Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《China Mechanical Engineering》 2016-02
Add to Favorite Get Latest Update

Assembly Accuracy Allocation Method Based on JSS Matrix

Lü Cheng;Liu Zijian;State Key Laboratory of Advanced Design and Manufacture for Vehicle Body,Hunan University;  
Joint surface error was described by SDT,typical joint surface error transfer properties were analyzed.Information integrated expression symbols of joint surfaces were defined,combined with the polychromatic sets theory,JSS matrix,was established,that could describe assembly relationship,joint surface type and error transfer properties,and then assembly error transfer path search method was proposed,critical error distribution that affected the precision of assembly was identified.Assembly error model was established based on the multi-body kinematics principles,and combined with assembly accuracy requirements,the accuracy allocation of joint surface and the relevant geometric element were implemented,then the basis was provided for tolerance design and accuracy control during assembly process.At last,the feasibility and practicability of the proposed method was verified by example analyses.
【Fund】: 国家自然科学基金资助项目(51175161 51475152)
【CateGory Index】: TG95
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【Citations】
Chinese Journal Full-text Database 7 Hits
1 LüCheng;Liu Zijian;State Key Laboratory of Advanced Design and Manufacture for Vehicle Body,Hunan University;;Parallel Joint Surface Error Modeling Based on Assembly Positioning Priority[J];中国机械工程;2015-24
2 ZHANG Yan;MO Rong;Key Lab of Contemporary Design and Integrated Manufacturing Technology,Ministry of Education,Northwestern Polytechnical University;;Multi-objective optimization design based on grey particle swarm optimization algorithm for aircraft assembly tolerance[J];计算机集成制造系统;2014-08
3 BO Chao-wang;YANG Zhi-hong;WANG Lin-bo;CHEN Hong-qian;Key Laboratory of High-efficiency and Clean Mechanical Manufacture,Ministry of Education,School of Mechanical Engineering,Shandong University;;Review and outlook of dimensional engineering[J];计算机集成制造系统;2014-03
4 Huang Qiang Li Qingfeng Chongqing University of Technology,Chongqing,400054;Buliding and Application of General Model for Machine Tool Errors[J];中国机械工程;2013-12
5 YANG Bo1 GAO Changqing1 HUANG Kezheng2 LI Haitao1(1.School of Mechanical Engineering,University of Jinan,Jinan 250022; 2.School of Mechanical Engineering,Shandong University,Jinan 250061);Tolerance Evolutionary Strategy in Incremental Growth Design[J];机械工程学报;2012-07
6 JIN Qiu,MO Shuai(College of Mechanical Engineering,Tianjin University of Science & Technology,Tianjin 300222,China);Concurrent Tolerancing Optimization Design Based on Improved Cost-Tolerance Model[J];天津科技大学学报;2010-05
7 WU Zhao-qiang (Tsinghua University,Beijing 100084,China);Stimulated tolerances modeling based on small displacement torsors and tolerances analysis[J];机械设计与制造;2010-01
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 LüCheng;Liu Zijian;State Key Laboratory of Advanced Design and Manufacture for Vehicle Body,Hunan University;;Parallel Joint Surface Error Modeling Based on Assembly Positioning Priority[J];中国机械工程;2015-24
2 Lü Cheng;LIU Zijian;AI Yandi;YU Zhimin;State Key Laboratory of Advanced Design and Manufacture for Vehicle Body,Hunan University;;Assembly Joint Surface Error Modeling and Tolerance Optimization in the Case of Coupled Tolerance[J];机械工程学报;2015-18
3 Lü Cheng;LIU Zijian;QIN Huan;AI Yandi;State Key Laboratory of Advanced Design and Manufacture for Vehicle Body,Hunan University;;Method of Calculating the Assembly Error Transfer Path Based on JSS Matrix[J];机械工程学报;2015-20
4 CHENG Bin-bin;WANG Zhi-yue;HUANG Mei-fa;WU Chang-lin;SUN Yong-hou;QIN Zu-he;School of Mechanical and Electrical Engineering,Guilin University of Electronic and Technology;No.45 Research Institute of CETC;;Optimized Mathematical Tolerance Model Based on the Service Life[J];组合机床与自动化加工技术;2015-07
5 Zhao Yanming;Liu Deshun;Wen Zejun;School of Information and Electrical Engineering,Hunan University of Science and Technology;Hunan University of Science and Technology,Hunan Provincial Key Laboratory of Health Maintenance for Mechanical Equipment;;Research on the Product Tolerance System Redesign for User Performance Requirements[J];机械设计与研究;2015-03
6 JIAO Yanyan;WU Jianmin;XIAO Jingwen;DING Yide;School of Mechanical Engineering,Shanghai University of Engineering Science;Shanghai Shangguang Microscope Co. Ltd.;;Mechanical System Design of Novel Automatic Abbe Refractometer[J];轻工机械;2015-01
7 CHEN Kui;ZHANG Hua-guo;SHUAI Li-guo;ZHONG Jian-feng;LIU Guo-wei;School of Mechanical Engineering,Southeast University;Nanjing Research Institute of Electronics Technology;Nanyang Cigarette Factory of Henan Tobacco Industry Co.,Ltd.;;Tolerance Optimization Based on Improved Cost-tolerance Model and PSO Algorithm[J];电子机械工程;2015-01
8 ZHAO Man;MAO Jian;College of Mechanical Engineering,Shanghai University of Engineering Science;;Research on model of assembly tolerance for manufacturing process[J];工程设计学报;2014-06
9 ZHONG Wei-yu;YAN Yue-hui;WANG Hui-fen;LIU Ting-yu;LIANG Guang-xia;CAI Shang-wen;School of Mechanical Engineering,Nanjing University of Science & Technology;Research &Development Center of Aviation Guidance Ammunition,China South Industries Group Corporation;Beijing Institute of Space Long March Vehicle;Beijing Aero Tech Engine Control System Co.,Ltd.;;Worst-case and statistical three-dimensional tolerance analysis based on QCSP and MC[J];计算机集成制造系统;2015-03
10 Yin Zhifeng;Ge Xinfeng;Jin Jingtao;Li Ruihua;Li Xiaogang;College of Electrical & Information Engineering,Xuchang University;;The automobile differential cross-axis machining error analysis[J];现代制造工程;2014-07
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 JIANG Ke;LIU Jianhua;NING Ruxin;GUO Chongying;School of Mechanical Engineering,Beijing Institute of Technology;;Variation Analysis and Assembly Success Rate Computation for Clearance Fit under Constraint of Location Priority[J];机械工程学报;2014-15
2 Huang Qiang Li Qingfeng Chongqing University of Technology,Chongqing,400054;Buliding and Application of General Model for Machine Tool Errors[J];中国机械工程;2013-12
3 LIU Zheng (Dongfeng Liuzhou Motor Co.,Ltd.,Liuzhou Guangxi 545005);Introduction of Dimensional Engineering of Body-In-White[J];企业科技与发展;2012-13
4 YANG Si-yuana,TU Xiongb,LI Junb(a.School of Transportation Engineering;b.School of Mechanics and Automotive Engineering, Chongqing Jiaotong University,Chongqing 400074,China);Research on Dimension Engineering in the Body-in-white's Manufacturing[J];重庆理工大学学报(自然科学);2012-06
5 HU Lei1,RUAN Wei2(1.Magnasteyr China,Wuhan Branch,Wuhan 430056,China;2.Dongfeng Commercial Vehicle Technical Centre,Wuhan 430056,China);Precise Control Technique of BIW with Dimensional Management[J];汽车科技;2010-05
6 Huang Qiang1 Zhang Genbao2 Ren Xianlin21.Chongqing University of Technology,Chongqing,4000502.Chongqing University,Chongqing,400044;Tolerance Design and Application for Machine Tool Based on Geometry Error Source Compensation Each Other[J];中国机械工程;2010-05
7 YANG Jiangxin1,2 XU Xusong1,3 CAO Yanlong1,2 LIU Yancong3 (1. Institute of Manufacturing Engineering,Zhejiang University,Hangzhou 310027; 2. Zhejiang Province Key Laboralory of Advanced Manufacturing Technology,Hangzhou 310027; 3. College of Mechanical and Electronic Engineering,China University of Petroleum (Huadong),Dongying 257061);Functional Tolerance Specification Design Based on Assembly Positioning[J];机械工程学报;2010-02
8 ZHANG Kai-fu,LI Yuan,CHENG Hui (Ministry of Education Key Lab of Contemporary Design and Integrated Manufacturing Technology,Northwestern Polytechnical University,Xi'an 710072,China);Modeling and analyzing approach for self-adaptively matching tolerance and performance[J];计算机集成制造系统;2009-10
9 ;Tolerance Analysis and Optimization Design[J];汽车工程师;2009-05
10 FU Ying-bin,JIANG Ping-yu,LIU Dao-yu(State Key Lab for Manufacturing Systems Engineering,Xi'an Jiaotong University,Xi'an 710049,China);Optimization approach for multi-process dimension and its tolerance[J];计算机集成制造系统;2009-01
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved