Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《China Mechanical Engineering(中国机械工程)》 2009-14
Add to Favorite Get Latest Update

Dead-center Positions of Six-bar Linkages Based on Instant Centers

Guo Xiaoning Zou Yanhuo Dou Ning Fuzhou University,Fuzhou,350108  
Based on the relation of mechanical efficiency and instantaneous centers,the necessary geometric conditions for the instantaneous centers of a linkage when it was in dead-center positions were given.This methodology avoids the handling of complicated algebraic equation and remains valid for the mechanisms with prismatic joints provided instantaneous centers can be located.Based on the method possible configurations of the six-bar linkage in dead-center positions were listed,and this method presents a way for the problem of whether a crank exists in a mechanism.
【Fund】: 福建省科技三项基金资助项目(2006F5059);; 福州大学科技发展基金资助项目(2006-XQ-14)
【CateGory Index】: TH112.1
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 QI Xiao-min,YU Quan-yu,KAN Hong-lin(Dept.of Mech.Engn.,Anhui University of Technology and Science,Wuhu 241000,China);Kinematic simulation of deflection crank slider mechanism based on simulink[J];Journal of Anhui University of Technology and Science(Natural Science);2008-04
2 LU Man (School of Mechanical Engineering,AHUT,Ma'anshan 243002,Anhui,China);Exploration and Practice on the Teaching Method of Mechanical Principle Course[J];Journal of Anhui University of Technology(Social Sciences);2010-04
3 QI Zhong hua ZHI Ying (Department of Mechanics,Anshan Teachers College,Anshan Liaoning 114005,China);The Study about a Number of Teeth Affect Strength in the Design of Gear Transmission[J];Journal of Anshan Teachers College;2001-03
4 FENG Li-min~1,LIU Zhao-hua~2 (1.Anyang University, Anyang 455000,China;2.Anyang Iron & Steel Co.,Ltd, Anyang 455004,China);The New Analytical Method for Designing a Planar Rank and Rocker Mechanism According to Travel Velocity-Ratio Coefficient[J];Journal of Anyang Teachers College;2004-02
5 LIU Li-fang1,XU Peng-yun2 (1. Science College, Agricultural University of Hebei, Baoding 071001,China; 2. M & E College, Agricultural University of Hebei, Baoding 071001,China);MATLAB Application in Planar Linkage Movement Simulation[J];Journal of Baoding University;2008-02
6 WANG Congzhe,FANG Yuefa(School of Mechanical,Electronic and Control Engineering,Beijing Jiaotong University,Beijing 100044,China);Optimal synthesis of path and velocity of planar four-bar mechanisms using an evolutionary algorithm[J];Journal of Beijing Jiaotong University;2011-06
7 Luo Jiali Wang WenboDepartment of Fundamental Courses,Beijing Institute of Clothing Technology,Beijing 100029;Analytical Design About Instantaneous Center of Velocity in the n Level Planar Mechanism[J];Journal of Beijing Institute of Clothing;2002-01
8 LIU Yong-feng (Baosteel Cold Rolling mill,Shanghai 200941,China);Cause Analysis of Abnormal Vibration from Baosteel 1550mm Cold Mill' s Main Driving Jackshaft and Our Countermeasures[J];Bao Steel Technology;2004-05
9 ZHANG Mei-qin(Design & Research Institute of Baotou Steel(Group) Corp.,Baotou 014010,Nei Monggol,China);Design and Application of the Depressing Roll Apparatus[J];Science & Technology of Baotou Steel(Group) Corporation;2008-02
10 Yao Wenxi Zhang Huaicun Wang Chaoran (Department of Mechanical Engineering, Beijing Institute of Machiaery, Beijing 100085);ANALYSIS ON THE ABRASION RATE IN THE DYNAMIC MUTUAL ABRASION OF GEARS[J];JOURNAL OF BEIJING INSTITUTE OF MACHINERY;1998-04
China Proceedings of conference Full-text Database 10 Hits
1 Han Lvhua,Mao Hanping,Ding Wenqin,Sun Lei,Wu Fuhua(Key Laboratory of Modern Agriculture Equipment and Technology,Ministry of Education,Jiangsu University,Zhenjiang,212013,Jiangsu Province,China);Design of the Picking Seedling Machinery on the Plug Seedlings Auto-Transplanter[A];Chinese Society of Agricultural Engineering[C];2011
2 Minqi Cui Linjie Hui Guanghuan Tan Shunde Huang Guangzhou Auto College,South China University ofTechnology,Guangzhou 510800,China;New Tube Cleaner of Central Air Conditioner[A];[C];2008
3 Yishi Liu Xiangze Zheng Binbin Zhang Yinhua Zhang Guangzhou Auto College,South China University ofTechnology,Guangzhou 510800,China;Ventilator Automatic Cleaner[A];[C];2008
4 Tan Weiming Tang Dongwei (Mechatronic Engineering Department,Foshan University,Foshan 528000, China);Investigation on non-zero profile-shifted-modification for elliptical-gears[A];[C];2009
5 LIU Xiao-li,WU Bo (School of Electro Mechanical Engin.,Wuhan Univ.of Technology,Wuhan 430070,China);Design and Analysis of Crank Rocker Mechanism in Mechanical Torsional Vibration Vibrator[A];[C];2008
6 LIU Yahua,WANG Jinwu,WANG Jinfeng (Engineering College,Northeast Agricultural University,Harbin 150030,China);Design and Analysis on Pricking Hole Mechanism with Noncircular Gears for Deep-fertilization Liquid Fertilizer Applicator[A];[C];2011
7 ;Design and Research on Transmission Mechanism of Wiper[A];[C];1998
8 ;The New Method of the Force Analysis in Planar Mechanisms in the Presence of Frictional Forces[A];[C];1998
9 Li Jiting Guo Weidong;Relationship between Advance-to Return-time Ratio and Crank Angle between Extreme Positions of Planar Linkage[A];[C];2000
10 ZHOU Jing-ling WU Guo-qing SHEN Shi-de ZHOU Qi-su 1.Nantong Institute of Technology,Nantong 226007,China; 2.Nantong Textile Vocational Technology College,Nantong 226007,China;The Optimization of the Plane Four-bar Linkage Mechanism According to Three Correspondence Locations of Two Bar Linked Fixed-location[A];[C];2002
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved