Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Journal of Vibration and Shock》 2015-22
Add to Favorite Get Latest Update

Compensation control of oil thickness fluctuation in hydrostatic guide system of precision NC machine

HU Jun-ping;HU Qian;LI Ke-jun;LIU Cheng-pei;XU Da-qing;College of Mechanical and Electrical Engineering,Central South University;Development Depatment of Changde Electric Power Bureau,State Grid Corporation of China;  
In view of the oil film thickness fluctuation in hydrostatic guide under dynamic load in mechanical processing,a state-space model of closed hydrostatic guide system was established. Considering the foreseeable characteristics of processing load in precision NC machine tool,an active preview control strategy for the oil cavity pressure was presented. By means of MATLAB software,a simulation model for the compensation control system was built. The fluctuation of oil film thickness was investigated under the conditions of no control,optimal control and active preview control. The variation of the oil cavity pressure under the optimal and active control was observed. The simulation results show that the oil film fluctuation under active preview control reduces by 73. 3% compared to the case of optimal control,and reduces by 94. 1% compared to the case of no control. Besides,the following performance of the cavity oil pressure on the processing load is improved by 23%. Finally,an experiment evaluating the deviation of the slider was carried out. The experiment results correspond to those of the simulation computation.
【Fund】: 国家自然科学基金(51175518)
【CateGory Index】: TG659
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【Citations】
Chinese Journal Full-text Database 8 Hits
1 Meng Xinzhai 1,Meng Zhaoyan 2 (1. Henan University of Science and Technology, Luoyang, Henan 471003, China; 2. Luoyang Shuixing Co., Luoyang, Henan 471003, China);Analysis and Study of New Type Hydrostatic Bearing Restrictor With Very Good Restrictive Performance[J];Engineering Science;2005-03
2 SHAO Jun-peng,ZHANG Xiao-tong(Harbin University of Science & Technology,Harbin 150080,China);Control Schemes of Oil Film Thickness for Hydrostatic Slide[J];Energy Conservation Technology;2006-06
3 GAO Dianrong ZHAO Jianhua ZHANG Zuochao ZHENG Dan(College of Mechanical Engineering,Yanshan University,Qinhuangdao 066004);Research on the Influence of PM Controller Parameters on the Performance of Hydrostatic Slide for NC Machine Tool[J];Journal of Mechanical Engineering;2011-18
4 LIU Ri-liang,LI Peng,ZHANG Cheng-rui,ZHAO Xiao-feng(School of Mechanical Engineering,Shandong University,Jinan 250061,China);Key technologies for NC machining service oriented to cloud manufacturing[J];Computer Integrated Manufacturing Systems;2012-07
5 XU Yu-jie~a,b),UAO Fu-cheng~b a.School of Automation Engineering,b.School of Mathematics and Physics,University of Science and Technology Beijing,Beijing 100083,China.;Preview control for a class of time-varying discrete systems with input time-delay[J];Control and Decision;2013-03
6 YUAN Lingling;MEI Wentao;Tianjin Bohai Vocational Technical Colleague;;MATLAB-based Simulation of the Influence of High Speed Milling Forces on Machining Parameters:Analyses and System Realization[J];Tianjin Science & Technology;2014-02
7 DU Zhiqiang(China Machine Tool & Tool Builders′ Association, Beijing 100055, CHN);The application analysis of high precision static pressure guide[J];Manufacturing Technology & Machine Tool;2012-05
8 YUAN De-hu1,2,JIN Hui-liang1,MENG Guo-xiang1 1. School of Mechanical Engineering,Shanghai Jiao Tong University,Shanghai 200240,China; 2. Research and Development Center,Shanghai Aerospace Control Engineering Institute,Shanghai 200233,China;Nonlinear optimal control for robotic yoyo playing[J];中南大学学报(英文版);2011-02
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 YE Hong-ling,ZHENG Xiao-long,SHEN Jing-xian,LIU Zhao-miao(Engineering Numerical Simulation Center,College of Mechanical Engineering and Applying Electronic Technique, Beijing University of Technology,Beijing 100124,China);DYNAMIC MODELING AND ANALYSIS OF AXIAL VIBRATION OF THE HYDROSTATIC SLIDE TURNTABLE[J];Engineering Mechanics;2012-03
2 YE Hong-ling,WEI Xu-hao,ZHENG Xiao-long,LIU Zhao-miao(College of Mechanical Engineering and Applied Electronics Technology,Beijing University of Technology,Beijing 100124,China);Modal Analysis and Parameters' Influences of Hydrostatic Oil Film-turntable System[J];Journal of Beijing University of Technology;2012-07
3 GAO Dian-rong,ZHAO Jian-hua,ZHANG Zuo-chao(Mechanical Engineering College of Yanshan University,Qinhuangdao,Hebei 066004,China);ANALYSIS OF NUMBER OF OIL-POCKETS IN ONE SLIDE SURFACE OF LIQUID HYDROSTATIC SLIDE[J];Engineering Mechanics;2013-04
4 WANG Fei;YU Quanyu;TANG Cao;HU Jian;TAN Yinwu;CHEN Mingxin;College of Mechanical and Automotive Engineering,Anhui Polytechnic University;;Design and analysis on the flow control system of lathe hydrostatic slide[J];Journal of Chongqing University of Arts and Sciences(Social Sciences Edition);2015-02
5 LI Li;LIAO Fu-cheng;School of Mathematics and Physics,University of Science and Technology Beijing;;H_∞ optimal preview control with robust tracking performance[J];Chinese Journal of Engineering;2015-10
6 TANG Jian(Chongqin Industry Polytechnic College,Chongqing 400050,China);Study on Load Characteristic for Hydrostatic Bearing with Different Throttle Methods[J];Machine Tool & Hydraulics;2010-12
7 LV Lin,DENG Ming, LI Yan-xia,WANG Zheng-li(Chongqing University of Technology,Material Science and Engineering College,Chongqing 400050,China);The Stiffness Design and Control of Oil Film of Fine-blanking Machine's Hydrostatic Guide Rail[J];Journal of Netshape Forming Engineering;2010-05
8 YE Hong-ling~*,WEI Xu-hao,Zheng Xiao-long,LIU Zhao-miao (School Mechanical Engineering and Applied Electronics,Beijing University of Technology,Beijing 100124,China);Multi-objective parameter optimization design of hydrostatic supporting system using ideal point method[J];Chinese Journal of Computational Mechanics;2011-S1
9 GUO Hong1,2,LAI Xin-min1,CEN Shao-qi2(1.School of Mechanical Engineering,Shanghai Jiaotong University,Shanghai 200030,China;2.School of Mechanical Engineering,Zhengzhou University,Zhengzhou 450001,China);Characteristics research on new typed radial hydrostatic bearing with round stepped pin throttling[J];Journal of Machine Design;2009-09
10 GAO Dianrong ZHAO Jianhua ZHANG Zuochao ZHENG Dan(College of Mechanical Engineering,Yanshan University,Qinhuangdao 066004);Research on the Influence of PM Controller Parameters on the Performance of Hydrostatic Slide for NC Machine Tool[J];Journal of Mechanical Engineering;2011-18
China Proceedings of conference Full-text Database 3 Hits
1 YE Hong-ling,WEI Xu-hao,LIU Zhao-miao(College of Mechanical Engineering and Applied Electronics,Beijing University of Technology,Beijing 100124,China);Multi-objective parameter optimization design of hydrostatic supporting system using ideal point method[A];[C];2010
2 Lv lin,Deng Ming,Li Yan xia,Wang Zheng li Chongqing University of Technology,Material science and engineering college,Chongqing 400050;The design of fine-blanking machine's hydrostatic guide stiffness and oil film control[A];[C];2010
3 Guo Hong~(1 2) Li Ruizhen~2 Cen Shaoqi~2 1 School of Mechanical Engineering,Shanghai Jiaotong University,Shanghai 200030,China 2 School of Mechanical Engineering,Zhengzhou University,Zhengzhou Henan 450001,China;The Characteristics Study of Hydrostatic Bearings with New Structure Inner Pin Throttle[A];[C];2007
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 LIAO Fu-cheng1),XU Yu-jie1,2) 1) School of Mathematics and Physics,University of Science and Technology Beijing,Beijing 100083,China 2) School of Automation Engineering,University of Science and Technology Beijing,Beijing 100083,China;Design of an optimal preview controller for time-varying discrete-time systems with state time-delay[J];Journal of University of Science and Technology Beijing;2012-02
2 ZHU You-hong,LIU Jian-ting,YANG Jian-xi,BAI Kai(Electromechanic Engineering College,Henan University of Science & Technology,Luoyang 471003,China);Design Analysis on New Thin Film Restrictor of Liquid Hydrostatic Bearing[J];Bearing;2008-03
3 Meng Xinzhai 1, Yang Jianxi 1, Meng Zhaoyan 2 (1. Dep. of Mech & Eng, Luoyang Inst. of Technol., Luoyang, Henan 471039, China; (2. Luoyang Mercury Co.,Luoyang,Henan 471039,China)[;New Formulas for the Static Characteristic of Hydrostatic Bearing and Their Application[J];Engineering Science;2002-05
4 Meng Xinzhai 1 , Yang Jianxi 1, Meng Zhaoyan 2 (1. Henan University of Science and Technology, Luoyang, Henan 471039, China; 2. Luoyang Shuixing Co., Luoyang, Henan 471039, China)[;New Formulas of Dynamic Characteristic of Hydrostatic Bearing and Its Testified Experiment[J];Engineering Science;2003-03
5 Meng Xinzhai 1,Meng Zhaoyan 2 (1. Henan University of Science and Technology, Luoyang, Henan 471003, China; 2. Luoyang Shuixing Co., Luoyang, Henan 471003, China);Analysis and Study of New Type Hydrostatic Bearing Restrictor With Very Good Restrictive Performance[J];Engineering Science;2005-03
6 ZHOU Xiang-bing(Department of Computer Science,Aba Teachers College,Chengdu,Sichuan,611741,China);A Survey on Ontology Application Research[J];Journal of Guangxi Academy of Sciences;2010-04
7 Cao Junpeng,Yang Hui (China Precision Engineering Institute for Aircraft Industry,Beijing 100076);Research on Hydrostatic Slider and Its Driving System[J];Aviation Precision Manufacturing Technology;2002-03
8 SHAO Jun-peng,ZHANG Xiao-tong(Harbin University of Science & Technology,Harbin 150080,China);Control Schemes of Oil Film Thickness for Hydrostatic Slide[J];Energy Conservation Technology;2006-06
9 LI Bo-hu1,2,ZHANG Lin1,WANG Shi-long3,TAO Fei1,CAO Jun-wei4,JIANG Xiao-dan5,SONG Xiao1,CHAI Xu-dong2(1.Engineering Research Center of Advanced Manufacturing System of Complex Product,Ministry of Education,Beihang University,Beijing 100191,China;2.Beijing Simulation Center,Beijing 100854,China;3.College of Mechanical Engineering,Chonqing University,Chongqing 400044,China;4.Research Institute of Information Technology,Tsinghua University,Beijing 100084,China;5.Smartdot Technologies Co.,Ltd.,Beijing 100083,China);Cloud manufacturing:a new service-oriented networked manufacturing model[J];Computer Integrated Manufacturing Systems;2010-01
10 ZHANG Lin,LUO Yong-liang,TAO Fei,REN Lei,GUO Hua(Engineering Research Center of Complex Product Advanced Manufacturing System,Ministry of Education,Beihang University,Beijing 100191,China);Key technologies for the construction of manufacturing cloud[J];Computer Integrated Manufacturing Systems;2010-11
China Proceedings of conference Full-text Database 1 Hits
1 Guo Hong~(1 2) Li Ruizhen~2 Cen Shaoqi~2 1 School of Mechanical Engineering,Shanghai Jiaotong University,Shanghai 200030,China 2 School of Mechanical Engineering,Zhengzhou University,Zhengzhou Henan 450001,China;The Characteristics Study of Hydrostatic Bearings with New Structure Inner Pin Throttle[A];[C];2007
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved