Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Journal of Vibration and Shock》 2015-16
Add to Favorite Get Latest Update

Experimental study on the identification of cutting chatter based on its chaotic characteristics

MAO Han-ying;LIU Chang;LIU Yong-jian;MAO Han-ling;College of Automobile and Transportation, Guangxi University of Science and Technology;College of Mechanical Engineering,Guangxi University;  
Because the cutting chatter is a nonlinear behavior,it is difficult to identify and predict the chatter phenomenon with the traditional signal processing method. A number of groups of cutting tests were designed and made under different spindle speeds and cutting depths. The vibration acceleration signals of the whole process from stable cutting to chatter were detected. The chaotic characteristics of the signals were analyzed by virtue of the correlation dimension,largest Lyapunov exponent and Kolmogorov entropy. It is demonstrated that the evolution of a sharp rise during chatter gestation can be revealed by all the three chaotic characteristics individually. The multi chaotic characteristics analysis might be the new direction for the identification and prediction of the cutting chatter.
【Fund】: 国家自然科学基金(51365006 51445013);; 南宁市科技计划项目(20131067 20130950)
【CateGory Index】: TG506
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【Citations】
Chinese Journal Full-text Database 10 Hits
1 Tang Ying,School of Mechanical Engineering,University of Science and Technology Beijing,Beijing 100083,China Zhang Dayong;Summary of Key Technologies on Cutting Chatter Research[J];Tool Engineering;2011-08
2 CHEN Zhan-yi,YUAN Jun-tang,WANG Zhen-hua,HUANG Jun(Nanjing University of Science and Technology,Nanjing 210094,China);Chatter recognition and stability prediction of high speed milling[J];Transducer and Microsystem Technologies;2013-03
3 YU Bo,LI Ying-hong,ZHANG Pu(The Engineering Institute,Air Force Engineering University,Xi'an710038,China);Application of Correlation Dimension and Kolmogorov Entropy in Aeroengine Fault Diagnosis[J];Journal of Aerospace Power;2006-01
4 WANG Wei jun 1, CHEN Jin 1, WU Zhao tong 2, JIANG Ming 1 (1.State Key Lab. of Vibration, Shock & Noise,Shanghai Jiaotong Univ.,Shanghai 200030,China; 2.Dept. of Mechanical Eng., Zhejiang Univ., Hangzhou 310027);Calculation of Correlation Dimension and Its Application to Large Rotating Machinery Fault Diagnosis[J];JOURNAL OF SHANGHAI JIAOTONG UNIVERSITY;2000-09
5 Lü Kaibo,JING Minqing,ZHANG Yongqiang,LIU Heng,LI Meng(School of Mechanical Engineering,Xi′an Jiaotong University,Xi′an 710049,China);Analysis and Implementation for Technique for Cutting Chatter Monitoring[J];Journal of Xi'an Jiaotong University;2011-11
6 Yang Zhichun,Zhang Ruili(College of Aeronautics,Northwestern Polytechnical University,Xi'an 710072,China);Analysis of Panel Thermal Flutter Using Maximum Lyapunov Exponent[J];Journal of Northwestern Polytechnical University;2009-06
7 Zhang Zhengkai Xue Song Zhang Youyun (Theory of Lubrication and Bearing Institute,Xi'an Jiaotong University Xi'an,710049,China);Intelligent Fault Diagnosis of Rotating Machinery Using Characteristic Parameters[J];Journal of Vibration, Measurement & Diagnosis;2009-03
8 Kong Fansen Yu Junyi (College of Transportation Engineering,Jilin Technology University Changchun,130022)Gou Zhijian (Jilin Institute of Technology Changchun, 130012);Fuzzy Recognition of a Chatter State[J];JOURNAL OF VIBRATION ENGINEERING;1998-03
9 LI Zheng, LIUQiang (School of Mechanical Engineering and Automation, Beihang University, Beijing 100083, CHN);Chatter Recognition System of NC Machining Based on Analysis on Audio Signal[J];Manufacturing Technology & Machine Tool;2009-02
10 Wu Shi,Liu Xianli,Xiao Fei(School of Mechanical and Power Engineering,Harbin University of Science and Technology Harbin,150080,China);Experimental Study of the Nonlinear Characteristics of Vibration in Milling Chatter[J];Journal of Vibration, Measurement & Diagnosis;2012-06
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 LIU Zhi-bing,WANG Xi-bin(Key Laboratory of Fundamental Science for Advanced Machining,Beijing Institute of Technology,Beijing 100081,China);An Experimental Study on Non-linear Characteristic of Vibration Signal in Micro-end-milling Process[J];Acta Armamentarii;2010-01
2 CONG Rui1,GAO Xue-liang2,LIU Shu-lin1,MA Rui1,WANG Hui1(1.Mechanical Science and Engineering College,Daqing Petroleum Institute,Daqing,Heilongjiang,163318,China;2.Oil Recovery Plant No.4,Daqing Oilfield Corp.Ltd.,Daqing,Heilongjiang 163511,China);Application to fault diagnosis of reciprocating compressor based on emprical mode decomposition and correlation dimension[J];Journal of Daqing Petroleum Institute;2008-02
3 LI Wei,LIU Wen-li,CHEN Yu-wu(School of Electrical and Information Engineering,Lanzhou University of Technology,Lanzhou 730050,Gansu Province,China);Application of Correlation Dimension in Transmission Line Fault Detection and Classification[J];Power System Technology;2009-20
4 Xiong Liangshan Chen Yongjie Shi Hanmin;Modeling and Measurement of Cutting Angles of Drills with Arbitrary Point Geometry Based on Planar Displaying Method[J];Tool Engineering;2007-12
5 Sun Yerong,Yao Bin Sun Yerong,School of Technology,Anhui Science and Technology University,Fengyang,Anhui 231000,China;Research on NC Machining Technology Based on Cutting Tool with Forward and Backward Motion[J];Tool Engineering;2009-08
6 Tang Ying,School of Mechanical Engineering,University of Science and Technology Beijing,Beijing 100083,China Zhang Dayong;Summary of Key Technologies on Cutting Chatter Research[J];Tool Engineering;2011-08
7 LI Wei1,LIU Wen-li2,CHEN Yu-wu1(1.College of Electrical and Information Engineering,Lanzhou Univ.of Tech.,Lanzhou 730050,China;2.Department of Electrical Engineering,Lanzhou Polytechnical College,Lanzhou 730050,China);Application of correlative dimension analysis in fault classification and location of transmission line[J];Journal of Lanzhou University of Technology;2010-01
8 Gao Ruiqian1 Gan Xinnian2 Yan Yuanjiang1(1.Equipment Department of the Navy,Baoji 721006,China;2.No.91640 Troops of PLA,Zhanjiang 524064,China);Study on aero-engine fault diagnosis based on chaotic feature[J];Foreign Electronic Measurement Technology;2011-03
9 KONG Tian-rong, MEI De-qing, CHEN Zi-chen (Zhejiang Province Key Laboratory of Advanced Manufacturing Technology, Institute of Advanced Manufacturing Engineering, Zhejiang University, Hangzhou 310027, China);Suppression of chatter for precision hole boring based on variable structural stiffness[J];Optics and Precision Engineering;2009-12
10 NIE Jianhua,SI Wei (School of Electrical Engineering and Information,Anhui University of Technology,Anhui Ma′anshan 243002,China);The method for prediction of chatter based on the vibration signal processing[J];Industrial Instrumentation & Automation;2009-04
China Proceedings of conference Full-text Database 5 Hits
1 LIU Ya (AVIC China Aviation Powerplant Research Institute,Zhuzhou 412002,China);A Brief Analysis About the Application of the Fractal Theory Used for The Fault Diagnosis of Aeroengine Vibration[A];[C];2010
2 LIU Ya,WU Wei-li (AVIC Aviation Powerplant Research Institute,Zhuzhou 412002,China);Gear Vibration Failure Mode Identification Based on Correlation Dimension[A];[C];2010
3 Zhang Qinghu,Gao puyun (National University of Defense Technology,Changsha 410073);Principle and Progress of Fault Diagnosis on Nonlinear Dynamical[A];[C];2009
4 CHEN Shu-guang, LIU Ping, TIAN Bao-hong (School of Material Science and Engineering, Henan University of Science and Technology, Henan Luoyang 471003, China);Research on Surface Roughness in Cutting of HPb61-2.5-0.5-0.2 Brass[A];[C];2005
5 MAO Xiang-dong;YUAN Hui-qun;SUN Hua-gang;Northeastern University;Ordnance Technology research Institute;;Correlation Dimension and Phase Track Application in Gear Status Discrimination and Comparative Analysis[A];[C];2014
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 SHI Li,CHEN Er-tao,JIANG Zeng-hui(School of Mechenical Engineering,Shenyang Ligong University,Shenyang 110168,Liaoning,China);Test Analysis on Vibration Signal of Thin Aluminium-alloy Cylinder Machined with Orthogonal Turn-Milling[J];Acta Armamentarii;2009-03
2 WANG Min, LI Nan-jing, YUAN Wei-jun, XIE Chun-liu, FEI Ren-yuan ( 1. College of Mechanical Engineering and Applied Electronics Technology, Beijing University of Technology, Beijing 100022, China; 2.Beijing Plant of Watchmaker's Machinetools, Beijing 100078, China );Computer Simulation and Experimental Study on the Stability of Milling Processes[J];Journal of Beijing Polytechnic University;2003-03
3 Zhang Wenming; Li Li; Shen Yanhua; Wang Ying; Zhang Weigang(College of Resources Engineering, USTB, Beijing 100083, PRC);Fractal in Fault Diagnosis of Rolling Bearings[J];JOURNAL OF UNIVERSITY OF SCIENCE AND TECHNOLOGY BEIJING;1996-03
4 LI Guobin,GUAN Delin (College of Marine Engineering,Dalian Maritime University,Dalian 116026,China);The Improved Multifractal Analysis Algorithm for Vibration Signal[J];Journal of Test and Measurement Technology;2006-06
5 Wang Ning Sheng Zhaohan (College of Economics and Management, Southeast University, Nanjing 210018);Application of Wavelet Transform in Identifying Orbits of Shaft Centerline[J];Journal of Southeast University;1997-03
6 HUANG Qiang1,2,ZHANG!Gen-cao1,ZHANG Xin-yu1,CAO Dong-feng1(1.College of Mechanical Engineering,Chongqing University,Chongqing 400030,P.R.China;2.College of Automobile,Chongqing Institute of Technology,Chongqing 400050,P.R.China);The chatter vibration process of machine tools[J];Journal of Chongqing University;2008-04
7 Tang Ying,Chen Ze,Wu Quan ,Doctor,Associate Professor,School of Mechanical Engineering,Beijing University of Science and Technology,Beijing 100083,China;Experimental Study of High Speed Micro-drilling on Hardened Steel[J];Tool Engineering;2011-02
8 Wu Qingwen(changchun Institute of Optics&Fine Mechnics,Chinese Academy of Sciences, Changchun130021)Gou Zhijian(Department of Mechanical Engineering,‘Jilin Institute of Technology, changchun 130012);An Overview on the Identification ,Prediction and Control Chatter(IPCC)During the Metal Machining Process[J];OPTICS AND PRECISION ENGINEERING;1995-01
9 NIE Jianhua,SI Wei (School of Electrical Engineering and Information,Anhui University of Technology,Anhui Ma′anshan 243002,China);The method for prediction of chatter based on the vibration signal processing[J];Industrial Instrumentation & Automation;2009-04
10 SHI li~1,JIA Chun-de~1,SUN Yu-long~2(1.Engineering and Technology Center for High Speed Machining,Shenyang Ligong University,Shenyang 110016,China;2.Shenyang Jinbei Jonhson Controls Automative Interiors Co.Ltd,Shenyang 110168,China);Research on dynamic milling force with wavelet analysis and forecasting milling chatter[J];Journal of Harbin Institute of Technology;2006-10
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved