Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Journal of Vibration and Shock》 2015-04
Add to Favorite Get Latest Update

Application of vibratory stress relief in relaxation of residual stress for expandable corrugated liners

LIU Xiao-dan;TAO Xing-hua;HAN Zhen-qiang;SINOPEC Research Institute of Petroleum Engineering;College of Petroleum Engineering,China University of Petroleum;  
The bigger residual stress can be left in expandable corrugated liners after their cold press molding. This leads to both the serious deformation and the unstable sizes at the liner ends. This defect becomes the techinical bottleneck to restrict welding quality and efficiency of liners connection. Here,a feasible method was proposed to remove the residual stress in the liner as much as possible. A set of crucial techniques,parameters,assessing methods,and post-processing methods based on plenty of data obtained from tests and sites was developed for the vibratory stress belief method. The new assessing system was used to verify the effectiveness of the vibratory stress belief effects through monitoring the parameter curves of the vibratory stress belief and residual stress measured with the blind-hole method. The results showed that the proposed method can be applied to decrease residual stress greatly in liners,it can meet the requirements of corrugated liners welding.
【CateGory Index】: TE92
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【Citations】
Chinese Journal Full-text Database 4 Hits
1 Tao Xinghua1 Ma Kaihua1 Wu Bo2 Yang Shunhui1(1.Dezhou Petroleum Drilling Research Institute,Petroleum Exploration & Development Academy,Sinopec,Dezhou,Shandong,253005,China;2.Drilling Engineering Department,Jiangsu Petroleum Exploration Bureau,Shaobo,Jiangsu,225200,China);Summary of Expandable Bellows Field Test and Existing Problem Analysis[J];Petroleum Drilling Techniques;2007-04
2 TAO Chun1,YUAN Haiyang2,HU Yonghui3(1.Department of Mechanical Engineering,Liuyang Vocational School,Liuyang 410327,China;2.Department of Mechanical and Electrical Engineering,Hunan College of Information,Changsha 410200,China;3.Mechanical and Electrical Engineering,Central South University,Changsha 410083,China);Application of VSR in Welded Sheet of Low-alloy High-strength Steel[J];Hot Working Technology;2012-15
3 SHEN Hua-long, WU Yun-xin, GUO Jun-kang (College of Mechanical & Electronical Engineering,Central South University,Changsha 410083, China);VSR technology used in high intensity aluminum alloy thick plates[J];Journal of Vibration and Shock;2009-08
4 LIAO Kai1,2,3,WU Yun-xin2,GUO Jun-kang2(1.School of Mechanical and Electrical Engineering,Central South University of Forestry and Technology,Changsha 410004,China; 2.School of Mechanical and Electrical Engineering,Central South University,Changsha 410083,China; 3.Guilin University of Electronic Technology,Guilin 541004,China);Application of VSR technique in stress reduction of aluminum alloy thick plate and its limitation[J];Journal of Vibration and Shock;2012-14
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 Lin Dekuan TongJixiong Lin Qihui (Northwestern Polytechnical University);INTERNAL STRESSES IN INJECTION—MOULDED POLYSTYRENE[J];Engineering Plastics Application;1989-02
2 Chen Gang Zhang Lei Wu Baoqiao Zhong Bin Wu Yongzhong(Maanshan Iron & Steel Co.Ltd.);The Effect of Shot Peening on the Distribution of Circumferential Residual Stress on the Web Surface of S-plate Wheel[J];Anhui Metallurgy;2009-04
3 Wang Bin\ Zhu Jusheng (Department of Material Management Engineering,Northern Jiaotong University, Beijing 100044);A Study on the Roller Bearing Crackle of the Railroad Freight Car[J];JOURNAL OF NORTHERN JIAOTONG UNIVERSITY;1996-05
4 LIU Ju-dong~(1,2),WANG Gui-cheng~2,CHEN Kang-min~3,JIA Zhi-hong~3(1.School of Mechanical Engineering,Jimei University,Xiamen 361021,Fujian,China;2.School of Mechanical Engineering,Jiangsu University,Zhenjiang 212013,Jiangsu,China;3.School of Materials Science and Engineering,Jiangsu University,Zhenjiang 212013,Jiangsu,China);A Study of Surface Hardening Based on Creep-Feed Wet Grinding[J];Acta Armamentarii;2006-03
5 ZHANG Yi-liang HUANG Hui-ru LI Xiang (College of Mechanical Engineering and Applied Electronics Technology,Beijing University of Technology,Beijing 100022,China);Research on Distribution of Turning Residual Stress[J];Journal of Beijing University of Technology;2006-07
6 Zhao Lili\ Zhang Yidu(School of Mechanical Engineering and Automation, Beijing University of Aeronautics and Astronautics, Beijing 100083, China);Computer simulation of residual stress for cold rolling prestrectching board[J];Journal of Beijing University of Aeronautics and Astronautics;2004-07
7 Zhao Lili Zhang Yidu(School of Mechanical Engineering and Automation,Beijing University of Aeronautics and Astronautics,Beijing 100083,China);FEM simulation for residual stress in quenched aeronautics aluminum alloy thick-plate based on rolled residual stresses distribution[J];Journal of Beijing University of Aeronautics and Astronautics;2006-01
8 Zhao Xiaoci Zhang Yidu Zhang Hongwei(School of Mechanical Engineering and Automation,Beijing University of Aeronautics and Astronautics,Beijing 100191,China);Simulation analysis of plastic deformation and residual stress distribution of radial ring rolling[J];Journal of Beijing University of Aeronautics and Astronautics;2008-09
9 Wang Qiang1,CHEN Xue-mei2,ZHANG Wen-guang2,WANG Xin1 (1.Beijing Institute of Aeronautical Material,Beijing 100095;2.Chengdu Aircraft Industry Corporation,Chengdu 610092);Residual Stress Induced by Cold Expansion With Sleeve Process of A-100 Steel[J];China Surface Engineering;2011-05
10 MAO Hong-ming1,MA Yong-lin1,2,LI Hui-qin1(1.Material and Metallurgy School,Inner Mongolia University of Science and Technology,Baotou 014010,China;2.The State Key Laboratory of Rolling and Automation,NEU,Shenyang 11006,China);FEM analysis of two times back and forth cold-rolled thin strip[J];Journal of Inner Mongolia University of Science and Technology;2010-01
China Proceedings of conference Full-text Database 4 Hits
1 WANG Zhao-yu~(1,2),LI Guo-lu~1,WANG Hai-dou~2,LIU Jin-hai~1,XU Bin-shi~2,KANG Ja-jie~2 (1.College of Materials Science and Engineering,Hebei University of Technology,Tianjin 300130,China;2.National Key Laboratory for Remanufacturing,Academy of Armored Forces Engineering,Beijing 100072,China);Research Progress of Residual Stress Measuring by Moire Interferometry[A];[C];2011
2 Chen Mingfeng Liang Zongmin Gao Yue (China Agricultural University,100083);The Endurence of Residual stresses in Members[A];[C];2010
3 CHEN Zai-liang L Dong-xian CAO Ming-yu FU Hai-feng (Beijing Research Institute of Mechanical and Electrical Technology,Beijing 100083,China);Study on Residual Stress and Crack Failure in Metal Heat Treatment[A];[C];2007
4 GAO Yu-kui (Beijing Institute of Aeronautical Materials,Beijing 100095,China);Shot-peened surface residual stress relaxationduring fatigue for ultra-high strength steel[A];[C];2007
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 Zhao Zhenye, Li Zhi, Liu Tianqi, Zhu Jieyuan (Beijing Institute of Aeronautical Materials, Beijing 100095, China)[;Studying the New Strength-toughen Mechanisms, Developing a New Field of Ultra-high Steel[J];Engineering Science;2003-09
2 CHEN Leng,ZHANG Qing-hui,MAO Wei-min(Department of Materials, University of Science and Technology Beijing, Beijing 100083, China);Analysis and computation of residual stresses mapping based on X-ray two-dimensional diffraction[J];Transactions of Materials and Heat Treatment;2006-01
3 GONG Hai,WU Yun-xin,LIAO Kai(College of Mechanical and Electrical Engineering,Central South University,Changsha 410083,China);Influence of pre-stretching on residual stress distribution in 7075 aluminum alloy thick-plate[J];Transactions of Materials and Heat Treatment;2009-06
4 LI Ji shan,HU Wan hua (Mechanical Engineering Department,East China Jiaotong University,Nanchang 330013,China);Residual Stress Relief in Welded Seam Using VSR[J];Heat Treatment of Metals;2001-02
5 Chen Ligong,Ni Chunzhen,Liu Yiping,Luo Ruiling (Departmant of Materials,Shanghai Jiaotong University,Shanghai 200030) Shao Junquan,Li Hui (Shanghai No.1 Machine Tool Factory);VSR and Heat Treatment of Welded Stainless Steel Part[J];HEAT TREATMENT OF METALS;1997-08
6 MA Zhen-yu,LU Ya-ping,J IA Shu-shi(The College of Mechanical and Energy Engineering,zhejiang university,Hangzhou310027,China);The Study of VSR's Micro Mechanism[J];Mechanical Engineer;2003-02
7 LU Ya ping 1, MA Zhen yu 2, JIA Quan shi 2, GU Rong rong 2 ( 1Ningbo Higher Occupation College, Ningbo 315016; 2Zhejiang Unversity, Hangzhou 310027) P587;Research on Vibratory Stress Relief Mechanism[J];Mechanical Science and Technology;2001-04
8 HU Yonghui,WU Yunxin,GUO Junkang(College of Mechanical and Electrical Engineering,Central South University,Changsha 410083,China);Relaxation Rule of Residual Stress on Shot-peening Surface of 7075 Aluminum Alloy During Fatigue[J];Hot Working Technology;2010-18
9 Zhang Yanping,Tian Jun,Zhao Zhiqiang,Zeng Quanxian,Yu Ping(Drilling and Production Technology Research Institute of Exploration and Development Headquarters of Tuha Oilfield, Hami 838202,Xinjiang);APPLICATION OF BELLOWS SEALING TECHNIQUE FOR WELL L7-71 IN TUHA OILFIELD[J];Oil Drilling & Production Technology;2005-01
10 YANG Li-ming,REN Teng-yun,ZHANG Hong-jun,ZHANG Wei,TIAN Shan-ze,WEI Wen-xing.YANG Li-ming,Shengli Oilfield Co.Ltd,Dongying 257001,Shandong,China;Application of corrugated flexible liner in Shengli Oilfield.[J];Oil Drilling & Production Technology;2006-03
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved