Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Journal of Shaanxi University of Technology(Natural Science Edition)》 2012-06
Add to Favorite Get Latest Update

Research on EDM technology experimentation of cemented carbide YG8

LI Jian-gang1,XIE Nian-suo2(1.School of Mechanical Engineering,Shaanxi University of Technology, Hanzhong 723003,China; 2.School of Material Science and Engineering,Shaanxi University of Technology, Hanzhong 723003,China)  
In cutting process of EDM,the main electrical parameters of influence on cutting speed and surface roughness are the pulse voltage,pulse width,pulse interval or pulse frequency and pulse width ratio.The influence of such electrical parameters as the pulse voltage and pulse width on cutting speed and surface roughness is mainly discussed in this paper.Based on an analysis of the surface roughness and cutting speed resulted from selections of different electric parameters on carbide alloy,the paper arrives at a general law and optimal parameters for electrical processing,which hopes to provide reliable reference for further processing.
【Fund】: 陕西省教育厅科研基金资助项目(11JK0878 12JK0677)
【CateGory Index】: TG484
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【Citations】
Chinese Journal Full-text Database 5 Hits
1 JIAO Jian-cheng,XING Ji-shou,YANG Da-yong (Department of Mechanical Engineering, Beijing Institute of Machinery, Beijing 100085, China);Determination of the optimal machining conditions in electrical discharge machining[J];Journal of Beijing Institute of Machinery;2004-01
2 WANG Jin(School of Mechanical Engineering,Shaanxi Institute of Science and Technology,Hanzhong 723003,China);Study on the Wire Cutting Electric Discharging Machining of Cu-based Composite Materials by Reinforced with Particulate Al_2O_3[J];Journal of Chongqing Institute of Technology;2006-08
3 Zheng Fuqiang1,Zou Dan2,Zang Haitian3 (1.Hunan Boyun-dongfang Powder Metallurgy Co.,Ltd,Changsha 410012,China; 2.Nanjing Jinning Frock Co.,Ltd,Nanjing 210025,China);The Influence of Denatured Layer on the Properties of Cemented Carbides[J];Electromachining & Mould;2009-05
4 ZHANG Gao-ping,GUO Guang-yi,ZHAO Ling(Nantong Vocational College,Nantong,Jiangsu 226007,China);Experimental research on EDM process of cemented carbide YG8A[J];Die & Mould Industry;2011-04
5 WANG Jin (Dept. of M.E.E.of Shaanxi Institute of Technology,Hanzhong 723003,China);Experimental study of wire cutting electric discharging machining of compound material SiC_p/LY12[J];JOURNAL OF SHAANXI INSTITUTE OF TECHNOLOGY;2000-03
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 Zhang Shucai, Zhao Fuling, Wang Xiaoming(Dalian University of Technology, Dalian 116023, China);Study on LSWEDM with Ultrasonic Vibration of the Wire[J];Electromachining & Mould;2005-02
2 Dong Xiaolei,Master Degree Candidate,School of Mechanical and Power Engineering,Henan Polytechnic University,Jiaozuo 454000 Gao Guofu Ma Xinghui;Study for Machining Surface Quality of Particle Reinforced Metal Matrix Composites[J];Tool Engineering;2008-12
3 SONG Man-cang1,2,ZHANG Jian-lei1,2,YU Chao1,2,WANG Min-jie1,2,LIU Chong3(1.Engineering Research Center for Molding Product of the Ministry of Education, Dalian University of Technology,Dalian 116023,China; 2.MITSUBISH-DUT Electrical Discharge Machining Technology Center,Dalian 116023,China; 3.Key Laboratory for Micro/Nano Technology and System of Liaoning Province, Dalian University of Technology,Dalian 116023,China);Experiment of WEDM precision machining for polycrystalline diamond compact[J];Optics and Precision Engineering;2012-06
4 PENG Wenli1,2,DIAO Renfei1,DANG Xinan1(1.College of Mechanical and Electronical Engineering,Shaanxi Universityof Science & Technology,Xianyang Shaanxi 710021,China;2.College of Mechanical and Electronical Engineering,Jiaxing University,Jiaxing Zhejiang 314001,China);The Discussion of Carbon Deposition in EDM Process[J];Machine Tool & Hydraulics;2009-08
5 SONG Man-cang1,2,ZHANG Jian-lei1,2,WANG Hua3,YU Chao1,2,WANG Min-jie1,2,LIU Chong4(1.Engineering Research Center for Molding Product of Ministry of Education,Dalian University of Technology,Dalian 116023,China)(2.MITSUBISH-DUT Electrical Discharge Machining Technology Center,Dalian 116023,China)(3.Mitsubishi Electric Automation(China) Ltd.,Shanghai 200336,China) (4.Key Laboratory for Micro/Nano Technology and System of Liaoning Province,Dalian University of Technology,Dalian 116023,China);Processing quality of PCD and PCBN compacts by wire electric discharge machining[J];Diamond & Abrasives Engineering;2012-03
6 LI Shao-wen(School of Shaanxi Aviation Technical Engineering, Hanzhong 723213,China);Study on Electro Discharge Machining of 50%SiC/Cu Composite[J];Mechanical Management and Development;2012-03
7 LI Jian-gang(School of Mechanical Engineering,Shaanxi Institute of Science and Technology, Hanzhong 723003,China);Common Fault Analysis and Clearance on WEDM-HS’ Machine[J];Mechanical Management and Development;2012-03
8 ZHANG Heng,LIU Gao-jin,GUO Sheng-xia(Institute of Mechanical and Electrical Engineering,Zhejiang Jinhua College of Vocation and Technology,Jinhua 321017,China);Design and Simulation of EDM Pulse Power Supply Detection and Recognition System[J];Light Industry Machinery;2009-06
9 HE Hei-hu1,2,LU Zhi2,LIN Feng2,FENG Ji-fu2(1.Guilin University of Technology,Guilin,Guangxi 541004,China;2.China National Mineral Materials Engineering Research Center,Guilin,Guangxi 541004,China);Factors of influencing on the process property of PcBN[J];Superhard Material Engineering;2007-02
10 Zhang Gaofeng1,2 Deng Zhaohui11.Hunan University,Changsha,4100822.Xiangtan University,Xiangtan,Hunan,411105;Cutting Mechanism and Surface Appearance of PDC with WEDM[J];China Mechanical Engineering;2007-06
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 LI Qing, ZHENG Deling, TANG Yong, CHEN Zhanying (Information Engineering School, UST Beijing, Beijing 100083, China; Automation Research Institute of the Ministry of Metallurgical Industry Beijing 100071, China);A New Kind of Fuzzy Genetic Algorithm[J];Journal of University of Science and Technology Beijing;2001-01
2 Yang Dayong, et al.;Study on CNC system for EDM[J];Electromachining & Mould;2003-01
3 Zhou Jilie, et al.;Cracking behaviours of sintered carbides during EDM[J];Electromachining & Mould;2003-06
4 Huang Zhenyuan,Guo Lei,Zhou Chi,Ruan Feng (South China University of Technology,Guangzhou 510640,China);Fracture Failure Investigation of WC-Co Cemented Carbides Precision Progressive Die[J];Electromachining & Mould;2007-03
5 Yu Sirong He Zhenming Chen Kai (Jilin University of Technology, Changchun 130025);CUTTING SURFACE QUALITY OF ZA22/Al 2O 3 COMPOSITES[J];ACTA MATERIAE COMPOSITAE SINICA;1996-03
6 Hu Yujing Zhang Jianhua Ren Shengfeng et al;Study on EDM Performance of Carbide Under Different Electricity Parameter[J];Tool Engineering;2006-01
7 SUN Bai qing 1, PAN Qi shu 1, FENG Ying jun 1, ZHANG Chang sheng 2 (1.School of Management, Harbin Institute of Technology, Harbin 150001, China; 2.Dept of Mathematics, Harbin Institute of Technology, Harbin 150001,China);Improvement of BP network training rate[J];Journal of Harbin Institute of Technology;2001-04
8 ;Neural Network_Based Information Fusion in Machining[J];;1999-02
9 GAO Da-Qi(Institute of Information Science, Jiangsu University of Science and Technology, Zhenjiang 212013);ON STRUCTURES OF SUPERVISED LINEAR BASIS FUNCTION FEEDFORWARD THREE-LAYERED NEURAL NETWORKS[J];CHINESE JOURNAL OF COMPUTERS;1998-01
10 ZHANG Zhen-dong1,AI Fu-chao1,JIANG Jun2(1.Department of Automation,Hebei University of Technology,Tianjin 300130,China;2.Department of Precision Instruments and Mechanology,Tsinghua University,Beijing 100084,China);Effect of discharge energy on machined surface quality[J];Die & Mould Industry;2008-03
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved