Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Journal of Vibration and Shock》 2015-16
Add to Favorite Get Latest Update

Influence of rolling lubrication on the self-excited vibration of rolling mill main drive system

CHEN Cheng;LI You-rong;The key laboratory for metallurgical equipment and control of ministry of education,Wuhan University of Science and Technology;  
In order to research the mechanism of self-excited vibration in rolling process of F2 rolling mill production in a hot strip mill set and to eliminate the self-excited vibration of rolling mill,the main drive system of the rolling mill was simplified into two single degree of freedom systems with equal natural frequency,and the nonlinear dynamical equations of a twist vibration model of the main drive system were established. The progressive method was used to solve the nonlinear dynamical equations. The results of simulation analysis draw the following conclusions: due to the unstable rolling lubrication, the friction in rolling deformation zone declines and causes the negative damping phenomenon,resulting in the self-excited vibration of the mill. Through the field test and theoretical analysis,it is found:reasonable changes of the dynamic viscosity of rolling lubricating liquid and rolling speed can avoid the appearance of negative damping and eliminate the self-excited vibration of the mill.
【Fund】: 国家自然科学基金资助项目(51105284)
【CateGory Index】: TG333
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
Chinese Journal Full-text Database 6 Hits
1 LIU Hao-ran1,ZHANG Ye-kuan1,LI Xiao-mei2,LIU Shuang1(1.College of Information Engineering,Yanshan University,Qinhuangdao 066004,China;2.College of Electrical Engineering,Yanshan University,Qinhuangdao 066004,China);Investigation and suppression of impact torsional vibration of a rolling mill’s nonlinear drive system[J];振动与冲击;2010-07
2 LI Shen, ZHAO Shu-sen(School of mechanical Engineering & Automation, Northeastern University, Shenyang 110004);STUDY ON SUBSTRUCTURE METHOD FOR TORSIONAL VIBRATION OF A BRANCH SHAFTING SYSTEM[J];振动与冲击;2007-10
3 Ma Weijin1 Li Fenglan 2 Xiong Shibo 3(1 College of Mechanical Engineering and Automatization, North University of China Taiyuan, 030051, China)(2 College of Mechanical Engineering, Taiyuan University of Technology Taiyuan, 030024, China)(3 Mechano-Electronic Institute, Taiyuan University of Technology Taiyuan, 030024, China);Analysis and Diagnosis of Self-Excitation-Vibration of Hot Rolling Mill[J];振动、测试与诊断;2006-04
4 YU Ying-wen, YUAN Qing-ke(Guangdong University of Technology, Guangzhou510090, China);Research on calculating method of shafting torsional vibration and analytical software development[J];机电工程技术;2005-08
5 SHI Xu LIU Xiang-hua WANG Guo-dong ( State key Lab of Rolling and Automation, Northeastern University, Shenyang 110004 China);The friction and its influence on the rolling force in cold thin strip rolling[J];塑性工程学报;2005-03
6 Song Jisheng;Wang Manxing;A Study on the Coefficient of Friction in Rolling[J];中南矿冶学院学报;1980-01
Chinese Journal Full-text Database 10 Hits
1 LING Qi-hui;YAN Xiao-qiang;ZHANG Yi-fang;School of Mechanical Engineering,University of Science and Technology Beijing;College of Mechanical and Electric Engineering,Hunan University of Science and Technology;Maanshan Iron and Steel Co.Ltd.;;Research on nonlinear horizontal vibration suppression of the hot continuous rolling mill[J];长安大学学报(自然科学版);2015-06
2 CHEN Cheng;LI You-rong;The key laboratory for metallurgical equipment and control of ministry of education,Wuhan University of Science and Technology;;Influence of rolling lubrication on the self-excited vibration of rolling mill main drive system[J];振动与冲击;2015-16
3 SHI Pei-ming;XIA Ke-wei;LIU Bin;HOU Dong-xiao;College of Electrical Engineering,Yanshan University;Department of Automatic Engineering,Northeastern University at Qinghuangdao;;Non-main resonance characteristics of nonlinear torsional vibration of rolling mill's multi-degree-of-freedom main drive system[J];振动与冲击;2015-12
4 GAI Lifeng;Hebei Energy College of Vocation and Technology;;Automation representation of spatter in resistance spot welding of steel for automobile based on the load signal characteristics[J];电焊机;2015-06
5 Li zhi-lei;Offshore Oil Engineering Co.,Ltd.;;Calculation on Shafting Torsion Vibration Based on Oil Film Rigidity of Gearbox[J];船舶设计通讯;2015-01
6 Yu Chen;Pan Ziwei;Ye Jinjie;Institute of Mechanical Engineering,Anhui University of Technology;Department of Mechanical Engineering,Maanshan Professional Technical College;;Influence of the HAGC System Dynamic Response for Rolling Mill Vibration[J];冶金设备;2015-01
7 LIU Zhi-qiang;LI Fu-cai;CHEN Kai;XIE Wan-qiang;QUAN Ji-zhe;CHEN Xiao-ming;State Key Laboratory of Mechanical System and Vibration, Shanghai Jiaotong University;Baosteel Research Institute;;Vibration Data Acquisition and Alarm Judgment System of Cold-rolling Mills[J];噪声与振动控制;2014-06
8 WANG Jia-wei;YANG Ya-fei;QIAN Yu-heng;Experiment and Teaching Center for Flight Vehicle Control,Harbin Institute of Technology;;The Controller Design for Torsion Vibration Device Based on LQR Method[J];实验室研究与探索;2014-11
9 YE JIA;LI Tao;ZENG Zhi-long;CHEN Yi;Navy Representative Office at Shanghai Marine Equipment Research Institute;Shanghai Marine Equipment Research Institution;;Review of Research on Shafts' Torsional Vibration Measurement[J];船舶工程;2014-05
10 Zhang Ruicheng;Yang Pingping;Cui Chuanjin;College of Electrical Engineering,Hebei United University;Qinggong College,Hebei United University;;Hopf Bifurcation for Nonlinear Delay System of Rolling Mill Main Drive[J];振动.测试与诊断;2014-05
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 Shi Pei-Ming Liu Bin Hou Dong-Xiao(College of Information Science and Engineering,Yanshan University,Qinhuangdao 066004,China);Chaotic motion of some relative rotation nonlinear dynamic system[J];物理学报;2008-03
2 Meng Zong Liu Bin(Institute of Electrical Engineering,Yanshan University,Qinhuangdao 066004,China);Stability of equilibrium state of a kind of nonlinear relative rotation dynamic system and associated harmonic approximate solution[J];物理学报;2008-03
3 Shi Pei-Ming Liu Bin(College of Information Science and Engineering,Yanshan University,Qinhuangdao 066004,China);Stability of nonlinear dynamical system of relative rotation and approximate solution under forced excitation[J];物理学报;2007-07
4 Qu Zhihao~1 Chai Shaokuan~1 Ye Qianyuan~2(1.Shanghai Institute of Technology,Shanghai 200235;2.University of Shanghai and Technology,Shanghai 200093);ANALYSIS OF DYNAMIC CHARACTERISTICS AND CHATTER OF A 1420 COLD TANDEM ROLLING MILL[J];振动与冲击;2006-04
5 JI Chen ZENG Fan-mingSchool of Naval Architecture and Power Naval University of Engineering Wuhan 430033;Study on the general model and system matrix method for torsion vibration calculation of complex shafting[J];船海工程;2006-04
6 Wei Haijun (Marine engineering college, Dalian Maritime University, Dalian 116026);MODIFICATION OF SOME FORMULAS FOR CALCULATING SHAFT TORSIONAL VIBRATION[J];振动与冲击;2006-02
7 WEN Xin-xin, WANG Kai-he, SHENG Tao, BU Yan ( College of Mechanical Engineering, Tianjin University of Science & Technology, Tianjin 300222, China);Study on Correlation of Structural Modal Analysis[J];天津科技大学学报;2006-01
8 Ma Jianmin Ray P.S. Han (Department of Mechanics & Engineering Science, Fudan University, Shanghai 200433);INFLUENCE OF NONLINEAR STIFFNESS OF FLEXIBLE COUPLING ON TORSIONAL VIBRATION[J];振动与冲击;2005-04
9 Xiong Shibo Wang Ranfeng Liang Yiwei Ma Weijin Xiong Xiaoyan (Mechano-Electronic Engineering Institute, Taiyuan University of Technology, Taiyuan 030024);SELF-EXCITED VIBRATION DIAGNOSIS OF THE ROLLING MILLS AND STRUCTURE DYNAMICS MODIFICATION[J];机械工程学报;2005-07
10 Li Lin Sheng Jun(Beijing University of Aeronautics and Astronautics, 100083, Beijing, China);Mixed Interface Direct Component Modal Synthesis Method[J];应用力学学报;2005-02
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved