Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《China Mechanical Engineering(中国机械工程)》 2006-13
Add to Favorite Get Latest Update

Principle and Experimental Research of Three Dimensional Printing

Li Xiaoyan~(1,2)Wu Yonghui~(1)Zhang Shu~(1)1.Tongji University,Shanghai,200092 2.University of Shanghai for Science and Technology,Shanghai,200093  
Experiments of three dimensional printing were carried out on gypsum based compound powders.The principle of three dimensional printing was discussed,and the micro structure,mechanical properties and three dimensions'accuracy of the three dimensional printing products were measured;meanwhile,the influence of process parameters on the products' micro structures and macro properties were analyzed.Reasonable process parameters of three dimensional printing were suggested according to the results of the experiments and proved by real applications.
【CateGory Index】: TH16
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 4 Hits
1 NIE Jian-hua;LI Zhou-xiang;LIN Yue-hua;Zhongshan Vocational and Technical College;Zhongshan Hanke Fine Chemical Co.,Ltd.;;Research on High-performance Rapid Prototyping Powder and Adhesive Solution for Three Dimensional Printing Using SLS Technology[J];塑料工业;2014-02
2 NIE Jian-hua;ZHOU Zhi-sheng;HUO Ze-rong;ZHAO Ning;Zhongshan polytechnic;Zhongshan Dayi Coating Co.,Ltd.;Shenzhen Vocational and Technical College;;Research on Polyamide Resin as Prototyping Powder and Binder Solution for Elastic Products via 3D Printing[J];塑料工业;2014-01
3 Fu Liu;Li Shujuan;Hu Chao;School of Machinery and Precision Instrument Engineering,Xi'an University of Technology;;Effect of the 3DP Printing Parameters on the Material Contraction Ratio Based on the RSM Method[J];机械科学与技术;2013-12
4 LI Shujuan,CAO Shan,FU Liu (School of Mechanical & Instrumental Engineering,Xi′an University of Technology,Xi′an 710048,China);A method for precision forming and parameters calibration of three dimensional parts[J];兵器材料科学与工程;2013-03
【Citations】
Chinese Journal Full-text Database 4 Hits
1 LI Xiao-yan~(1,2),ZHANG Shu~1(1.Institute of Contemporary Manufacturing Technology,Tongji University,Shanghai 200092,China;2.Shanghai University of Science and Engineering,China);Development on forming system of 3D printing[J];机械设计;2005-11
2 Li Xiaoyan~(1,2),Zhang Shu~1(1.Tongji University,Shanghai 200092,China;2.University of Shanghai for Science and Technology,Shanghai 200093,China);Three Dimensional Printing of Rapid Prototyping and its Experimental Research[J];电加工与模具;2005-05
3 GAO Chen, HUANG Sun-Xiang, CHEN Lei, LIU Chi-Hui, LIU Xiao-Nan, BAO Jun (National Synchrotron Radiation Lab, University of Science and Technology of China, Hefei 230029, China; Department of Physics, University of Science and Technology of China, Hefei 230026, China);Progress in InkJet Technique and Its Applications[J];无机材料学报;2004-04
4 MOU Guodong (Department of Material Engineering, Xi'an University of Science and Technology, Xi′an 710054);A STUDY ON THE PHASE-TRANSFORMATION OF THE BASSANITES DURING HYDRATION[J];硅酸盐学报;2002-04
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 LIU Juan-hong;MA Yi;WANG Zu-qi;GAO Meng;ZHOU Qian;School of Civil and Environmental Engineering,University of Science and Technology Beijing;;Impact of gypsum type on the setting and hardening performance and mechanism of water-rich filling materials[J];工程科学学报;2015-12
2 WANG Kuang-fei;ZHANG Jin-zhi;L San-lei;ZHOU Zhi-jie;School of Materials Science and Engineering, Henan Polytechnic University;Henan Pingyuan Optics Electronics Co., Ltd.;;Experiment Research of Gypsum Mold Vacuum Pouring for ZM5 Magnesium Alloy[J];铸造;2015-10
3 LI Dao-long;ZHANG Chao;QIAN Cheng;College of Electrical and Information Engineering, Anhui University of Science and Technology;;Design of 3Dprinter Based on STM32[J];科技视界;2015-28
4 JIN Jiaqi;SONG Junfeng;SUN Feng;HOU Zhanshan;Shenyang University of Technology;The Industry Museum of China;;Research of Saving Material Method on STL Printing Technology[J];机械工程师;2015-08
5 Lu Ming;Zhang Xue-song;Chang Li;Cui Xin-ai;Liu Chao;Li Ci-hui;Li Xiang-jie;Department of Orthopedics,General Hospital of PLA;Beijisi Clinic of Administer and Support Department,GSHQ;Beijing Datsing Gio-tech Co.,Ltd.;;Preparation, performance and characterization of bioactive bone materials with plasticity[J];中国组织工程研究;2015-21
6 LUO Zhi-wei;ZHAO Xiao-shuang;LUO Ying-ying;LI Zhi-hong;School of Mechanical and Automotive Engineering,Xiamen University of Technology;;Application and Research Status of Droplet Jetting Technique[J];重庆理工大学学报(自然科学);2015-05
7 LI RUI-long;HE Ting-shu;HE Juan;College of Materials and Mineral Resources,Xi'an University Architecture and Technology;;Study on the Ratio and Properties of Total Tailings Cemented Backfill Material[J];硅酸盐通报;2015-02
8 ZHANG Hai-yan;GAO Wu-bin;DAN Zhi-gang;ZHAO Wei-jie;WANG Zhi-zeng;SHI Fei-fei;DUAN Ning;Chinese Research Academy of Environmental Sciences;Beijing Metallurgical Equipment Research Design Institute Co. ,Ltd.;;Research on Strength Failure of Autoclaved Bricks Produced from Electrolytic Manganese Residue Adding the Hill Sand as Aggregate[J];硅酸盐通报;2015-02
9 Yang Chengjun;Yang Min;Cao Jianxin;Guizhou Key Laboratory for Efficient Utilization of Mineral and Green Chemical Technology, School of Chemistry and Chemical Engineering, Guizhou University;;Study on Hydration and Hardening of Duplex Gypsum Binder of Hemihydrite Phosphogypsum and Anhydrite Phosphogypsum[J];非金属矿;2014-06
10 Xiao Yuan;Huang Yachao;Xi'an Polytechnic University;;Simulation of Pneumatic Driven Microdroplet Jetting Process and Experimental Study of Microdroplet's Uniformity[J];中国机械工程;2014-21
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 Cao Shan,Li Shujuan(School of Mechanical and Instrumental Engineering,Xi′an University of Technology,Xi′an 710048);The Influence of 3DP Processing Parameters on the Parts′ Surfact Topography[J];机械科学与技术;2012-07
2 ZHANG Hong-hai1,ZHU Tian-zhu1,CAO Shu1,SHU Xia-yun1,SUN Bo1,HU Yan2(1Huazhong Univ of Sci &Tech,Wuhan 430074,China)(2Central China Normal University,Wuhan 430079,China);3DP System Development Based on Lnkjet Printer and its Experimental Research[J];机械设计与制造;2012-07
3 ;Si_3N_4-SiC Composite Ceramic Prepared by Three Dimensional Printing and Chemical Vapor Infiltration[J];航空制造技术;2012-04
4 ;Review of Research Status for Three-Dimensional Printing Technology inRapid Prototyping of Powder Material[J];航空制造技术;2011-09
5 Wang Chong,Song Jiannong※,Li Yonglei,Dong Xiangqian,Wang Jicheng,Zhang Junkui(College of Engineering,China Agricultural University,Beijing 100083,China);Manufacture of type holes wheel based on three dimensional printing technology[J];农业工程学报;2011-03
6 ZHANG Zhuo-hui,LI Ai-jun,YANG Jin-yong,HAO Guo-dan,WANG Huan(College of Mechanical & Electronic Engineering,China University of Mining and Technology,Xuzhou Jiangsu 221116,China);Optimization Method to Fabrication Orientation of Parts in Rapid Prototyping Based on Genetic Algorithm[J];东华大学学报(自然科学版);2010-04
7 HUANG Bing,MO Jian-hua,LIU Hai-tao,LIU Hou-cai(State Key Laboratory of Plastic Forming Simulation and Die & Mould Technology,Huazhong University of Science & Technology,Wuhan 430074,China);The Property of an UV Curable Support Material Pre-Polymer for Three Dimensional Printing[J];高分子材料科学与工程;2010-06
8 ;New Progress in Fabricating Ceramic-Based Materials by Three-Dimensional Printing[J];航空制造技术;2010-02
9 YANG Xiao-ling,ZHOU Tian-rui(School of Mechanical and Electrical Engineering,Nanchang University,Nanchang 330031,China);Three dimensional printing prototyping rapidly technology and its application[J];浙江科技学院学报;2009-03
10 LIANG Yan (Lab,Guangdong University of Technology,Guangzhou 510006,China);Machining Precision Analysis of 3DP Rapid Prototyping[J];机械工程师;2009-05
【Secondary References】
Chinese Journal Full-text Database 4 Hits
1 ZHU Yanqing;SHI Jifu;WANG Leilei;ZHONG Liuwen;LI Yujian;XU Gang;Guangzhou Institute of Energy Conversion,Chinese Academy of Sciences;University of Chinese Academy of Sciences;;Current status of the three-dimensional printing technology[J];制造技术与机床;2015-12
2 Zhu Chenfei;Liu Xiaojun;Liu Xuyang;Huang Zhanjun;Hu Junhong;Aerospace Engineering College,Airforce Engineering University;Aerospace Engineering College Supervisor Orgssnization,Airforce Engineering University;The Ninth Construction Engineering Corp of China Air Harbour;Armament Department of No.94936 Army of Hangzhou in Zhejiang Province;;Study on basis material construction control index based on RSM[J];山西建筑;2015-27
3 Cheng Jiang;Wu Jiao-jiao;Xu Shou-ping;Zhou Dong-wei;Zhou Liang;School of Chemistry and Chemical Engineering,South China University of Technology;Foshan Heyu Chemical Co. ,Ltd.;Department of Light Chemical Engineering,Guangdong Industry Technical College;;Infiltrants for Post-Processing of Three-Dimension Printing Specimens[J];华南理工大学学报(自然科学版);2015-02
4 Li Shujuan;Chen Wenbin;Liu Yong;Fu Liu;School of Mechanical and Instrument Engineering,Xi'an University of Technology;;Optimization of the 3DP Printing Parameters Based on the Neural Networks and Genetic Algorithm[J];机械科学与技术;2014-11
【Secondary Citations】
Chinese Journal Full-text Database 7 Hits
1 GAO Chen, HUANG Sun-Xiang, CHEN Lei, LIU Chi-Hui, LIU Xiao-Nan, BAO Jun (National Synchrotron Radiation Lab, University of Science and Technology of China, Hefei 230029, China; Department of Physics, University of Science and Technology of China, Hefei 230026, China);Progress in InkJet Technique and Its Applications[J];无机材料学报;2004-04
2 LI Xiao-yan 1,2 ,ZHANG Shu 1(1 Tongji University, Shanghai, 200092, China)(2 Shanghai University of Science and Technology, Shanghai, 200093, China);The Application of 3D Printing Technology in Pharmaceutical Engineering[J];中国制造业信息化;2004-04
3 CUI Hai-tao, LI Qiang, WU Qiang, WANG Xu-bao, ZUO Tie-chuan ( Laser Engineering Institute, Beijing Polytechnic University, Beijing 100022, China );Powder Feeder for Laser Quick Micro-Making and Its Characteristics[J];北京工业大学学报;2002-03
4 MOU Guodong (Department of Material Engineering, Xi'an University of Science and Technology, Xi′an 710054);A STUDY ON THE PHASE-TRANSFORMATION OF THE BASSANITES DURING HYDRATION[J];硅酸盐学报;2002-04
5 MOU Guo dong MA Zhe sheng SHI Ni cheng Research Section of Crystal Structure and Crystal Chemistry,China University of Geosciences,Beijing 100083;MORPHOLOGICAL INVESTIGATIONS OF THE BASSINITES BY ELECTRONIC MICROSCOPE AND THEIR FORMATION MECHANISM ANALYSIS[J];矿物岩石;2000-03
6 YANG HANG\|SHENG 1) \ WU GUO\|TAO 1) \ ZHANG XIAO\|BIN 2) CHEN XIAO\|HUA 1) LU XIAO\|NAN 1) WANG MIAO 1) WANG CHUN\|SHENG 1) HE PI\|MO 1) \ XU ZHU\|DE 3) \ LI WEN\|ZHU 1) 1) (Department of Physi;THE INFLUENCE OF BALL-MILLING ON THE STRUCTURE OF GRAPHITE[J];物理学报;2000-03
7 Chen Wen-hao;Xu Ji-zhi Research Institute of Building Materials;STUDY OF THE DEHYDRATED PHASES OF GYPSUM AND THEIR HYDRATION[J];硅酸盐学报;1983-04
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved