Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
Full-Text Search:
Forging & Stamping Technology
FQ: 月刊
AD of Publication: 北京市
Lanuage: 中文;
ISSN: 1000-3940
CN: 11-1942/TG
YP: 1958
Url: 北京机电研究所;中国机械工程学会塑性工程分会
Recommended Journals
Forging & Stamping Technology
2010 -01
Catalog
Research progress of fabricating ultrafine-grained composites by severe plastic deformation GUO Wei1,2,WANG Qu-dong1,2(1.National Engineering Research Center of Light Alloy Net Forming,Shanghai Jiao Tong University,Shanghai 200240,China;2.State Key Laboratory of Metal Matrix Composites,Shanghai Jiao Tong University,Shanghai 200240,China)
Effects of SiC particles on thixotropic compression behavior of SiCp/AZ61 composites ZHANG Fa-yun1,YAN Hong2(1.Department of Solar Energy Science and Engineering,Xinyu College,Xinyu 338000,China;2.Institute of Advanced Forming and Manufacturing and Die and Mold,Nanchang University,Nanchang 330029,China)
Active beam repair of 16000kN horizontal double-action extruding press YANG Guo-yi(Henan Jianghe Machinery Co.,Ltd.,Lushan 467337,China)
Study on process influence on feedstock diameter in continuous extrusion GUO Hua-zhong,SONG Bao-yun,CHEN Li(Department of Material Science and Engineering,Dalian Jiaotong University,Dalian 116028,China)
Research on synchronous balancing system for hydraulic press based on PLC and PID DUAN Jun,HUANG Ming-hui,ZHAN Li-hua,TU Jiang-tao(College of Mechanical and Electrical Engineering,Central South University,Changsha 410083,China)
Design analysis and application of hydraulic overload protector for press RUAN Wei-ping,HE Shi-zhen,WANG En-fu(Guangdong Metal Forming Machine Works Co.,Ltd.,Foshan 528300,China)
Simulation analysis of extrusion speed influence to porthole die life PANG Zu-gao,ZHANG Yin-yi,TANG Zhi-qiang,DING Yang(College of Mechanical Engineering,Guangxi University,Nanning 530004,China)
Design on link and ball screws power source of electric punch WANG Guo-liang,FENG Rong-biao,LUO Ming-er(Shaoxing Quality and Technology Supervision and Test Institute,Shaoxing 312071,China)
Research on bottom dead center(B.D.C) of high speed precision press LU Xin-jian1,KE Zun-mang2,ZHU Si-hong1,ZHOU Jun2(1.College of Engineering,Nanjing Agricultural University,Nanjing 210031,China;2.Jiangsu Xuzhou Metal-Forming Machine Group Co.,Ltd.,Xuzhou 221116,China)
Numerical simulation on aluminum profile extrusion based on ALE method WANG Yao,ZHOU Zhao-yao,PAN Jian-yi,LIU Liang,WU Yuan-biao(College of Mechanical and Automotive Engineering,South China University of Technology,Guangzhou 510640,China)
Optimization design of cold upsetting process in steel bearings ball based on Defrom FU Cai-an,HUA Xin-feng,WANG Xian(School of Mechanical Engineering,Jiangnan University,Wuxi 214122,China)
Research on method of blank sheet design based on forward and backward simulation ZHANG Yan-qin,ZHOU Tai-an,LI Long-gen(Department of Electromechanical Engineering,Dongguan Polytechnic,Dongguan 523808,China)
Forging and heat treatment technology study of EA4T material LIU Geng-wu(Department of Electrical and Mechanical Engineering,Hunan Railway Professional Technology College,Zhuzhou 412001,China)
Effects of manufacturing process on contact area of LCD terminal LIANG Jian-jun1,RUAN Feng1,XIAO Min2(1.School of Mechanical and Automotive Engineering,South China University of Technology,Guangzhou 510640,China;2.Yidong Electronic Co.,Ltd.,Dongguan 523125,China)
Forging failure analysis of high strength aluminum-bronze alloys ZHOU Zhi-ming,TANG Li-wen,CHEN Yuan-fang,CAO Min-min,LEI Bin-bin(College of Material Science and Engineering,Chongqing University of Technology,Chongqing 400050,China)
Study on process optimization of large-scale crankshafts used for ships HU Jin-hua(Mechanical Engineering College,Yanshan University,Qinhuangdao 066004,China)
Analysis and prevention of forging cracks HE Wen-wu,GUO Hui-guang,LIU Jian-sheng(School of Materials Science and Engineering,Taiyuan University of Science and Technology,Taiyuan 030024,China)
Study on isothermal forging temperature of high damage-tolerant titanium alloy WANG Xiao-chen,GUO Hong-zhen,SHI Zhi-feng,WANG Yan-wei,YAO Ze-kun(School of Material Science and Engineering,Northwestern Polytechnical University,Xi'an 710072,China)
Numerical analysis of metallic tube end inward coiling formation LIU Bai,LIU Ming-jun,ZHAO Zhen-yu,JIANG Jun-xia,ZHANG Lei-ming(Department of Control and Manufacturing,Shenzhen Institute of Information Technology,Shenzhen 518029,China)
Simulation and experimental research on high pressure sheet metal forming of tailor rolled blank WU Jiang-miao,YANG Zhi-qiang(Vehicle Engineering Department,Zhejiang Normal University,Jinhua 321019,China)
Study on oral free bending of thin-walled tube nosing with straight pipe by conical curved die XU Lan-gui,RUAN Feng,LI Zhen-dong(Machinery and Automobile College,South China University of Technology,Guangzhou 510640,China)
Features of axial metal flow in heavy section shrinkage cross wedge rolling JIA Zhen,TANG Xian-gang,ZHANG Kang-sheng,HU Zheng-huan(School of Mechanical Engineering,University of Science and Technology Beijing,Beijing 100083,China)
Numerical simulation of thixo-co-extrusion for double-layer tube with equal wall thickness WANG Kai-kun,WANG Xi,WANG Fu-yu,MENG Hai-feng,DU Yan-mei(School of Materials Science and Engineering,University of Science and Technology Beijing,Beijing 100083,China)
Numerical simulation and experimental investigation on one-path deep drawing spinning of conical part XIA Qin-xiang1,ZHANG Shuai-bin1,WU Xiao-yu1,CHENG Xiu-quan2(1.School of Mechanical and Automotive Engineering,South China University of Technology,Guangzhou 510640,China;2.Department of Airplane Maintenance Engineering,Guangzhou Civil Aviation College,Guangzhou 510403,China)
Influence of preformed blank on spin-forming of cup-shaped thin-walled trapezoidal inner gear SUN Ling-yan,YE Bang-yan,XIA Qin-xiang(School of Mechanical and Automobile Engineering,South China University of Technology,Guangzhou 510640,China)
Research on inner spinning technolgy for profiled inward belt stiffenered workpiece MA Shi-cheng,WANG Zhen-jie,WANG Dong-po(Aerospace Research Institute of Special Material and Processing Technology,Beijing 100074,China)
Study on isothermal extrusion and bulging technology of magnesium alloy wheel YIN Yin-yin1,2,YANG Yong-shun1,2,GUO Jun-qing1,2(1.College of Material Science and Engineering,Henan University of Science and Technology,Luoyang 471003,China;2.Henan Key Laboratory of Advance Non-ferrous-material,Luoyang 471003,China)
Surface plastic deformation regularity and microstructural evolution in ball milling of Q235 billet REN Tao-lin1,XIE Bin-tao2,XU Wen-chen1,SHAN De-bin1,LV Yan1(1.School of Materials Science and Engineering,Harbin Institute of Technology,Harbin 150001,China;2.Press Section Technology Department,First Automotive Works Car Co.,Ltd.,Changchun 130012,China)
Hydraulic bulging of titanium alloy seamless T-type tube fittings ZHANG Yong-qiang,HU Wei-min,ZHAO Guo-chao,SHEN Tao(Luoyang Ship Material Research Institute,Luoyang 471039,China)
Photoplasticity experiment research on strain distribution of cross wedge rolling JI Liang-bo1,CHEN Fang1,ZHOU Tian-rui2(1.School of Mechanical and Materials Engineering,Jiujiang University,Jiujiang 332005,China;2.School of Mechanical and Electronic Engineering,Nanchang University,Nanchang 330031,China)
New technology of solid granule medium deep drawing and forming die design ZHANG Ling-yun,YUAN Hai-huan(Liaoning Key Lab of Digital Processes Simulation and Test Technology,Shenyang Institute of Aeronautical Engineering,Shenyang 110136,China)
Design of multi-position progressive die for a zipper puller CHANG Chun,XIONG Hong-miao(School of Material Science and Engineering,Nanchang Hangkong University,Nanchang 330063,China)
Die structural optimization of automobile panel based on numerical simulation of sheet metal forming XU Zi-li1,Maurice LOU2,GUO Zhi-yong1,ZHU Xiang-hui1(1.College of Science,Xi'an University of Science and Technology,Xi'an 710054,China;2.Engineering Planning and Design Institute,Chery Automobile Co.,Ltd.,Wuhu 241006,China)
Component PDM system construction for die and mould enterprises YAO Yan(School of Mechanical and Electrical Enginerring,Shenzhen Polytechnic College,Shenzhen 518055,China)
Design and technological analysis of progressive die for motor rotor and stator ZHAO Zhan-feng,KANG Jun-yuan,GUAN Yu-jie(Mechanical and Electrical Department,Guangdong Technical College of Light Industry,Guangzhou 510300,China)
Analysis of energy consumption and energy-saving approaches for crank presses FANG Ya1,SUN You-song1,SHI Guo-liang1,XIAO Yang1,LI Mian1,LI Shao-pei2,LI Xin-zhong2(1.Facaulty of Materials and Energy,Guangdong University of Technology,Guangzhou 510006,China;2.Guangdong Hongxing Machinery Co.,Ltd.,Foshan 528313,China)
T281 environment-friendly and air resistant glass lubricant for precision forging of titanium alloys DUAN Su-jie,LI Xi-chun(Beijing TLC Glass Technology Exploitation LTD.,Beijing 100023,China)
Research on ductile fracture criterion in plastic deformation processes YU Song1,FENG Wei-ming1,WANG Rong2(1.School of Civil Engineering,Shandong University,Ji'nan 250061,China;2.Department of Engineering Management,Shandong Urban Construction Vocational College,Ji'nan 250014,China)
Microstructure evolution modeling of TC6 during hot-working process QI Guang-xia1,LI Ye1,CHEN Xiao-feng2(1.College of Materials Science and Engineering,Shenyang Ligong University,Shenyang 110159,China;2.Shenyang Liming Aero-Engine Group Corporation,Shenyang 110043,China)
Model of constitutive relationship for TB8 alloy based on BP neural network ZHANG Qing1,LI Ping2,XUE Ke-min2(1.Department of Mechanical Engineering,Anhui Vocational and Technical College,Hefei 230051,China;2.Institute of Material Science and Engineering,Hefei University of Technology,Hefei 230009,China)
High-temperature mechanical simulation and analysis of 25CrMo4 used for mirror plate LUO Jin-ping,ZHONG Yue-xian,MA Qing-xian,GAO Xin(Key Laboratory for Advanced Materials Processing Technology of Ministry of Education,Department of Mechanical Engineering,Tsinghua University,Beijing 100084,China)
Research and application of virtual simulation of automatic press line for automobile panel GAO Chong-hui1,ZHAO Zhen1,LI Yu-qiang2,LU Ni-feng2,LIU Fu-qiang2(1.Engineering Research Center of National Die and Mold CAD,Shanghai Jiaotong University,Shanghai 200030,China;2.Shanghai Superior Die Technology Co.,Ltd.,Shanghai 201209,China)
Calculation method study on closing die radial extrusion force of floating die GUO Kun-long1,XIN Xuan-rong1,2,LIU Ting1,2,LIU Xin-cheng2(1.College of Material Science and Engineering,Henan University of Science and Technology,Luoyang 471003,China;2.Luoyang Qin Han Cold Forging Ltd.,Luoyang 471003,China)
Network control system design for electro hydraulic servo system based on PROFIBUS-DP TANG Qing-bo,HE Xue-wen(School of Mechanical and Electrical Engineering,Jiangxi University of Science and Technology,Ganzhou 341000,China)
2010 Issues:  [01] [02] [03] [04] [05] [06]
More Issues:   [1993]   [1994]   [1995]   [1996]   [1997]   [1998]   [1999]   [2000]   [2001]   [2002]   [2003]   [2004]   [2005]   [2006]   [2007]   [2008]   [2009]   [2011]   [2012]   [2013]   [2014]   [2015]   [2016]   [2017]   [2018]   [2019]
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved