Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Journal of Zhejiang University(Engineering Science)》 2004-01
Add to Favorite Get Latest Update

Modular design method for control of reconfigurable machine tools

XU Hong,TANG Ren-zhong,CHENG Yao-dong(Institute of Modern Manufacturing Engineering,Zhejiang University, Hangzhou 310027,China)  
A design method for constructing a hierarchical structure controller with control modules was proposed for synchronously reconfiguring the control and machine of reconfigurable machine tool(RMT). In this method,the entire controller and its individual control module at every level acted as a set consisting of a finite state machine (FSM) with input output event set pairs. Each pair of input output event set was defined as a port of the control module, and the input event set on a given port formed the port-acceptable language. Thus, when the mechanical modules are assembled, the control modules can be connected using port language, which constructs the higher control module until the entire controller is connected. Thereby, the control and machine reconfiguration of RMTs occurs synchronously. Based on the introduction of FSM expression for discrete event systems, the definitions of control module with FSM, module combination, as well as the design and construction theory of modular controller was given. Using this theory, once the control modules are properly designed and connected, the resulting controller is guaranteed to be controllable.
【Fund】: 浙江省自然科学基金资助项目(598042).
【CateGory Index】: TG66
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 7 Hits
1 ZHU Chun-geng1,YANG Yu-tu2,XU Hong1,LU Zhang-ping~3(1.College of Communications,Zhejiang Normal University,Jinhua 321019,China;2.College of Mechanical Engineering,Nanjing Forestry University,Nanjing 210037,China;3.College of Mechanical Engineering,Jiangsu University,Zhenjiang 212013,China);Virtual refitting design of welding equipment for steel cylinder[J];Journal of Engineering Design;2008-01
2 WU Bao-zhong,GONG Jing-zhong,LI Guo-xi,GUO Mi-na (College of Mechatronics Engineering and Automation,National Univ.of Defense Technology,Changsha 410073,China);Manufacturing Equipment Reconfiguration Facing to Process Capability[J];Journal of National University of Defense Technology;2007-01
3 ZHU Chun-geng1,YANG Yu-tu2,JIANG Hong-kui1,LU Zhang-ping3(1.Zhejiang Normal University,Jinhua 321019;2.Nanjing Forestry University,Nanjing 210037;3.Jiangshu University,Zhenjiang 212013,China);Virtual Design and Refitting of the Steel Cylinder Welding Equipment[J];Computer Engineering & Science;2007-07
4 BAI Jing,QIN Xian-sheng,ZHANG Shun-qi,TAN Xiao-qun(School of Mechatronics,Northwestern Polytechnical University,Xi'an 710072,China);Product configuration design based on module extension[J];Computer Integrated Manufacturing Systems;2009-11
5 GAO Jianguo (Changzhou Institute of Mechatronic Technology,Jiangsu,Changzhou,213164,P.R.China);Study on Control System of Reconfigurable Spiral and Socket Machine Tools[J];Modern Manufacturing Technology and Equipment;2010-06
6 YAO Xin-hua~1,PAN Xue-zeng~1,FU Jian-zhong~2,CHEN Zi-chen~2(1.Department of Computer Science and Engineering,Zhejiang University,Hangzhou 310027,China;2.Institute of Advanced Manufacturing Engineering,Zhejiang University,Hangzhou 310027,China);Research on real-time FSM modeling for microfabrication NC system[J];Journal of Zhejiang University(Engineering Science);2005-12
7 LI Lin(Fujian Communication Technology College,Fuzhou 350007,China);Research on and Development of CNC System software Based on Real Time Linux[J];Machine Building & Automation;2010-05
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 LI Feng-gang, NI Zhi-wei, HUANG Ling(School of Management, Hefei University of Technology, Hefei 230009,China);Research on reconfigurable manufacturing systems based on case-based reasoning[J];Journal of Anhui Institute of Architecture;2005-04
2 MA Lian chuan, LIU Bo (College of Electronics and Information Engineering, Northern Jiaotong University, Beijing 100044,China);Implementation of a Distributed Triple-Modular Redundancy Control System[J];JOURNAL OF NORTHERN JIAOTONG UNIVERSITY;2000-05
3 Wang Shaoping\ Tao Jianfeng\ Jiao Zongxia(School of Automation Science and Electrical Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100083, China);Error analysis based on hierarchical availability analysis[J];Journal of Beijing University of Aeronautics and Astronautics;2004-09
4 LI Liying, YANG Peng Civil and Environmental Engineering School, University of Science and Technology Beijing, Beijing 100083, China;Application of entropy coefficient to evaluation of overall benefit in coal enterprises[J];Journal of University of Science and Technology Beijing;2005-03
5 MENG Han feng, CAI Ying, XUE Qing, LING Zhi yun (School of Mechanical Engineering and Automation, Beijing Institute of Technology, Beijing100081, China);Product Data Management Based on Quick Reconfiguration of Manufacturing Resources[J];Journal of Beijing Institute of Technology;2001-03
6 CHEN Han ming, XUE Qing, CAI Ying, FANG Jin tao (School of Mechanical Engineering and Automation, Beijing Institute of Technology, Beijing100081, China);A Study on Automatic and Intelligent Numerical Control Programming Running Under Product Data Management[J];Journal of Beijing Institute of Technology;2002-04
7 SUN Liansheng, NING Ruxin(School of Mechanical Engineering and Automation, Beijing Institute of Technology, Beijing100081, China);A Study on Production Line Planning Based on Reconfigurable Cells[J];Journal of Beijing Institute of Technology;2002-06
8 ZONG Mingdi,CAI Ying,LIU Xudong,LI Xiangyuan (School of Mechanical and Vehicular Engineering, Beijing Institute of Technology, Beijing100081, China);A Multi-Perspective Hierarchical Division Approach for a Product in Its Modular Design[J];Journal of Beijing Institute of Technology;2003-05
9 LING Wei-xin 1, ZHENG Qi-lun 2, CHEN Qiong 2, LU Cui-ying 1 (1. Dept. of Applied Mathematics, South China Univ. of Tech., Guangzhou 510640, China; 2. Dept. of Computer Engineering and Science, South China Univ. of Tech., Guangzhou 510640, China);A Modular Neural Network Architecture Based on Parallel Cooperation[J];Journal of Beijing University of Posts and Telecommunications;2002-02
10 DENG Fu-min(School of MBA,Sichuan University,Chengdu,Sichuan,610064);The Model of Capital Time-Value Based on Dynamic Interest Rate[J];Journal of Xihua University(Philosophy & Social Sciences);2006-03
【Secondary References】
Chinese Journal Full-text Database 10 Hits
1 Wan Jia-fu Li Di Ye Feng Lai Yi-zong(Institute of Opto-Mechatronics,South China University of Technology,Guangzhou 510640,Guangdong,China);Two-Level Hierarchical Scheduling Scheme of Hybrid Real-Time Tasks[J];Journal of South China University of Technology(Natural Science Edition);2008-04
2 Li Di Wan Jia-fu Ye Feng Lai Yi-zong(Institute of Opto-Mechatronics,South China University of Technology,Guangzhou 510640,Guangdong,China);Effect of Time Characteristics of Software NC Real-Time Tasks on Manufacturing Accuracy[J];Journal of South China University of Technology(Natural Science Edition);2009-02
3 WU Nan1,2,3,FANG Li-jin1,JIANG Chun-ying1,2,ZHANG Fei1,2(1.Robotics Laboratory,Shenyang Institute of Automation,Chinese Academy of Sciences,Shenyang 110016,China;2.Graduate School of the Chinese Academy of Sciences,Beijing 100049,China;3.College of Computer Science,Qufu Normal University,Qufu 273165,China);Control System Design of a Space Docking Simulation Platform Based on Finite State Machine[J];Robot;2007-04
4 WANG Tai-yong,LI Bo,WAN Shu-min,LI Hong-wei(Sch.of Mech.Eng.,Tianjin Univ.,Tianjin\ 300072,China);Reconfigurable CNC system based on fieldbus[J];Computer Integrated Manufacturing Systems;2006-10
5 WAN Jia-fu1,2,LI Di1,YE Feng1,LAI Yi-zong1(1.College of Mechanical Engineering,South China University of Technology,Guangzhou 510640,China;2.Department of Computer,Guangdong College of Mechanical&Electrical Technology,Guangzhou 510515,China);Hybrid task scheduling algorithm oriented to software computer numerical control system[J];Computer Integrated Manufacturing Systems;2009-03
6 LI Di~1 WAN Jiafu~(1,2) YE Feng~1 LAI Yizong~1 1.College of Mechanical Engineering,South China University of Technology,Guangzhou 510640 2.Department of Computer,Guangdong College of Mechanical and Electrical Technology,;Two-level Hierarchical Scheduling Scheme of Hybrid Tasks for Software CNC System[J];Chinese Journal of Mechanical Engineering;2008-12
7 Zhao Li Wang Taiyong Hu Shiguang(School of Mechanical Engineering,Tianjin University,Tianjin 300072,China);Simulation of CNC System Dynamic Performance Based on Net Theory[J];Transactions of the Chinese Society for Agricultural Machinery;2009-03
8 LUO Guo-fu,WEN Xiao-long(College of Mechanical and Electrical Engineering,Zhengzhou University of Light Industry,Zhengzhou 450002,China);Algorithm Research and Software Realization of Dynamic Balancing Machine[J];Coal Mine Machinery;2009-12
9 AN Li-xin,LAN Xiang-yang(College of Information Engineering,China Jiliang University,Hangzhou 310018,China);Data structure designed for finite automata computation[J];Journal of China Jiliang University;2007-02
10 GAO Zhen-yua,WU Er-yongb,YANG Shi-xia(a.College of Mechanical and Energy Engineering;b.College of info Science and Enigneering,Zhengjiang University,Hangzhou 310027,China);The Design of Dynamic Balancing Machine Based on Finite Element Analysis[J];Modular Machine Tool & Automatic Manufacturing Technique;2007-09
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved