Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Special Casting & Nonferrous Alloys》 2003-01
Add to Favorite Get Latest Update

Principle of Squeezing Casting and Analysis of Casting Defects

Tang Duoguang Zhang Jinlong (Shanghai University, Shanghai, China) Xu Zhangyi Shen Youliang Chen Qianguo(Kun-shuan EK-chor Automobile Part Works, Kunshan, China)  
Mold filling smoothly with low speed and large flow rate as well as instant pressurization in time conformed to the basic principles of squeezing casting.The lower specific pressure and delay pressurization in time during casting process were responsible for surface blister and cold shut of motor cycle wheel in squeezing casting. An available chamber design is presented to prevent squeezing casting from creation of shrinkage crack and shrinkage hole as well as to elevate specific pressure.
【CateGory Index】: TG249.2
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 10 Hits
1 HU Hong-jun,DAI Bing,YANG Ming-bo,ZENG Ying(Department of Material Science and Engineering,Chongqing Institute of Technology,Chongqing 400050,China);Analysis and solution to die castings porosity of JY110 motorcycle boxes[J];Ordnance Material Science and Engineering;2006-05
2 LI Hai_kai, ZHANG Li_zhong, HU Yuan_meng, CHEN Yu XIAO Li_ming, HAN Shu_xia (School of Mechanical and Electronic Control Engineering, Beijing Jiaotong University, Beijing 100044,China);Study on Forming of Axle Box Body of B Grade Steel by Semi-Solid Squeeze Casting[J];Journal of Northern Jiaotong University;2005-01
3 LUO Jing (Department of Material science and engineering,Chonqing Institute of Technology, Chongqing 400050,China);Failure Analysis and Prevention on Die casting of Motorcycle Boxes[J];Hot Working Technology;2006-05
4 ZHANG Hui(School of Material,Shaanxi University of Technology,Hanzhong 723003 China);Study on liquid forging technology of Al-Si-Cu alloy[J];Journal of Plasticity Engineering;2011-05
5 Zhao Hongjin 1,2 Kang Yonglin 1 Wang Zhaohui 1 Liu Jinwei 1 Du Hailiang 1 (1.University of Science and Technology Beijing,Beijing,China;2.Jiangxi University of Science and Technology,Nanchang,China);Magnesium Alloy Beam-barrel Parts in Direct Squeezing Casting[J];Special Casting & Nonferrous Alloys;2005-10
6 Lu Zhuo, Li Yuanyuan, Zhao Haidong, Luo Zongqiang, Zhang Weiwen (South China University of Technology, Guangzhou, China);Al Alloy Support Frame in Indirect Squeezing Casting[J];Special Casting & Nonferrous Alloys;2006-08
7 Luo Jixiang, Li Minhua (Wuhan University of Technology, Wuhan, China);Synthetically Control of the Quality on Squeezed Castings[J];Special Casting & Nonferrous Alloys;2006-11
8 Liu Pingting~1,Luo Jixiang~1, Hu Jianmin~2 (1. College of Logistic Engineering, Wuhan University of Technology, Wuhan, China; 2. Nantong Nonferrous Alloy Foundry Plant, Nantong, China);Production of High Pressure Gear Pump by Squeezing Casting[J];Special Casting & Nonferrous Alloys;2007-02
9 Luo Jixing1 Huang Guoqing1 Chen Yun1 Jiang Yuhang2 Feng Fugui3(1.Wuhan Uuiversity of Technology; 2.Zhejiang wanfeng TechololgyDevelopment Co.,Ltd.; 3.WenLing Yihua Meter plant);The Application of Casting Simulation Software JSCAST in Squeezing Casting[J];Special Casting & Nonferrous Alloys;2007-S1
10 Luo Guojian1,Luo Jixiang1,Jiang Yuhua2,Chen Yun1,Feng Fugui3(1.School of Logistics,Wuhan University of Technology,Wuhan,China;2.Wanfeng Aowei S& T Development Co.,Ltd.,Shaoxing,China;3.Wenling Yihua Meter and Instrument Plant,Wenling,China);Application of JSCAST Software to Squeezing Casting[J];Special Casting & Nonferrous Alloys;2008-01
China Proceedings of conference Full-text Database 1 Hits
1 DUAN Li-ping,HOU Lin-chong,YIN Tao,XU Hong-fei (Ningbo Branch of China Academy of Ordnance Science,Ningbo 315103,China);Line Defect and Process Improvement of Cooling Oil Path Piston[A];[C];2009
【Citations】
Chinese Journal Full-text Database 3 Hits
1 He Baoming Li Huaxing (China South Aeroengine Co. );Extrusion Cast for Aluminium Alloy Wheels of Motorcycles[J];Special Casting & Nonferrous Alloys;1998-S1
2 Wu Zongxing(Shanhai Automobile Nonferrous Casting Plant)Meng Xianjia(Shenyang Institute of Technology);Present Status of Nonferrous Alloy Casting and Strategy of Entering WTO[J];Special Casting & Nonferrous Alloys;2001-S1
3 Zhang Yuanshi Gu Xin ( Nanchang Institute of Aeronautic Technology, Nanchang, China);Developnent and Lookout of Casting Process on Light Alloy Integral Wheel for Motorbike in China[J];Special Casting & Nonferrous Alloys;2002-01
【Co-citations】
Chinese Journal Full-text Database 1 Hits
1 LIU Hong-lei,XU Bin,JI Shao-chuan(CITIC DICASTAL WHEEL GROUP.Qingdao 066003,China);T4 Heat Treatment Process of Aluminum Alloy Wheel by Low Pressure Die-casting[J];Foundry Technology;2010-10
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 Tao Hai,Zhao Xiaoju,Huang Youcheng (Sichuan Metallurgicul Institute,Chengdu 610081,China);The Application and Development of Liquid State Forging[J];Sichuan Nonferrous Metals;2002-04
2 Dang jingzhi, Cheng jun, Cheng Mei, Zhao Jianping;STUDY OF RHEOLOGIC PROPERTIES OF AI-Si ALLOYS[J];Ordnance Material Science and Engineering;1993-04
3 Fu Dingfa, Non-equilibrium institute of Central South University of Technology, Changsha, 410083., Ning Honglong, Chen Zhenhua;SPRAY DEPOSITION TECHNOLOGY AND PREPARATION OF BI-METALS[J];Ordnance Material Science and Engineering;2001-01
4 LUO Bing-hui, BAI Zhen-hai (Central South University, Changsha 410083,China);Development of high-performance aluminum alloys[J];Ordnance Material Science and Engineering;2002-03
5 JIN Xin - yan, LI Shuang - shou, LIU Xiao - gang, ZENG Da - ben, XU Xiao - zhong, LAI Jia - yan, LIU Chang - ming ( Tsinghua University, Beijing 100084, China; Knight Mg Industry Development Co. , Ningbo 315103, China);Numerical simulation of a die casting magnesium wheel[J];Ordnance Material Science and Engineering;2005-02
6 TAN Jian-bo, XING Shu-ming, ZHANG Li-zhong, ZHANG Hai-ying, LIU Wen(School of Mechanical and Electronic Control Engineering,Beijing Jiaotong University, Beijing 100044,China);A Mold Design for Semi-Solid Rheo-Forging of C Grade Steel[J];Journal of Northern Jiaotong University;2004-04
7 LI Hai_kai, ZHANG Li_zhong, HU Yuan_meng, CHEN Yu XIAO Li_ming, HAN Shu_xia (School of Mechanical and Electronic Control Engineering, Beijing Jiaotong University, Beijing 100044,China);Study on Forming of Axle Box Body of B Grade Steel by Semi-Solid Squeeze Casting[J];Journal of Northern Jiaotong University;2005-01
8 Li Di\ Zhang Qi\ Wang Dizhen\ Guo Baolan\ Zhang Yumei (Beijing University of Aeronautics and Astronautics,Dept.of Materials Science and Engineering);Study of the Simulated Test for the Intergranular Corrosion of LY12cz Al Alloy[J];JOURNAL OF BEIJING UNIVERSITY OF AERONAUTICS AND ASTRONAUTICS;1998-01
9 Zhai Qijie;Wang Qinpu(Department of Metallurgy,USTB,BeiJing 100083,PRC);Solidification Characters of ZA27 Cast Alloy[J];JOURNAL OF UNIVERSITY OF SCIENCE AND TECHNOLOGY BEIJING;1996-06
10 Haiying Zhang1), Shaming Xing1), Qinghua Zhang2), Jianbo Tan1,3), and Wen Liu1) 1) Semisolid Forming Research Center, Beijing Jiaotong University, Beijing 100044, China 2) Shijiazhuang Locomotive Depot, Shijiazhuang 050000, China 3) Department of Material and Engineering, Hebei University of Science and Technology, Shijiazhuang 050018, China;Evaluation of the mold-filling ability of alloy melt in squeeze casting[J];北京科技大学学报(英文版);2006-01
【Secondary References】
Chinese Journal Full-text Database 10 Hits
1 HU Xinping1,2, ZHAO Guoqun1, WANG Benxin3(1 School of Materials Science and Engineering, Shandong University, Jinan 250061;2 School of Mechanical Engineering, Shandong Institute of Light Industry, Jinan 250353;3 Jinan Huicheng Foundry Co. Ltd, Jinan 250100);Research Progress in Technology of Micro-structure Controlling and Strengthening under High Pressure Shaping of Al-Si Series Alloy[J];Materials Review;2008-02
2 DU Zhi-ming1,2,JIANG Ju-fu,CHENG Yuan-sheng,ZHANG Xiao-hua,WANG Qiong,CHEN Gang,JI Xing-hua,ZHAO Rui-rui (1 School of Materials Science and Engineering,Harbin Institute of Technology,Harbin 150001,China;2 State Key Laboratory for Fabrication & Processing of Non-ferrous Metals,General Research Institute for Non-ferrous Metals,Beijing 100088,China);Liquid-solid Forming Technology of Cored Valve Body with Complex Shape of Aluminum Alloy[J];Journal of Materials Engineering;2009-S1
3 PU Lei1,ZHANG Jing-hua2,ZHANG Zeng-pei3(1 School of Mechnics and Electronics Engin.,Jianghan Univ.,Wuhan 430063,China;2 Intelligent Manufacturing &Controlling Institute,Wuhan Univ.of Tech.,Wuhan 430063,China;3 Dep.of Mechanical and Electrical Engin.Weifang Vocational College,Weifang 261041,China);Squeeze Casting Mold Design Basted on Automotive Shift Fork Parts[J];Journal of Hubei University of Technology;2010-04
4 Zhang Ming Zhao Hai-dong Zhang Wei-wen Luo Zong-qiang Li Yuan-yuan(Key Laboratary for Advanced Metallic Materials Processing of Guangdong,South China Univ.of Tech.,Guangzhou 510640,Guangdong,China);Processing and Properties of Al-Cu-Mn Supporting Frame by Indirect Squeeze Casting[J];Journal of South China University of Technology(Natural Science Edition);2007-03
5 LIU Zhen-wei,LI Zhan-wei(College of Menufacturing Science and Engineering,Sichuan University,Chengdu 610056,China);Current State and Development Trend of The Liquid Forging Technology[J];Metal Materials and Metallurgy Engineering;2008-05
6 WANG Zhen-hua,YIN Zhi-xin,LIU Zhi-ke,YIN Bing-sheng(College of Mechanic Engineering,Guangxi University,Nanning 530004,China);Research of Austempering Heat Treatment for Gray Cast Iron[J];Hot Working Technology;2006-01
7 ZHAO Jianhua1,2,ZHANG Heng1,ZENG Li1(1.College of Materials Science and Engineering,Chongqing University,Chongqing 400045,China;2.National Engineering Research Center for Magnesium Alloys,Chongqing 400045,China);Application of CAE Technology in Optimization of Die Casting Process for Motorcycle Boxes[J];Hot Working Technology;2010-23
8 LUO Yizheng,WANG Jiaxuan,Fang Min,LI Wenjie(School of Aviation Manufacturing Engineering,Nanchang Hangkong University,Nanchang 330063,China);Defective Reason and Solve Method of Forming Sheet by Liquid Die Forging[J];Hot Working Technology;2011-03
9 XIAO Li-ming,ZHANG Li-zhong,ZHANG Mi-lan,HU Yuan-meng,LI Hai-kai,HAN Shu-xia(School of Mechanical and Electronic Control Engineering,Beijing Jiaotong University,Beijing 100044,China);Influence of Semi-solid Squeeze Casting Process Parameters on Properties of Components[J];Hot Working Technology;2006-01
10 Liu Pingting~1,Luo Jixiang~1, Hu Jianmin~2 (1. College of Logistic Engineering, Wuhan University of Technology, Wuhan, China; 2. Nantong Nonferrous Alloy Foundry Plant, Nantong, China);Production of High Pressure Gear Pump by Squeezing Casting[J];Special Casting & Nonferrous Alloys;2007-02
China Proceedings of conference Full-text Database 3 Hits
1 Xiaohuaqiang1 longsiyuan1,2 liaohuimin1 yuanshuai1(College of Material Science and Engineering,Chongqing University,Chongqing,400030,China);Effects of heat treatment on the microstructures and mechanical properties of squeeze cast AZ81 magnesium alloy[A];[C];2009
2 DUAN Li-ping,HOU Lin-chong,YIN Tao,XU Hong-fei (Ningbo Branch of China Academy of Ordnance Science,Ningbo 315103,China);Line Defect and Process Improvement of Cooling Oil Path Piston[A];[C];2009
3 HOU Hua (School of Material Science and Engineering of North University of China,Taiyuan,ShanXi,030051);A New Kind of FDM/FEM Squeeze Casting Temperature Field Calculation Model[A];[C];2012
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 Liu Zheng Wang Zhongguang (Institute of Metal Research,Academia Sinica,Shenyang) Wang Yue\ Li Feng\ Han Xinglin (Shenyang Polytechnic University) Friendrich Klein (German Die Casting Institute);Application and Developing Tendency of Magnesium Die Casting Alloys in Automobile Industry[J];SPECIAL CASTING & NONFERROUS ALLOYS;1999-05
2 Song Caifei (Shanghai Instrument and Meter Group Cooperation);Development Status and Prospect of Die Casting in China[J];SPECIAL CASTING & NONFERROUS ALLOYS;2000-S1
3 Xiong Yi (Nanjing Jincheng Group);Application Status and Development of Die Casting Non ferrous Alloy[J];SPECIAL CASTING & NONFERROUS ALLOYS;2000-S1
4 Huang Changyao( University of Warwick, U.K);The Prospect of the Future Development of Mg Alloy Die Casting Industry in China[J];Special Casting & Nonferrous Alloys;2001-01
5 Tang Duoguang (Shanghai University) Li Qingchun (Harbin Institute of Technology);Analysis for Defects of Al Alloy Motorbike Rim by Low Pressure Die Casting[J];SPECIAL CASTING & NONFERROUS ALLOYS;1996-03
6 Shun Boqin(The Institute of Northeast Light Alloy Fabrication Plant);Great Applied Potentialities of Magnesium Alloy Diecastings in Automobile Trade[J];SPECIAL CASTING & NONFERROUS ALLOYS;1998-03
7 Tang Duoguang(Shanghai University);A Looking Forward to the Future forLowpressure Die Casting in the 21st Century[J];SPECIAL CASTING & NONFERROUS ALLOYS;1998-04
8 Qi Pixiang(Ningbo Branch, No.52 Research Institute);Squeeze Casting Technology Geared to the 21st Century[J];SPECIAL CASTING & NONFERROUS ALLOYS;1998-04
9 Wang Yizhi (Shanghai Jiaotong University);The Worldwide Market of Aluminium Castings[J];SPECIAL CASTING & NONFERROUS ALLOYS;1999-01
10 Zhang YongzhongZhang KuiFan JianzhongLiu Guojun(Beijing General Research Institute for Nonferrous Metals)Cui DaijinWu XupingCui BoZheng YuxinLei Jian(Dong Feng Motor Corporation);Magnesium DieCasting Alloys andTheir Applications in Automotive Industry[J];SPECIAL CASTING & NONFERROUS ALLOYS;1999-03
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved