Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
Full-Text Search:
Forging & Stamping Technology
FQ: 月刊
AD of Publication: 北京市
Lanuage: 中文;
ISSN: 1000-3940
CN: 11-1942/TG
YP: 1958
Url: 北京机电研究所;中国机械工程学会塑性工程分会
Recommended Journals
Forging & Stamping Technology
2010 -06
Catalog
Deformation behavior of high elastic state PMMA under hot compression CAO Hong-shen1,CHEN Jin-zhou1,HAN Bang1,CHENG Pei-yuan2(1.School of Materials Science and Engineering,Zhengzhou University,Zhengzhou 450052,China;2.School of Materials Science and Engineering,Wuhan University of Technology,Wuhan 430070,China)
Application research on non-quenched and tempered steel for automotive forging of crankshaft and connecting rod MIU Tao-sheng1,JIANG Peng2(1.Shanghai Aichi Forging Co.,Ltd.,Shanghai 200433,China;2.Beijing Research Institute of Mechanical and Electrical Technology,Beijing 100083,China)
Technology improvement on forging and heat treatment of large gear blank ZHANG Yi-feng1,WANG Lei-gang1,WU Jun-san2,ZHOU Yun-he2,HU Zhen-qi2(1.School of Materials Science and Technology,Jiangsu University,Zhenjiang 212013,China;2.Zhangjiagang Hailu Annular Forgings Co.,Ltd.,Zhangjiagang 215600,China)
Research on hot-die forging technology for titanium alloy diaphragm forging LI Liang,LIU Xi-lin(Luoyang Ship Material Research Institute,Luoyang 471039,China)
Macrostructure defect analysis of GH4169 alloy ring forging LIU Hai-lan1,WANG Jian-guo2,WEI Zhi-jian1,WU Yong-an3,ZHANG Hua1(1.Guizhou Anda Aviation Forging Co.,Ltd.,Anshun 561005,China;2.Western Superconducting Technologies Co.,Ltd.,Xi'an 710018,China;3.Guizhou Aviation Technical Development Co.,Ltd.,Guiyang 550081,China)
Multiple-target optimization design of pre-forging for gear blank using back propagation neural network and genetic algorithm ZHANG Ming-yue1,WANG Xin-yun1,XIA Ju-chen1,JI Gang2(1.State Key Lab of Material Processing and Die and Mould Technology,Huazhong University of Science and Technology,Wuhan 430074,China;2.Dong Feng Forging Ltd.,Shiyan 442012,China)
Study on multi-step deep stamping technique of rectangular box based on numerical simulation BAI Ying1,WANG Qian1,CAO Feng1,CHEN Lei2(1.No.24 Sheet Metal Factory,Xi'an Aircraft International Corporation,Xi'an 710089,China2.Department of Mechanical Engineering,Jiangxi Blue Sky University,Nanchang 330098,China)
Study and exploitation of fast analysis system based on Pro/E for metal blank unfolding HAO Ming,LIU Yu-qi,ZHANG Zhi-bing,ZHONG Wen,WANG Wei(State Key Laboratory of Material Processing and Die Mould Technology,Huazhong University of Science and Technology,Wuhan 430074,China)
Research on incremental forming path of hemispherical workpiece SHEN Li-ping1,GAO Jin-zhang1,JIANG Song1,JIA Li-li2(1.Jiangsu Key Laboratory of Advanced Metallic Materials,School of Materials Science and Engineering,Southeast University,Nanjing 211189,China;2.Nanjing Communications Institute of Technology,Nanjing 211188,China)
Strain-increment neutral layer and it's locating of wide sheet plastic bending WU Yi-hua1,PENG Yan-rong2,HU Cheng-wu1,WEI Jun-chao3(1.Mechanical Engineering College,Hunan University of Technology,Zhuzhou 412003,China;2.Mechanical Engineering College,Xiangtan University,Xiangtan 411105,China;3.Material Molding and Control Engineering Department,Mechanical Engineering College,Hunan University of Technology,Zhuzhou 412003,China)
Study on bottom compression-drawing of boss deforming on plate LIN Qi-quan,ZHANG Xue-bing,WANG Zhen-qiu(College of Mechanical Engineering,Xiangtan University,Xiangtan 411105,China)
Study on blank forming synchronous simulation technology based on "Publication" of CATIA JIANG Liang,LIU Yu-qi,ZHANG Zhi-bing,DU Ting(State Key Laboratory of Material Processing and Die Mould Technology,Huazhong University ofScience and Technology,Wuhan 430074,China)
Experimental study on determinating forming limit diagram of sheet metal with cupping test method LI Wei-feng1,2,QIAO Ming-jie1(1.Xi'an Aircraft International Corporation,Xi'an 710089,China;2.Beijing University of Aeronautics & Astronautics,Beijing 100191,China)
Analysis and parameter optimization of magnetron exhaust pipe cold forming by extrusion process CHAI Rong-xia1,GUO Cheng1,QIN Bo-qi1,ZHANG Li-yu2(1.School of Mechanical Engineering,Xi'an Jiaotong University,Xi'an 710049,China;2.Taicang Jiuxin Precision Molding Co.,Ltd.,Taicang 215400,China)
Finite element modal analysis of 125 MN high speed forging hydraulic press body WANG Li-wei,XIE Wen-ke,XUE Feng(Technology Center,Taiyuan Heavy Industry Co.,Ltd.,Taiyuan 030024,China)
Structural optimization design for forging machine bed based on finite element method ZHANG Ting(School of Mechanical Engineering,Nanjing Institute of Technology,Nanjing 211167,China)
Simulation and research on electro-hydraulic proportional position control system of 30MN hydraulic straightening machine YU Jin1,ZHANG Ya-nan1,QIAO Zheng-ming2(1.College of Mechanical Engineering,Chongqing University,Chongqing 400044,China;2.AIGERUN CNC Machine Manufacturing Co.,Ltd.,Chongqing 402040,China)
Research on frame improved performance after pouring concrete into testing press machine crossbeam HE Wei,WANG Shao-hua,LIU Yue-bing,WANG Guang-chao,LIU Xin-ming(Institute of Mechanical Engineering,Southwest Jiaotong University,Chengdu 610031,China)
Research on high speed stamping die precision-oriented machine CHEN Huai-min(School of Mechanical Engineering,Jimei University,Xiamen 361021,China)
Research on divided flow of spiral bevel gear open-die forging FENG Wen-jie1,2,CHEN Ying-ying2,YANG Tao 2(1.Key Laboratory of Manufacture and Test Techniques for Automobile Parts,Ministry of Education,Chongqing University of Technology,Chongqing 400054,China;2.Automobile College,Chongqing University of Technology,Chongqing 400054,China)
Design of progressive die for stamping smart card plate based on Pro/E WANG Zhe-ying,WANG Ke,JIANG Jie(School of Mechanical Engineering,Shenyang University of Technology,Shenyang 110178,China)
Study on multi-functional protective coating appliciation for hot stamping of ultra-high strength steel FAN Guang-hong,REN Ming-wei,ZHOU Yong-song(State Key Laboratory for Advanced Forming Technology & Equipment,Advanced Manufacture Technology Center,China Academy of Machinery Sciencie &Technology,Beijing 100083,China)
Study on test method of K_(IC) value for high strength aluminum alloy forging PENG Fu-hua1,CHEN Bo2,LI Fu-guo2,LI Jiang2,GU Wei1(1.Equipment Manufacturing Division,Chengdu Aircraft Industry(Group) Limited Company,Chengdu 610092,China;2.School of Materials Science and Engineering,Northwestern Polytechnical University,Xi'an 710072,China)
Microstructure and properties of cold rolled Cu_(88)Fe_(12) alloys ZHOU Zhi-ming1,CAO Min-min1,TANG Li-wen1,LIU Chun1,WANG Ya-ping2(1.Schcool of Material Science and Engineering,Chongqing University of Technology,Chongqing 400054,China;2.Schcool of Science,Xi'an Jiaotong University,Xi'an 710049,China)
Hot deformation characteristics of Ti-46.5Al-2.5V-1.0Cr-0.3Ni alloy using processing maps SI Jia-yong1,GAO Fan2,ZHANG Ji2(1.Institute of Processing Technologies of Materials,Central South University of Forestry & Technology, Changsha 410004,China;2.High Temperature Material Research Division,Central Iron and Steel Research Institute,Beijing 100081,China)
Investigation on hot deformation behavior of as-casted TB6 titanium alloy in β phase field QIU Wei1,LU Shi-qiang1,OUYANG De-lai1,HUANG Xu2,LEI Li-ming2(1.School of Material Science and Engineering,Nanchang Hangkong University,Nanchang 330063,China;2.Institute of Aeronautical Materials,Beijing 100095,China)
Application of unified strength theory in design of prestressed combination die AO Wen-gang,WANG Xin(College of Mechanical Engineering,Chongqing Business and Technology University,Chongqing 400067,China)
Applications of mesh reconstruction technology in FEM simulation of porthole die extrusion for hollow Al-alloy profile HUANG Dong-nan1,2,ZHANG Zhi-hao1,LI Jing-yuan1,XIE Jian-xin1(1.Institute for Advanced Materials and Technology,University of Science and Technology Beijing,Beijing 100083,China;2.School of Materials Science and Engineering,Inner Mongolia University of Technology,Hohhot 010051,China)
Numerical simulation of wall thickness change in tube bending XU Xiao-bing1,GUAN Qiang2(1.School of Mechanical Engineering,Yangtze University,Jingzhou 434023,China;2.SJ Petroleum Machinery Company of Jianghan Petroleum Administration,SINOPEC,Jingzhou 434024,China)
FEM simulation analysis of H-beam during rolling process ZHAO Yan1,SUN Hui-zhao1,WANG Bo2,WU Yun1,CHEN Hao-wei1(1.Technical Center,Laiwu Steel Group,Ltd.,Laiwu 271104,China;2.Locomotive Depot of Transportation Department,Laiwu Steel Group,Ltd.,Laiwu 271104,China)
Forming process and optimization of the motorcycle tank's shell based on digital simulation technique ZHANG Hua(Fujian Polytechnic of Information Technology,Fuzhou 350003,China)
Research on OPT theory application in production planning of forging enterprise LIU Lei1,ZUO Xiao-ming1,TONG Yi-fei2(1.School of Mechanical Engineering,Huaiyin Institute of Technology,Huaian 223003,China;2.School of Mechanical Engineering,Nanjing University of Science & Technology,Nanjing 210094,China)
Clinch technology and application ZHANG Zhen,WANG Li-ying(Vehicle Manufacturing Engineering,Shanghai General Motor Limited Company,Shanghai 201201,China)
Build-up welding technology of cutting edge in automobile punch dies LU Yuan-san(Department of Mechanical Engineering,Hengyang Finance Economics and Industry Vocational College,Hengyang 421008,China)
Research on thermoforming technique for producing soleplate used in special automobile CHEN Gang1,LI Ke-feng2,DU Zhi-ming1,LIU Jun1,CHENG Yuan-sheng1,MA Hong-yong1(1.School of Material Science and Engineering,Harbin Institute of Technology,Harbin 150001,China;2.Harbin North Vehicle Research Institute Limit Corporation,Harbin 150056,China)
Investigation of precision die forging process for fork parts used in automotive propeller shaft JI Dong-sheng,XIA Ju-chen,ZHU Huai-shen,HU Guo-an(State Key Lab of Material processing and Die and Mould Technology,Huazhong University of Science and Technology,Wuhan 430074,China)
Development of trimming line unfolding and flanging forming simulation system based on Pro/E platform WANG Wei,LIU Yu-qi,ZHONG Wen,HAO Ming,ZHANG Zhi-bing(State Key Laboratory of Material Processing and Die and Mould Technology,Huazhong University of Science and Technology,Wuhan 430074,China)
Research on foam EPC optimization of NC tool path based on UG LV Zhu-qing,WANG Hua-chang,LI Zhi-gang(State Key Lab of Material Processing and Die and Mould Technology,Huazhong University of Science and Technology,Wuhan 430074,China)
2010 Issues:  [01] [02] [03] [04] [05] [06]
More Issues:   [1993]   [1994]   [1995]   [1996]   [1997]   [1998]   [1999]   [2000]   [2001]   [2002]   [2003]   [2004]   [2005]   [2006]   [2007]   [2008]   [2009]   [2011]   [2012]   [2013]   [2014]   [2015]   [2016]   [2017]   [2018]
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved