Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Natural Gas Industry》 2013-01
Add to Favorite Get Latest Update

Development and application of a new single-adaptor tubing-conveyed perforation gun

Fu Liangjia1,Zhang Xiaohua2,Geng Anran1,Zhao Li2(1.Sinopec Zhongyuan Oilfield Company,Puyang,Henan 457001,China;2.Sinopec Zhongyuan Petroleum Prospecting Bureau,Puyang,Henan 457001,China)  
The Puguang Gas Field is characterized by high pressure,high temperature and high content of H2S,and gas wells there commonly have great depth,high deviation angle and long perforation section.Traditional perforation guns can not meet the requirements of field operation,thus it is urgent to develop a new perforation gun.Based on absorbing the merits of traditional perforation guns and through strict selection of material,specification of gun body,design of bullet hanger structure and detonation sub,and optimization of detonation cord,a new single adapter tubing-conveyed perforation gun is successfully developed of bullet hanger tightened type.It is manufactured with TP110S steel and has an outer diameter of 114 mm,wall thickness of 11 mm,pressure resistance over 120 MPa,and temperature resistance over 140 ℃.Compared with traditional perforation guns,the new gun with strong stability also has a high resistance to H2S,temperature,pressure,tension and compression.And its stability gets strenghthened by the fastening structure of the gun carrier,which is almost at the same coaxial line with the gun body.It has been successfully applied in several gas wells in the Puguang Gas Field and the successful rate of perforation operation is 100%.The good consistency between the predicted and actual gas rates reveals that the design of the new perforation gun is rational and its performance is reliable.
【CateGory Index】: TE257.1
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【Citations】
Chinese Journal Full-text Database 9 Hits
1 HUANG Jia,ZHANG Zhao,ZHENG Yonggang,ZHANG Hongwu (State Key Laboratory of Structural Analysis for Industrial Equipment,Faculty of Vehicle Engineering and Mechanics, Dalian University of Technology,Dalian,Liaoning 116024,China);On Perforating Gun Design and Perforating Process Based on SPH Method[J];Well Logging Technology;2011-05
2 LIU Zu-fan1,2,ZU Jing1,2,CUI Chun-sheng1,2,MA Tie-hua1,2(1.Science and Technology on Electronic Test & Measurement Laboratory,North University of China,Taiyuan 030051,China; 2.Key Laboratory of Instrumentation Science & Dynamic Measurement,Ministry of Education,North University of China,Taiyuan 030051,China);Research on pressure measurement system in perforation gun[J];Journal of Engineering Design;2011-05
3 GUO Xi-ming1,JIANG Hong-wei2,HUANG Yu-kang3,GUO Qing-feng2,JIANG Ji-wei4(1.Production and Well Test Company,PetroChina Daqing Oilfield Limited Company,Daqing 163412,China;2.CNPC Drilling Research Institute,Beijing 100195,China;3.China Petroleum Technology & Development Corporation,Beijing 100028,China;4.College of Petroleum Engineering,China University of Petroleum(Beijing) 102249,China);Study of New-type Composite Perforating Gun in Horizontal Well[J];Oil Field Equipment;2011-05
4 JIN Wei-wei1 ZHANG Zhao2 ZHANG Hong-wu4(State Key Laboratory of Structural Analysis for Industrial Equipment,Department of Engineering Mechanics,Dalian University of Technology,Dalian 116024 China)HAN Xiu-qing3(School of Basic Science,Changchun University of Technology,Changchun 130012 China);Numerical simulation of formation of shaped charge jet and cartridge design for perforating gun[J];Journal of Plasticity Engineering;2010-06
5 Yu Qingjun (School of Aeronautics, Nothwestern Polytechnical University, Xi'an), Tao Liang, Li Yulong, et al.;Experimental study of dynamic constitutive equation for body material of composite perforation gun[J];China Petroleum Machinery;2006-10
6 Hou Weidong,Ge Lei,Liu Wei,Dang Youwei,Wang hua Wei and Cui ShuPing.;Study and application of the secure energization joint for oil-gas well perforation[J];Petroleum Instruments;2011-04
7 ZHANG Qing-sheng1,2,WU Xiao-dong1,WEI Feng-ling2,SHI Xiao-zhen2,SONG Jian-hu3(1.Petroleum and Natural Gas Engineering Institute,China University of Petroleum,Beijing 102249,China; 2.Gas Producing Engineering Technology Institute,Sinopec Zhongyuan Oilfield Company,Puyang 457001,China; 3.No.2 Gas Producing Factory of Sinopec Zhongyuan Oilfield Company,Puyang 457001,China);The optimum selection on gas producing pipe string in Puguang gas field with high sulfur content[J];Natural Gas Industry;2009-06
8 LUO Rui-zheng,HAN Jian-hong,LI Guo-ping,ZHOU Pei-li,YIN Feng(Puguang Branch,Sinopec Zhongyuan Oilfield Company,Dazhou 631561,China);Safety measures and management on gas testing in high sour gas fields:A case study of Puguang gas field[J];Natural Gas Industry;2009-07
9 Kong Fanqun1,Wang Shouping1,Zeng Daqian2(1.Zhongyuan Oilfield Company,Sinopec,Puyang,Henan 457001,China;2.Puguang Branch of Zhongyuan Oilfield Company,Sinopec,Dazhou,Sichuan 635000,China);Key techniques for the development of the Puguang Gas Field with a high content of H_2S[J];Natural Gas Industry;2011-03
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 ZHANG Xiao-po, WANG Guang-yan, GUO Zhi-ying (Dept. of Equipment Command & Management Engineering Ordnance Engineering College, Shijiazhuang, 050003, China);Finite Element Modeling of Fragment Penetrating Target Based on ANSYS/LS-DYNA[J];Ordnance Industry Automation;2007-12
2 Shen Chen (Exploration and Production Dept.SINOPEC,Beijing 100728,China);The exploration and development engineering technology for ultra deep and high acid gas field in Northeast Sichuan[J];Engineering Sciences;2010-10
3 YANG Li-yong et al(Resources and Environment College of Yuxi Normal University,Yuxi 653100,China);Study on the Way of Land Use in Security Control Area of High Sour Gas Field's Exploitation[J];Territory & Natural Resources Study;2011-06
4 CHEN Chang-xin1,2,JIN Hong1,2,MA Tie-hua1,2,ZU Jing1,2(1.National Key Laboratory for Electronic Measurement Technology,North University of China,Taiyuan 030051,China; 2.Key Laboratory of Instrumentation Science & Dynamic Measurement of Ministry of Education, North University of China,Taiyuan 030051,China);Research on miniaturization of dynamic parameter recorder based on SoC[J];Chinese Journal of Engineering Design;2012-06
5 HU Ming-xiang1,2,ZU Jing1,2,CUI Chun-sheng1,2,MA Tie-hua1,2,(1.National Key Laboratory for Electronic Measurement Technology,North University of China,Taiyuan 030051,China; 2.Key Laboratory of Instrumentation Science & Dynamic Measurement of Ministry of Education, North University of China,Taiyuan 030051,China);Design and simulation research on tester of perforator cavity pressure[J];Chinese Journal of Engineering Design;2012-06
6 JIN Wei-wei,ZHANG Zhao*,ZHANG Hong-wu (State Key Laboratory of Structural Analysis for Industrial Equipment,Department of Engineering Mechanics, Faculty of Vehicle Engineering and Mechanics,Dalian University of Technology,Dalian 116024,China);Effect of liner cone angle on perforation and impact process of perforating guns[J];Chinese Journal of Computational Mechanics;2011-S1
7 ZHU Gong-zhi1,ZHANG Jian-wei2,ZHU Ming-jie2(Transportation Equipments and Ocean Engineering College,Dalian Maritime University1, Dalian 116026,P.R.China;Dalian University2,Dalian 116622,P.R.China);Structural Optimization Design of the Body of Oil Perforating Gun[J];Science Technology and Engineering;2011-25
8 ZOU Bing1,2,ZHU Liang1,2,GAO Shao-hua1,2,ZHANG He1,2(1.Qingdao Safety Engineering Institute,SINOPEC,Qingdao 266071,China)(2.State Key Laboratory for Safety Control of Chemicals,Qingdao 266071,China);Safe management of H_2S leakage during the process of feed and trial in gas purification plant[J];Journal of Safety Science and Technology;2012-02
9 ;高含硫气田集输系统调试及试车技术[J];Inner Mongolia Petrochemical Industry;2012-09
10 WEI Kun-peng,GU Xiao-hong,ZOU Feng-mei,YAO Hui-zhi,YIN Chao-wei (Petroleum Engineering Institute of Zhongyuan Oilfield Branch,SINOPEC,Puyang 457001,P.R.China);Casing Deformation Well Completion Technology in Puguang Gas Field[J];Inner Mongolia Petrochemical Industry;2012-11
China Proceedings of conference Full-text Database 1 Hits
1 JIN Wei-wei,ZHANG Zhao,ZHANG Hong-wu State Key Laboratory of Structural Analysis for Industrial Equipment,Department of Engineering Mechanics,Faculty of Vehicle Engineering and Mechanics,Dalian University of Technology,Dalian 116024,China;Effect of Liner Cone Angle on Perforation and Impact Process of Perforating Guns[A];[C];2010
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 WANG Li-li(Mechanics and Materials Science Research Center, Ningbo University, Ning bo315211, Zhejiang, China);On constitutive modeling in numerical simulation of explosion mechanics[J];Explosion and Shock Waves;2003-02
2 CHEN Gang,CHEN Zhong-fu,XU Wei-fang,CHEN Yong-mei,HUANG Xi-cheng(Institute of Structural Mechanics,China Academy of Engineering Physics,Mianyang 621900,Sichuan,China);Investigation on the J-C ductile fracture parameters of 45 steel[J];Explosion and Shock Waves;2007-02
3 CUI Hai 1,MENG Zhuo 2,LIU Ai-dong 2,TAN Song-hua 2 [WT5”HZ][ST5”HZ](1. Haijian Mach. Works,Harbin Engineering University,Harbin 150001,China; 2. College of Mach.-Elec.,Harbin Engineering University,Harbin 150001,China) [HT5”SS][WT5”HZ];Development of detective instrument for sensing oil-well data[J];JOURNAL OF TRANSDUCER TECHNOLOGY;2000-01
4 TAN Ding zhong 1, ZHANG Ming jun 2, JIANG Zheng wu 2, WANG Dian jun 2 (1.Coll of Mech and Elct Engin,Harbin Institute of Technology,Harbin 150001,China; 2.Coll of Mech and Elct Engin,Harbin Engineering University,Harbin 150001,China);Synthesized testing system of oil-well hole-shooting technical parameters[J];Journal of Transducer Technology;2002-03
5 LIAO Dong-liang~(1,2),SUN Jian-meng~1,CHAI Chun-yan~2,LUO Hui-qiong~2,WANG Chun-lian~2,XIONG Mei-hong~3 (1.China Universsity of Petroleum,Dongying, Shandong 257000,China; 2.Well Logging Company, Shengli Oilfield, Dongying, Shandong 257200, China; 3.Geology Institute of Hekou Oil Plant, Shengli Oilfield, Dongying, Shandong 257061, China);On Numerical Simulation of Horizontal Well Perforating Parameters[J];Well Logging Technology;2005-03
6 LIANG Chun,SUN Xin-bo,WANG Hai-dong(Petroleum Industry Perforators Inspection Center,Daqing,Heilongjiang 163853,China);Test and Analysis on the Exploding Speed of Prima Cord[J];Well Logging Technology;2006-01
7 TAO Liang,AI Xiao-li(Xi'an Tong Yuan Petro-tech.CO.LTD.,Xi'an, Shaanxi 710075,China);The Accuracy Verification on Numerical Simulation of Perforation and Its Applying Prospect[J];Well Logging Technology;2007-01
8 ZHANG Zhao,HU Hai-fei,KANG Zhan (State Key Laboratory of Structural Analysis for Industrial Equipment,Faculty of Vehicle Engineering and Mechanics,Dalian University of Technology,Dalian,Liaoning 116024,China);Taguchi Method Based on Multi-objective Optimization of Perforating Gun[J];Well Logging Technology;2009-02
9 WANG Jing,WANG Cheng,NING Jian-guo(State Key Laboratory of Explosion Science and Technology,Beijing Institute of Technology,Beijing 100081,China);THEORETICAL MODEL FOR SHAPED CHARGE JETS PENETRATION AND CAVITY RADIUS CALCULATION[J];Engineering Mechanics;2009-04
10 HAN Xiuqing1,LI Lingfei1,ZHAO Kongxin2,ZHU Gongzhi1(1.School of Basic Science, Changchun University of Technology, Changchun 130012, China;2.School of Computer Science, Changchun University of Technology, Changchun 130012, China);The Structural Optimal Design Method for Oil Perforating Guns with Finite Element Method[J];;2002-S1
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved