Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Journal of Zhejiang University(Engineering Science)》 2010-01
Add to Favorite Get Latest Update

Large surface fitting and trimming techniques for N-sided regions filling

XU Jin 1,2 ,KE Ying-lin1(1.Department of Mechanical Engineering,Zhejiang University,Hangzhou 310027,China;2.School of Mechanical and Automotive Engineering,Zhejiang University of Science and Technology,Hangzhou 310023,China)  
A new method based on large surface fitting and topology recovery techniques was proposed to deal with the problem of N-sided regions filling in reverse engineering,which appears occasionally in the reconstruction of complex CAD models.Curves were constructed on the surrounding surfaces of the N-sided region,and subsequently the surrounding surfaces were trimmed to obtain a large quadrilateral region which including the N-sided region.Then,all the surrounding surfaces were evenly sampled and a B-spline surface was constructed,by interpolating the discrete boundary constraints and approximating all the points in the quadrilateral region.Finally,the B-spline surface was trimmed and all the surrounding surfaces were refitted subjected to the constraints of points sampled from the B-spline surface.The final model is approximate G1 continuous in global sense,and it keeps the same topology as the original model.
【Fund】: 国家自然科学基金资助项目(50575098)
【CateGory Index】: TP391.7
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【Citations】
Chinese Journal Full-text Database 1 Hits
1 Jia Ming Lu Zhen Li Yongqing Ke Yinglin (Zhejiang University);LOCAL COINCIDED DESIGN BASED ON TRIMMED B-SPLINE SURFACES[J];机械工程学报;2003-02
【Co-citations】
Chinese Journal Full-text Database 5 Hits
1 BIAN Keke LI Jiangxiong KE Yinglin (State Key Laboratory of Fluid Power Transmission and Control, Zhejiang University, Hangzhou 310027);Topology Recovery Technique for Complex Freeform Surface Model Based on Local Consistent Mending[J];机械工程学报;2009-07
2 BIAN Ke-ke,WANG Qing,LI Jiang-xiong,KE Ying-lin(State Key Laboratory of Fluid Power Transmission and Control,Zhejiang University,Hangzhou 310027,China);Local consistent mending technique for complex freeform surface model[J];浙江大学学报(工学版);2009-06
3 FAN Shuqian~(1,2) SHI Mingquan~1 KE Yinglin~2 LI Jiangxiong~2 1.School of Mechatronic Engineering,University of Electronic Science and Technology of China,Chengdu 610054; 2.College of Mechanical & Energy Engineering,Zhejiang University,Hangzhou 310027;Local Beautification Technique for Freeform Surfaces[J];机械工程学报;2008-12
4 LIU Tao,CHEN Bang-dao,SU Jia-qiang(College of Mechanical Engineering,Guangxi University,Nanning 530004,China);Research on Reverse Engineering Technology[J];装备制造技术;2006-04
5 Ke Yinglin Fan Shuqian (College of Mechanical & Energy Engineering, Zhejiang University, Hangzhou 310027);Local Consistent Mending Technique for Complex Surfaces[J];计算机辅助设计与图形学学报;2005-03
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved