Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《China Mechanical Engineering》 2018-07
Add to Favorite Get Latest Update

High-performance Precision Manufacturing

GUO Dongming;Key Laboratory for Precision and Non-Traditional Machining Technology of the Ministry of Education,Dalian University of Technology;  
High-performance manufacturing is the integrated manufacture of function and geometry,which aims at the precise guarantee of key parts of high-end equipment and products.It indicates the great progresses from the conventional manufacture with requirements of geometrical dimensioning and tolerancing to the advanced manufacture with primary requirements of high performance.From the points of view of the current status,requirements and development trend of manufacture,the features,facing challenges and its classification of high-performance manufacturing,as well as the connotations of high-performance parts,were analyzed and explained in depth combined with application examples.It provides a feasible route and solution strategy for the precise manufacture of a large number of key parts in high-end equipments.
【Fund】: 国家自然科学基金资助项目(51621064)
【CateGory Index】: TH16
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【Citations】
Chinese Journal Full-text Database 6 Hits
1 GUO Dongming;SUN Yuwen;JiA Zhenyuan;Key Laboratory for Precision& Non-traditional Machining of Ministry of Education,Dalian University of Technology;;Methods and Research Progress of High Performance Manufacturing[J];机械工程学报;2014-11
2 YANG Rui1,2 ZHANG Qiang1 SUN Shiyong1 ZHAO Bowen1 GUO Dongming1,2(1.School of Mechanical and Engineering,Dalian University of Technology,Dalian 116024;2.Key Laboratory for Precision and Non-traditional Machining Technology of Ministry of Education,Dalian University of Technology,Dalian 116024);Error-correction Method of the Modal Frequency for the Manufacturing of Wing Flutter Model with Structure-similarity[J];机械工程学报;2013-08
3 ;Ultrasonic Assisted Machining of Difficult-to-Cut Material[J];航空制造技术;2012-16
4 CHU JinKui1,2,MENG FanTao1,2,HAN ZhiTao1,2 & GUO Qing1,2 1 Key Laboratory for Micro/Nano Technology and System of Liaoning Province,Dalian University of Technology,Dalian 116024,China;2 Key Laboratory for Precision and Non-traditional Machining Technology of Ministry of Education,Dalian University of Technology,Dalian 116024,China;Large area mold fabrication for the nanoimprint lithography using electron beam lithography[J];Science China(Technological Sciences);2010-01
5 DONG Hui-yue,KE Ying-lin (College of Mechanical and Energy Engineering, Zhejiang University, Hangzhou 310027, China);Study on Machining Deformation of Aircraft Monolithic Component by FEM and Experiment[J];Chinese Journal of Aeronautics;2006-03
6 CHU Jin-kui,ZHAO Kai-chun(Key Laboratory of Technology Precision & Non-traditional Machining of Ministry of Education,Dalian University of Technology,Dalian 116023,China);Study of Angle Measurement Optoelectronic Model on Emulating Polarization-Sensitive Compound Eye of Insect[J];微纳电子技术;2005-12
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 LI Jia;GAO Jianwei;YUAN Anbo;YANG Xiuwei;YANG Hong;Chongqing Optoelectronics Research Institute;;Study on Lithography Pattern Stitching of Large Array CCD[J];半导体光电;2015-06
2 CHEN Tao;LIU Xianli;LI Suyan;LI Kai;LIU Tao;School of Mechanical and Power Engineering, Harbin University of Science and Technology;;Mechanism of White Layer Formation on Machined Surface of High-speed Hard Machining[J];机械工程学报;2015-23
3 LONG Zhili;LIN Xiangwei;WANG Shuye;FAN peng;Shenzhen Graduate School,Harbin Institute of Technology;Manufacturing Engineering Institute,Dongguan Huazhong University of Science and Technology;;The simulation and experiment of new non-contract electromagnetic conversion device in ultrasonic machining[J];哈尔滨工业大学学报;2015-09
4 YAN Changgang;LIU Yu;CUI Yunxian;DENG Xiaoyun;School of Mechanical Engineering,Dalian Jiaotong University;;Feature Line Method of Tool Axis Trajectory Planning for Non-developable Ruled Surface Flank Milling with Conical Tools[J];机械工程学报;2015-19
5 Wang Minghai;Wang Jinggang;Zheng Yaohui;Li Shiyong;Gao Lei;Key Laboratory of Fundamental Science for National Defense of Aeronautical Digital Manufacturing Process,Shenyang Aerospace University;;Finite Element Simulation and Analysis of Titanium Alloy under High-speed Milling[J];机械科学与技术;2015-06
6 SUN YuWen;GUO DongMing;JIA ZhenYuan;Key Laboratory for Precision and Non-Traditional Machining Technology of Ministry of Education, Dalian University of Technology;;Integrated measurement and machining technology of complex surfaces[J];科学通报;2015-09
7 SHAO Tian-min;GENG Zhe;State Key Laboratory of Tribology,Tsinghua University;;Research Progress in Patterned Thin Solid Film Techniques and Their Tribological Performance[J];中国表面工程;2015-02
8 GUAN Guixia;HAN Yuzhang;WU Minhua;HAN Jianguo;Information Engineering College,Capital Normal University;Department of Computer Science,Duke University;School of Information Science and Technology,Beijing University of Chemical Technology;;The anti-noise algorithm of azimuth based on sky-lighted polarization pattern[J];哈尔滨工程大学学报;2015-03
9 HAN Guang-chao;SUN Ying;SUN Ming;LI Yan-yun;College of Mechanical & Electronic Information,China University of Geosiences;State Key Laboratory of Materials Processing and Die & Mould Technology,Huazhong University of Science and Technology;College of Information Engineering,China University of Geosciences;;Design and simulation for a porous rectangular block ultrasonic horn[J];振动与冲击;2014-19
10 LI Bin;GUAN Le;LIU Qi;CHU Jin-kui;Key Laboratory of Technology Precision & Non-traditional Machining of Ministry of Education,Dalian University of Technology;;A novel imaging bionic polarization navigation sensing device based on skylight[J];传感器与微系统;2014-08
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 JIA Zhenyuan;WANG Yongqing;WANG Fuji;MA Jianwei;GUO Dongming;Key Laboratory for Precision and Non-traditional Machining Technology of Ministry of Education,Dalian University of Technology;;Research on Measure-redesign-machining Integration Manufacturing Method for Complicated Surface Parts with High Performance[J];机械工程学报;2013-19
2 HUANG Xin-chun,ZHANG Ding-hua,YAO Chang-feng,REN Jing-xin(Ministry of Education Key Laboratory of Contemporary Design and Integrated Manufacturing Technology,School of Mechatronics, Northwestern Polytechnical University,Xi'an 710072,China);Effects of grinding parameters on surface integrity of GH4169 nickel-based superalloy[J];航空动力学报;2013-03
3 LI Dichen1 HE Jiankang1 TIAN Xiaoyong1 LIU Yaxiong1 ZHANG Anfeng1 LIAN Qin1 JIN Zhongmin1,2 LU Bingheng1(1.State Key Laboratory for Manufacturing Systems Engineering,Xi’an Jiaotong University,Xi’an 710049;2.School of Mechanical Engineering,University of Leads,Leads LS2 9JT,UK);Additive Manufacturing:Integrated Fabrication of Macro/Microstructures[J];机械工程学报;2013-06
4 Xu Wenji Zhao Yong Sun Jing Hu Ke Song Jinlong Dalian University of Technology,Dalian,116024;Experimental Study of Super-hydrophobic Surfaces Obtained on Steel Matrix by Brush Plating Technique[J];中国机械工程;2013-01
5 Wu Dongjiang, Chen Yunxiao, Lu Weifeng, Ma Guangyi, Guo Yuquan, Guo Dongming (Key Laboratory for Precision and Non-traditional Machining Technology of Ministry of Education, Dalian University of Technology, Dalian 116024, China);Dilution Characters of Al_2O_3-13wt%TiO_2 Coating by Direct Laser Cladding on Titanium Alloy[J];稀有金属材料与工程;2012-12
6 WU Zhi-li,ZHU Xiao-peng,LEI Ming-kai(Surface Engineering Laboratory,School of Materials Science and Engineering,Dalian University of Technology,Dalian 116024,Liaoning);Progress in Deposition Principle and Process Characteristics of High Power Pulse Magnetron Sputtering[J];中国表面工程;2012-05
7 XU Jin-yang,ZHENG Xiao-hu,AN Qing-long,CHEN Ming(School of Mechanical Engineering,Shanghai Jiaotong University,Shanghai 200240,China);Wear Mechanism of Tool in High-speed Milling of Titanium Alloy TC6[J];上海交通大学学报;2012-07
8 GUO Qiang,SUN YuWen & GUO DongMing Key Laboratory for Precision and Non-Traditional Machining Technology of the Ministry of Education,Dalian University of Technology, Dalian 116024,China;Analytical modeling of geometric errors induced by cutter runout and tool path optimization for five-axis flank machining[J];Science China(Technological Sciences);2011-12
9 Guo Dongming(Key Laboratory for Precision & Non-traditional Machining of Ministry of Education, Dalian University of Technology,Dalian,Liaoning 116024,China);Function-geometry integrated precision machining methods and technologies for high performance workpieces[J];中国工程科学;2011-10
10 LING Si-ying1,WANG Li-ding1,2,LI Ke-hong1,MA Yong1(1.Key Laboratory for Precision & Non-traditional and Micro System Machining of the Ministry of Education,Dalian University of Technology,Dalian 116023,China;2.Key Laboratory for Micro/Nano Technology and System of Liaoning Province,Dalian University of Technology,Dalian 116023,China);Ultra-precision gear-grinding processing based on class 1 master gear[J];光学精密工程;2011-07
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved