Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《China Mechanical Engineering》 2015-01
Add to Favorite Get Latest Update

Theoretical Calculation and Experimental Analyses of Natural Frequency for High Frequency Dynamometer

Huang Zhen;Zhao Wei;Nanjing University of Aeronautics & Astronautics;  
Concerning the low natural frequency of dynamometers for high speed cutting to acquire forces signals,a initial model of high frequency dynamometer was designed and its natural frequency can be as 9kHz.Based on the method of Dunkerley,a simplified model of the dynamometer was built to achieve the theoretical natural frequency and the computational formula.Meanwhile,the simulation values and actual values of the natural frequency were obtained by modal analysis with the use of the finite element simulation and vibration modal test,and the high speed cutting test was conducted for the validation.The results indicate that theoretical values and simulation values are a little greater than the actual values,and the dimensions of key structure have an great impact on the natural frequency,which provide a necessary reference for the structure optimization of similar dynamometers.
【Fund】: 国家重点基础研究发展计划(973计划)资助项目(2009CB724401)
【CateGory Index】: TH823
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
Chinese Journal Full-text Database 4 Hits
1 Jin Wenlin Zhang Youzhen Chu Tao (Department of Mechanical Engineering);Parasitic Elastic Element Method for Cutting Dynamometer Design[J];Journal of Nanjing University of Aeronautics & Astronautics;1991-03
2 Sun Yonghua,Zhao Wei,He Ning,Li Liang(College of Mechanical and Electrical Engineering,Nanjing University ofAeronautics & Astronautics,Nanjing,210016,China);Design of High Frequency Three-Dimensional Dynamic Milling Force Test Platform[J];Journal of Nanjing University of Aeronautics & Astronautics;2012-S1
3 Liu Zhanqiang(Shandong University, Jinan,China) Wan Yi Ai Xing;Cutting Forces in High Speed Milling[J];China Mechanical Engineering;2003-09
4 Qiu Jian1 Li Xiaofei2 Ma Xiaobo1 Lin Jianfeng1 Tong Jian1 1.State Key Laboratory,Shenyang Machine Tool(Group) Co.,Ltd.,Shenyang,110142 2.Shenyang North Traffic Heavy Industry Group,Shenyang,110015;Experimental Study of Cutting Forces on High Speed Milling Aluminum Alloy Using Carbide End Mill[J];China Mechanical Engineering;2012-13
Chinese Journal Full-text Database 10 Hits
1 XU Chun-ting,ZHANG Chong(The 38th Research Institute of CETC,Hefei 230031,China);A Study on Milling Forces in High Speed Milling[J];Electro-Mechanical Engineering;2009-01
2 Long Zhenhai, Wang Xibin, Wang Haochen (School of Mechanical & Vehicle Engineering, Beijing Institute of Technology, Beijing 100081, China);Study on the Nonlinear Characteristics of Cutting Forces in High-speed Face-milling of Difficult-to-cut Materials by AR Spectrum Analysis and Wavelet Analysis[J];Engineering Science;2004-10
3 Shang Guangqing Sun Chunhua;Simulation Study on Parametric Effect on Cutting Force under High-speed Machining[J];Tool Engineering;2008-06
4 Fu Zhifang Lecturer,Loudi Vocational & Technical College,Loudi,Hunan 417000,China;Study on Non-linear Characteristics of Cutting Forces in High Speed Machining of High Strength Steel with Carbide Tools[J];Tool Engineering;2011-03
5 Hou Junming,Wang Baosheng,Wang Mulan,Feng Yong Master,Advanced Manufacturing Technology & Engineering Center,Nanjing Institute of Technology,Nanjing 211167,China;FEA of Cutting Force Factors in High-speed Machining[J];Tool Engineering;2011-05
6 ZHAO Xue~1,ZHANG Na~1,GONG Jian-rong~2(1.College of Mechano-Electronic Engineering,Lanzhou Univ.of Tech.,Lanzhou 730050,China;2.Gansu Electric Power Mingzhu Group Co.Ltd,Lanzhou 730070,China);Design of processing device for the spot recovery of flange sealing-face on large-sized pressure vessels[J];Journal of Lanzhou University of Technology;2006-04
7 Liu Yingchun,Lin Qi,Pang Jiyou,Liu Zhanqiang,Weifang University of Science and Technology,Shouguang,Shandong 262700,China;Finite Element Analysis for Effects of Cutting Parameters on Cutting Force and Cutting Temperature during End Milling of Ti6Al4V[J];Tool Engineering;2012-10
8 Ge Renpeng,Qiu Jian,Ma Xiaobo Ge Renpeng,Master,Assistant Engineer,State Key Laboratory,Shenyang Machine Tool(Group) Co.Ltd.,Shenyang 110142,China;Experiment Research of Cutting Force Test of 45 Steel on New Generation CNC Lathe Prototype[J];Tool Engineering;2013-05
9 ZENG Lin-lin;ZHOU Li-ping;LIU Xiao-ying;School of Mechanical Engineering and Automation,Xi Hua University;;Simulation Analysis of Influence of Tool Geometric Angle on the High Speed Milling Performance[J];Journal of Chengdu Textile College;2014-01
10 Zhou Wenchao;Yang Yinfei;Li Liang;Zhao Ming;Zhao Wei;Nanjing University of Aeronautic and Astronautics;;Experimental Study on Milling Force of High-temperature Alloy GH706[J];Tool Engineering;2014-08
【Secondary Citations】
Chinese Journal Full-text Database 6 Hits
1 Yang Guangyong(School of Mechanical Engineering, Beijing Institute of Technology,Beijing 100081);T-v Relahonship and Cutting Force in High Speed Cutting Processes[J];JOURNAL OF BEIJING INSTITUTE OF TECHNOLOGY;1996-03
2 Jiang HaiyanYuan FengChen ZhongDing Zhenliang (Department of Automatic Test, Measurement and Control, Harbin Institute of Technology,Harbin 150001;Resistance Strain Gauge Force Sensor with Serial Structure[J];JOURNAL OF TRANSDUCER TECHNOLOGY;1999-03
3 Zhao Zhi-mei, Xie Xi-jun;Study of Dynamometer for Surface Grinding[J];;1981-02
4 Cai Li jun Yuan Zhejun;Analysis of Strain Dynamometer and a New Break-through of It[J];Journal of Harbin Institute of Technology;1985-A6
5 Liu Peng,Xu Jiuhua,Feng Suling,Fu Yucan,Geng Guosheng(College of Mechanical and Electrical Engineering,Nanjing University of Aeronautics &Astronautics,Nanjing,210016,China);Cutting Forces in High Speed Milling of Titanium Alloy with PCD Tool[J];Journal of Nanjing University of Aeronautics & Astronautics;2010-02
6 YANG Zhaojian,WANG Qinxian(Taiyuan University of Technology, Taiyuan 030024,China);An overview on the study and development of the force sensor[J];Shanxi Machinery;2003-01
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved