Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Engineering Journal of Wuhan University》 2007-01
Add to Favorite Get Latest Update

Finite element analysis of large and complex set-shaped steel formwork structure

PENG Weiping1,ZHENG Haibin1,YAN Xi2,YANG Yu2(1.School of Power and Mechanical Engineering,Wuhan University,Wuhan 430072,China;2.The Seventh Bureau of Sinohydro Corporation,Pengshan 620860,China)  
Taking the set-shaped steel formworks used for concrete lining of curved tunnel-guide in the Pengshui Hydropower Station for example,a method of finite element modeling,restraint and analysis of a large and complex set-shaped steel formwork is discussed.Finite element models for set-shaped steel formworks analysis in the condition of different lining segments and supports are built,which include regular-approximately rectangle mesh cells and the nonlinear boundary conditions from supports and surface-formworks contact,and hold space joints of components availably.Based on the models,stress and strain of set-shaped steel formworks in different conditions is computed.By analyzing,calculating and comparing,the results in four typical conditions are described.The results can be regarded as the basis of structure optimization and support design of the set-shaped steel formwork.
【CateGory Index】: TV34
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
Chinese Journal Full-text Database 1 Hits
1 ;Finite Element Analysis of Mould Plate Trolley[J];Construction Machinery and Equipment;2003-12
Chinese Journal Full-text Database 10 Hits
2 LIANG Yuan sen 1,XU Jian she 1,WANG Bu 1,LI Ying qing 2 (1.Department of Structural and Building Engineering,Tongji University,Shanghai 200092,China; 2.The City Construction Committee of Zhengzhou,Zhengzhou 450052,China);The problem of plastic overdeformation on the use of the plastic behavior of the flexural member in steel structure[J];Building Science Research of Sichuan;2003-01
3 HAN Jian-ping,LI Hui,SU Chang-ji(College of Civil Engineering,Lanzhou University of Technology,Lanzhou730050,China);Reasonable selection of section of the welded I-shaped column under axial compression[J];Building Science Research of Sichuan;2004-04
4 CHENG Xuansheng,DU Yongfeng(College of Civil Engineering,Lanzhou University of Technology,Lanzhou 730050,China);Confirm of elasticity cofficient about or thotropic plates of reinforced-concrete[J];Sichuan Building Science;2006-05
5 Wang Zhiyong (Beijing Zhongse North Architecture Design Institute,100041, Beijing, China);Design of the Trestle Bridge[J];Journal of North China University of Technology;2001-03
6 LU Jing,XU Guobin,WANG Yuedong (School of Civil Engineering and Architecture, Northern Jiaotong University, Beijing 100044,China);An Exploration on Structural Design of Retractable Roof Structure in the Main Gymnasium of Olympic Games[J];Journal of Northern Jiaotong University;2003-04
7 LU Jing,XU Guo-bin,WANG Yue-dong (School of Civil Engineering and Architecture, Beijing Jiaotong University, Beijing 100044,China);Optimal Design of Tension-Compression Cable Dome on Anshan Athletics Center[J];Journal of Northern Jiaotong University;2004-01
8 LI Zhan-hou1, ZHANG Zhong1,YANG Bao-zhan2(1 Steel Structure Company of The Second Metallurgical Construction Company of China, Baotou 014010, Nei Monggol,China;2.Furnace Building Company of The Sceond Metallurgical Construction Company of China,Baotou 014010,Nei Monggol,China);Welding deformation control in manufacturing H shaped steel beam[J];Science & Technology of Baotou Steel(Group) Corporation;2005-01
9 LIU Huai-ren, XU Chen-yang, CHI Pei-qun(Kaijie Construction Engineering Co., Ltd. of Baotou Steel (Croup) Corporation, Baotou 014010, Nei Monggol, China);Integral moving technique of 3200-ton blast furnace[J];Science & Technology of Baotou Steel(Group) Corporation;2005-06
10 ;Research and Manufacture Honeycomb Girder in Gantry Crane Two-way Run in Lengthwise and Sidewis[J];Chongqing Architecture;2004-03
China Proceedings of conference Full-text Database 2 Hits
1 Bao Ying (Engineering and Researching Institute of Anshan Iron and Steel Group Corporation,Anshan,114021);Optimizing the Steel Structure Building Design in Rolling Strip Line Project in Group[A];[C];2009
2 Zhang Dong (AISC Design and Research Institute,Anshan,114021);Produce to Use the Function the Old Design in Benefit in Construction in Factory Premises after Changing[A];[C];2009
Chinese Journal Full-text Database 10 Hits
1 HU Ying-chun~1,LI Shang-ping~2,PEI Shao-shuai~3,CHEN Shu-xun~4(1.Department of Computer Engineering,Guangxi University of Technology,Liuzhou 545006,China;2.Department of Mechanical Engineering,Guangxi University of Technology,Liuzhou 545006,China;3.The Fourth Academy of China Aerospace Science & Industry Corporation,Xi'an 710025,China;4.College of Mechanical Engineering,Guangxi University,Nanning 530004,China);Research on new and highly-effective methodology for structure optimization[J];Journal of Engineering Design;2007-01
2 Peng Yunqi(Shuikoushang Kangjiawan Pb-Zn Mine);Practice of Replacing Main Rope and Cage Guide Rope for Multirope Friction Winder[J];HUNAN NONFERROUS METALS;1997-06
3 HAN JianBao~(1) LI BangGuo~(1) GONG XueLian~(2) ZHAO Chen~(2) (1.School of Mechanical & Vehicular Engineering,Beijing Institute of Technology,Beijing 100081,China) (2.Beijing North Vehicle Group Corporation,Beijing 100072,China);STUDY ON STRUCTURAL PROPERTIES OF AN ARMORED VEHICLE BODY BY FEM SIMULATION[J];Journal of Mechanical Strength;2006-05
4 TAN PengHui;Study to Rapid Replacement Device for First Rope of Multi Rope Friction Hoist[J];Mining & Processing Equipment;2004-11
5 REN min-jie (Zhejiang Construction Vocational and Technical College, Hangzhou, Zhejiang, 311231);Reliability Design of Drive Conical Wheel on Steelball-External Conical Wheel Variable Speed Transmission[J];Journal of Ningbo College;2004-02
6 WANG Yong~1, MENG Li-ping~2, WANG Bing~3, YUE Yong~3, CHEN Ye~3(1. Design Institute, Yanzhou Mining Group Co. Ltd., Zoucheng 273500, China; 2. Zhongmei No. 68 Engineering Department, Zoucheng 273500, China; 3. Xinglongzhuang Coal Mine, Yanzhou Mining Group Co. Ltd., Zoucheng 272000, China);The Construction Experience of Changing Main Ropes for Multi-rope Friction Hoist[J];Colliery Mechanical & Electrical Technology;2005-02
7 DU Hua (Dawan Coal Mine of Shuicheng Mine Indrustry Group Limited Liability Company,Liupanshui 553013,China);Changing ropes methods of multi-rope friction winder[J];Coal Mine Machinery;2002-03
8 JIA Meng(Longgu Coal Mine,Jiangsu Tianneng Group Corporation,Xuzhou 221613,China);Method about Replacing Promote a Cage of Multirope Friction Hoist[J];Coal Mine Machinery;2005-11
9 ZHANG Guo-fen;Structural design and finite element analysis of SGA92150 semi-trailer's frame[J];Hoisting and Conveying Machinery;2007-03
10 ZHAO Bi,BA Peng,Xu Ying-feng(Shengyang Ligong Universty,Shenyang 110168,China);Design And Analysis of the Finer's Structure of Pneumatic Manipulator[J];Transactions of Shenyang Ligong University;2006-06
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved