Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Experimental Technology and Management》 2012-03
Add to Favorite Get Latest Update

Testing and analysis on vibration responses of cutting tool in turning process

Meng Hua1,Li Shuncai1,Liu Yuqing2(1.School of Mechanical and Electrical Engineering,Xuzhou Normal University,Xuzhou 221116,China; 2.School of Mechanics and Civil Engineering,China University of Mining and Technology,Xuzhou 221008,China)  
By means of the QLVC-ZSA1 analysis instrument of vibration signals and acceleration sensor,the vibration responses of the cutting tool are tested and quantitatively studied for the turning process of the numerically controlled lathe under the different cutting elements,and the time series curves and the self-power spectral density curves of the acceleration vibration signals of the cutting tool are obtained.The study indicates that(1) the vibration response of the cutting tool is a time-varying process with the operating of the turning.For the turning period with same turning parameters in a tool moving path,the hammer vibration energy of the cutting tool decreases with the increase of the material removal;(2) with the increase in cutting depth,the maximum of the self-power spectral density of the tool vibration doesn't increase monotonically and the cutting depth has a critical value for the effect on the tool vibration;(3) with the increase in the spindle speed and feeding velocity,the self-power spectral density of the tool vibration also increases,while the corresponding vibration frequency decreases.
【Fund】: 国家自然科学基金(50974107) 江苏省“青蓝工程”(10QLD006);; 徐州师范大学研究生科研创新计划项目(2011YLA008);; 实验室建设与管理研究课题(L2011Y11)
【CateGory Index】: TG519.1
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【Citations】
Chinese Journal Full-text Database 6 Hits
1 Lin Junhuan1,Zou Xiang2,Li Guoping2(1.Department of Electromechanies,Taizhou Vocational Technical College,Taizhou 318000,China;2.Faculty of Mechanical Engineering and Mechanics,Ningbo University,Ningbo 315211,China);Research on a Turning Vibration Control System Based on Piezoelectric Ceramic Actuator[J];Computer Measurement & Control;2011-05
2 NIE Rong-zheng (Changzhou Liuguojun Higher Vocational and Technical school,Changzhou Jiangsu 213004,China);Control of the Vibration Induced by Turning Process of Lathes[J];Forestry Machinery & Woodworking Equipment;2010-01
3 LIU Cheng-wen, QIAO Bin (Huaihai Institute of Technology,Lianyungang 222005,China);Application of virtual instrument in the experiment measuring natural frequency of cantilever beam[J];Coal Mine Machinery;2004-11
4 ZHANG Jian-guo,ZONG Wen-jun,SUN Tao(Centre for Precision Engineering,Harbin Institute of Technology,Harbin 150001,China);Tool Vibration Spectrum Analysis in Ultra Precision Diamond Turning of Single Crystal Silicon[J];Nanotechnology and Precision Engineering;2010-06
5 Zhang Dawei; He Jiaxiang; Xu Yanshen; Huang Tian (Dept. of Mechanical Engineering);THE STUDY ON THE RELATIONSHIP BETWEEN VIBRATION FREQUENCY AND CUTTING ROTATION SPEED IN DYNAMIC CUTTING PROCESS[J];JOURNAL OF TIANJIN UNIVERSITY;1994-04
6 Jiang,Wei Yuan,Fang(academy of electronic and mechanic engineer,East china institute of technology);The Design of the vibration measurement system based on virtual instrument technology[J];;2006-28
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 PAN Xue-tao SHEN Yang WU Hua-zhi ZHOU Xiang-cai ZHANG Yan(School of Photoelectric Engineering,Changzhou Institute of Technology,Changzhou 213002);Application of LabVIEW to Characteristic Parameter Measurement of Vibration System[J];Journal of Changzhou Institute of Technology;2008-02
2 GUO Ji-tan,ZHONG Bei(School of Civil and Safety Engineering,Dalian Jiaotong University,Dalian 116028,China);Measurment and Verification of Sidewall Pressure in 5.5m Stamping Charging Coal Machine Vessel[J];Journal of Dalian Jiaotong University;2010-05
3 Dai Xin (School of Mechanical and Electrical Engineering,Guangzhou University,Guangdong Guangzhou,510060);The Application of Virtual Instrument in Vibration Test System[J];Electronics Quality;2008-05
4 Lin Yu,Liu Jian-qun,Li Duan-neng,Wu Ji-rong,Xu Dong(Faculty of Electromechanics Engineering,Guangdong University of Technology,Guangzhou 510006,China);The Design of the Laboratory Equipment for Motor-driven Linear Parameters Test[J];Journal of Guangdong University of Technology;2010-01
5 Kong Jinxing;Precision Machining for Low Rigidity Thin-Wall Parts[J];Tool Engineering;2003-12
6 LIU Xue-mei,ZHANG Hai-liang(East China Jiao-Tong University,Nanchang,330013,China);Methane Fermentation Devices Based on Single Chip Temperature Control System[J];Chinese Agricultural Mechanization;2012-01
7 CHEN Jian,ZHENG Shi-ming,LIU Jia(Space Star Technology Co.Ltd.,Beijing 100086,China);Design and realization of the ground test system for synthesis navigation equipment[J];Electronic Design Engineering;2011-10
8 BI Qi- lin,YIN Hui- jun (Department of Mechanical Engineering,Guangxi University of Technology,Liuzhou Guangxi 545006,China);The New Way of Detecting Large Hydraulic Mechanical’s Fact Press is True or not[J];Equipment Manufacturing Technology;2009-12
9 LI Bing(Department of Mechanical Engineering,Guangxi University of Technology,Liuzhou Guangxi 545005,China);Application on Engineering-case Teaching Method in 《Engineering Testing Technology》[J];Equipment Manufacturing Technology;2010-08
10 YANG Bin(Zhaoqing Science and Technology Polytechnic,Zhaoqing Guangdong 526114,China);The Solution about Cause of Numerical Control Lathe Emerge Vibration[J];Equipment Manufacturing Technology;2011-03
China Proceedings of conference Full-text Database 1 Hits
1 HU Miao-xuan,ZENG Yue-nan,TANG Xiong-min (Institute of Automation,Guangdong University of Technology,Guangzhou,510006,China);Research on a New Detecting Method for Rigid Nature Frequency[A];[C];2009
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 Lu Yong, Hu Baohang, Wang Qiyi, Hu Baozhen Wang Render;Research for Machine Tool Spindle System with Added Oil Film Bearing[J];;1986-02
2 Han Rongde et al;Desigh of Self-propelled Rotary Tools and Their Cutting Performances[J];TOOL ENGINEERING;1997-09
3 Ming Donglan et al;Factors Influencing the Properties of Metal Fibre Machined by Using Self propelled turning Tools[J];TOOL ENGINEERING;1998-04
4 Bao Zhijun et al;Research on Tool Life and Application of Self Propelled Cutting Tools[J];TOOL ENGINEERING;1998-10
5 LU Hua, FU Hong ya, HAN De dong, FU Yun zhong, WANG Yong zhang (Dept. of Mechanical Engineering, Harbin Institute of Technology, Harbin 150001, China, E mail: hongyafu@hope.hit.edu.cn);Stability analysis for cutting of sculptured surface with ball end mill[J];Journal of Harbin Institute of Technology;2003-06
6 Qu Chunjing Han Rongde Wang Yang (Dept. of Mechanical Engineering,HIT);Study on Structural Parameters of Self propelled Rotary Cutting Tools[J];JOURNAL OF HARBIN INSTITUTE OF TECHNOLOGY;1999-01
7 LIU Cheng-wen, XIAO Xing-ming, LIU Chu-sheng (College of Mechatronic and Material Engineering, China University of Mining and Technology, Xuzhou 221008, China);Virtual Experiments and Talent Cultivation[J];Journal of Huaihai Inscitute of Technology;2003-02
8 Mei Zhijian Liu Jingyan Shi Hanmin Yang Shuzi Han Jingli Zhou Guangqian;Computer-Aided Pattern Recognition and On-Line Monitored Control for Chattering during Metal Cutting[J];;1987-02
9 Shi Hanmin Xie Yueyun Lu Tianguang;Microcomputer-Based Digital Simulation of Machine Tool Chattering[J];;1987-02
10 WANG Li-gang,LIU Xi-jun,JIA Qi-fen(Department of Mechanics,Tianjin University,300072 Tianjin,China);Studies and Developments about Cutting Chatter of Machine Tools[J];Machine Tool & Hydraulics;2004-11
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved