharging Machining of Cu-based Composite Materials by Reinforced with Particulate Al_2O_3[J];Journal of Chongqing Institute of Technology;2006-08
4 ;A Review of Applications of Continous SiC Fibers[J];Materials Review;1997-06
5 Li Shibo Xu Yongdong Zhang Litong( State Key Laboratory of Solidification Processing, North western Polytechenical University ,Xi'an 710072) ( Department of Material Science and Engineering,Harbin University of Architecture and Civil Engineering, 150090);Study on Silicon Carbide Fibers Reinforced Ceramic-Matrix Composites[J];Materials Review;2001-01
6 Liu Rongjun Zhou Xingui Zhang Changrui (Key Laboratory of National Defense Technology,College of Aerospace & Materials Engineering,National University of Defense Technology,Changsha 410073);Review of Oxidation Protection Research for Ceramic Matrix Composites Reinforced with Carbon Fibers(CFRCMCs)[J];Materials Review;2001-08
7 Fan Jianzhong;Sang Jimei;Shi Likai, National Engineering & Technology Research Center for Non-Ferrous Metals Composites, Beijing General Research Institute for Non-ferrous Metals, Beijing 100088;Fabrication, Application and Development of Particle Reinforced Aluminium Matrix Composites[J];Materials Review;2001-10
8 CUI Yan (Institute of Aeronautical Materials, Beijing 100095, China);Aerospace Applications of Silicon Carbide Particulate Reinforced Aluminium Matrix Composites[J];Journal of Materials Engineering;2002-06
9 WANG Yang 1, JIANG Da-zhi 2, XIA Yuan-ming 1(1. Dept. of Mechanics & Mechanical Engineering, University of Science & Technology of China, Hefei 230026, China; 2. School of Aerospace and Materials Engineering, National University of Defense Technology,;Tensile test of unidirectional C_f/SiC composites[J];Material Science and Technology;2001-01
10 Hu Baogang; Zhao Jianshe; Li Demao(Beijing Institute of Materials and Technology);Cutting Processing Technology of Carbon Fibre Composite Material[J];MISSILES AND SPACE VEHICLES;1994-05
【Secondary References】
Chinese Journal Full-text Database 4 Hits
1 ZHU Jian-hui,HE Le-nian,LIN Ling(Institute of VLSI Design,Zhejiang University,Hangzhou 310027,China);High-voltage LED driver based on SOI process[J];Journal of Mechanical & Electrical Engineering;2011-08
2 LI Jian-gang(School of Mechanical Engineering,Shaanxi Institute of Science and Technology, Hanzhong 723003,China);Common Fault Analysis and Clearance on WEDM-HS’ Machine[J];Mechanical Management and Development;2012-03
3 CHEN Ling-lin;SUN Hui-lai;School of Mechanical Engineering,Tianjin Polytechnic University;;The status of the composite materials processing research and application of laser in its processing[J];Laser Journal;2014-02
4 JIN Yanjuan;CUI Xiaochao;ZHANG Zhu;School of Applied Science, Taiyuan University of Science and Technology;;Numerical Simulation of Cast-rolling Process for Strip of Fiber Reinforced Aluminum Matrix Composites[J];Foundry Technology;2014-03
【Secondary Citations】
Chinese Journal Full-text Database 1 Hits
1 Quan Yanming(South China University of Technology,Guangzhou,510641);Development in the Machining of Metal Matrix Composites[J];MACHINE DESIGN AND MANUFACTURING ENGINEERING;1999-02
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved