Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Journal of Zhejiang University(Engineering Science)》 2001-01
Add to Favorite Get Latest Update

Joining of Si_3N_4 and Cu using liquid diffusive reaction of Ti/Cu

ZHOU Fei 1, LI Zhi-zhang 1, LUO Qi-fu\+2\;(1. Dept. of Materials Science & Engineering, Zhejiang Uni., Hangzhou 310027,China; 2. College of Materials Science & Engineering,Jiangsu Uni. of Science & Technology, Zhenjiang 212013, China)  
Joining of Si\-3N\-4 and Cu was performed at 1 273K with Ti powder as intermediate.The effect of bonding conditions and interfacial reaction on the joint strength was discussed.The joint strength for different holding time was measured by four-point bending tests and the interfacial microstructures were observed and analyzed using SEM, EPMA and XRD respectively.It was shown that Cu-Ti liquid alloy formed on the surface of Si\-3N\-4 and reacted with Si\-3N\-4 on the interface at the temperature of 1 273 K,which resulted in formation of the bonding interface of Si\-3N\-4/TiN/Ti\-5Si\-3+Ti\-5Si\-4/Cu\-3Ti\-2/Cu.The joint strength increased with the increase of holding time at \{1 273 K\},however,when the holding time was longer than 25min,the further increase of holding time caused the decrease of joint strength.According to the microstructural analyses,the bonding strength was considered to be determined by the interface reaction and thermal stress at interface.
【CateGory Index】: TG457
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【Citations】
Chinese Journal Full-text Database 3 Hits
1 Associate Professor Bao Fanghan Professor Ren Jialie Lecturer Zhou Yunhong (Tsinghua University);PROPERTIES OF VACUUM BRAZED Si_3N_4/STEEL JOINT USING ACTIVE BRAZING FILLER METAL[J];Transactions of The China Welding Institution;1990-04
2 XU Leying;WANG Wenbin;ZHUANG Yuzhi Institute of Metal Research, Academia Sinica, Shenyang;DIFFUSION REACTIONS BETWEEN Cu AND NbTi[J];Acta Metallurgica Sinica;1988-04
3 ZHOU Fei (Department of Materials Science, Jiangsu University of Science & Technology, Zhenjiang 212013) LI Zhizhang (Department of Materials Science, Zhejiang Universitys Hangzhou 310027) Correspondent: ZHOU Fei, Tel: (0511)8791332, E-mail: zhoufei@jsust;STUDIES ON THE PARTIAL TRANSIENT LIQUID PHASE BONDING OF SILICON NITRIDE WITH ACTIVE METAL[J];ACTA METALLRUGICA SINICA;2000-02
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 Zhang Jianjun1, Li Shujie1, Duan Huiping1, Liu Yong 1, Zhang Yan2 (1. School of Materials Science and Engineering, Beijing University of Aeronautics and Astronautics,Beijing 100083,China) (2. State Key Laboratory for Advanced Metals and Materials, University of Science and Technology Beijing ,Beijing 100083,China);Effects of Technological Parameters on the Joining Strength of SiC Ceramic by Hot Pressing Reaction Welding[J];Rare Metal Materials and Engineering;2003-07
2 Li Shujie 1) Zhang Li 2) 1)(School of Materials Science & Engineering, BeiHang University, Beijing 100083) 2)(Department of Architecture Civil Engineering, North China Institute of Science and Technology, Yanjiao 101601);Joining SiC-based materials to themselves and metals[J];Powder Metallurgy Technology;2004-02
3 Chen Dengquan(Kunming Institute of Precious Metals,Kunming 650221, China);Progress of Filler Metals and Brazing Processes for Ceramic to Metal Brazing[J];Precious Metals;2001-01
4 Zhang Jianjun, Li Shujie (Department of Materials Science and Engineering, Division 101, Beijing University of Aeronautics and Astronautics, Beijing 100083);PROGRESSES OF JOINING TECHNIQUES OF NONOXIDE CERAMICS[J];Journal of The Chinese Ceramic Society;2002-01
5 YANG Min,ZOU Zeng-da,LIU Xiu-zhong,WANG Yu-fu,CUI Feng-you(School of Material Science and Engineering,Shandong University,Jinan 250061,China).;Strength and fracture behavior of Si_3N_4 ceramic/Inconel 600 alloy liquid phase inductive diffusion bonding joint[J];Transactions of The China Welding Institution;2003-04
6 WANG Yan-fang (1. Department of Materials Science and Engineering, Shaanxi Polytechnic Institute, Xianyang 712000 2. College of Material, Northwestern Polytechnical University, Xi'an 710072);Research on the Liquid Growth Mode of Ti/Cu[J];Aviation Precision Manufacturing Technology;2009-01
7 WANG Yan-fang (Department of Materials Science and Engineering,Shaanxi Polytechnic Institute,Xianyang 712000);Research on Composition of Ti/Cu Interface[J];Aviation Precision Manufacturing Technology;2010-03
8 WANG Yan-fang(1.Department of Materials Science and Engineering,Shaanxi Polytechnic Institute,Xianyang 7120002.College of Material,Northwestern Polytechnical University,Xi'an 710072);Research on Isothermal Solidification Process of Ti/Cu Contact Liquid Layer[J];Aviation Precision Manufacturing Technology;2011-01
9 XIONG Huaping; WAN Chuangeng; ZHOU Zhendng( Department of Materials Science and Engineering, Jinlin University of Technology, Changchun 130025 Welding Division, Beijing institute of Aeronautical Materials, Beijing 100095orrespondent: XIONG Heaping ) assoc;WETTING AND JOINING BETWEEN Si_3N_4 CERAMIC AND Cu-Ni-Ti ALLOY BRAZING FILLER[J];ACTA METALLRUGICA SINICA;1999-05
10 ZHOU Fei (Department of Materials Science, Jiangsu University of Science & Technology, Zhenjiang 212013) LI Zhizhang (Department of Materials Science, Zhejiang Universitys Hangzhou 310027) Correspondent: ZHOU Fei, Tel: (0511)8791332, E-mail: zhoufei@jsust;STUDIES ON THE PARTIAL TRANSIENT LIQUID PHASE BONDING OF SILICON NITRIDE WITH ACTIVE METAL[J];ACTA METALLRUGICA SINICA;2000-02
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 YAO Hai-yu,WANG Yin-zhen,WANG Hai-fang,WANG Wei(College of Mechanical and Electronic Engineering,University of Petroleum,Dongying 257061,China);Sliding wear properties of reactive high velocity oxy-fuel flame spraying TiC-Ni coatings[J];Ordnance Material Science and Engineering;2006-02
2 CAI Yan-bing, WANG Zhi-hong, ZHANG Guo-zhen, NIE Zuo-ren ( College of Materials Science and Engineering, Beijing University of Technology, Beijing 100022, China );Research on the Densification of Al_2O_3-TiC Composites by Spark Plasma Sintering (SPS)[J];Journal of Beijing Polytechnic University;2003-01
3 Mao Yangwu (School of Materials Science and Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100083, China) Zhang Jianjun (Department of Mechanical Engineering, Beijing Institute of Petrochemical Technology, Beijing 102617, China) Li Shujie (School of Materials Science and Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100083, China);Analysis of the residual thermal stresses of SiC joint with Ti/Ag/Ti interlayer by FEM[J];Journal of Beijing University of Aeronautics and Astronautics;2004-10
4 Tao Feng1), Xizhang Chen1,2), Luhai Wu1), and Songnian Lou1) 1) School of Material Science and Engineering, Shanghai Jiaotong University, Shanghai 200030, China 2) School of Material Science and Engineering, Jiangsu University, Zhenjiang 212013, China;Diffusion welding of SiCp/2014Al composites using Ni as interlayer[J];北京科技大学学报(英文版);2006-03
5 Chu Jianxin Lin Chenguang Ye Jun(Beijing General Research Institute for Non-Ferrous Metals,Beijing 100088,P. R. China);Research and trend of active brazer for ceramic-metal joining[J];Materials Review;1994-01
6 ;Research Progress of Al_2O_3-TiC Composite Ceramic[J];Materials Review;1995-01
7 ZHANG Yong1,ZHANG Guo-qing1,HE Zhi-yong2,FENG Di2,LI Zhou1 (1 National Key Laboratory of Advanced High Temperature Structural Materials,Beijing Institute of Aeronautical Materials,Beijing 100095,China;2 Central Iron & Steel Research Institute,Beijing 100081,China);Wettability Research of Nickel-based High Temperature Filler Metal on C_f/SiC Ceramic Matrix Composite[J];Journal of Materials Engineering;2008-03
8 LI Xiao-yi,LUO Zhen,BU Xian-zheng,AO San-san,YUAN Shu-xian,SONG Kai-lei,XUE Zhi-qing(School of Materials Science and Engeering,Tianjin University,Tianjin 300072,China);Study on Active Brazing of Al_2O_3 Ceramic and Ni[J];Journal of Materials Engineering;2008-09
9 Wang Muzhen Xu Zhaicheng Du Xingchun Pan Longxiu (Harbin Institute of technology);An Experiment Study of Welding SiCw/6061Al Composites by Using Laser Beam[J];;1991-04
10 Tang Winming; Lu Jun; Ding Houfu; Zheng Zhixiang(Hefei University of Technology );Study on Al_2O_3 Matrix Ceramics Sintered at Low Temperature[J];MATERIAL SCIENCE AND TECHNOLOGY;1997-03
【Secondary Citations】
Chinese Journal Full-text Database 3 Hits
1 Chen Zheng Zhao Qizhang Lou Hongqing (East China Shipbuilding Institute)Zhou Fei Li Zhizhang (Zhejiang University)[BHDWG3,WKW]Luo Qifu (Jiangsu University of Science and Technology);PARTIAL TRANSIENT LIQUID-PHASE BONDING OF Si 3N 4 WITH Ti/Ni/Ti MULTI_INTERLAYER[J];JOURNAL OF THE CHINESE CERAMIC SOCIETY;1998-01
2 Associate Professor Bao Fanghan Professor Ren Jialie Lecturer Zhou Yunhong (Tsinghua University);PROPERTIES OF VACUUM BRAZED Si_3N_4/STEEL JOINT USING ACTIVE BRAZING FILLER METAL[J];Transactions of The China Welding Institution;1990-04
3 XU Leying;WANG Wenbin;ZHUANG Yuzhi Institute of Metal Research, Academia Sinica, Shenyang;DIFFUSION REACTIONS BETWEEN Cu AND NbTi[J];Acta Metallurgica Sinica;1988-04
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved