  |
|
 |
|
 |
| Forging & Stamping Technology |
|
| FQ: 月刊 |
| AD of Publication: 北京市 |
| Lanuage: 中文; |
| ISSN: 1000-3940 |
| CN: 11-1942/TG |
| YP: 1958 |
|
Url: 北京机电研究所;中国机械工程学会塑性工程分会 |
|
|
 |
|
 |
Recommended Journals |
|
|
|
 |
|
|
|
 |
|
 |
 |
Forging & Stamping Technology |
 |
 |
| 2013
-01 |
|
Catalog
|
 |
Manufacturing process precision assurance for combined type of metal blower fan |
|
XU Li-hua,YIN Ming(Precision Manufacture Engineering Department,Suzhou Institute of Industrial Technology,Suzhou 215104,China) | |
Drawing die design of automobile floor lateral beam based on CAD/CAE |
|
ZHOU Xiong-xin,OU Di-sheng(Engineering Training Center,Guangxi University of Technology,Liuzhou 545006,China) | |
Quantitative analysis on hot compression test erro and software development for correction |
|
LIU Xiao-fei,ZHANG Yan-shu(Advanced Manufacture Technology Center China Academy of Machinery Science & Technology,Beijing 100083,China) | |
Development of manipulator for stamping automatic feeding in the battery cover based on PLC |
|
WANG Shao-chun,FU Xiu-yun,WANG Xiao-xiang,DU Ping,LIU Ji-cheng,DENG Da-wei (School of Mechanical and Electrical Engineering,Harbin Institute of Technology,Harbin 150001,China) | |
Science technology value and engineering application of super heavy hydraulic cylinder |
|
YAN Yong-nian1,2,JING Hong1,YU Xin-lu2,ZHANG Ding-jun1,ZHANG Ren-ji2,LU Qing-ping2,CHEN Zhen-dong1(1.Kunshan Yongnian Advanced Manufacturing Technologies Co.,Ltd.,Kunshan 215347,China; 2.Tsinghua University Assiociation of Senior Scientists and Technicians,Beijing 100084,China) | |
Study on close die forging process of long rod differential case |
|
LI De-chao1,3,CHE Qi-nan2,CHEN Hai-peng2,HAN Hai-he2,YANG Lan2,LIN Hai2(1.Material and Metallurgy School,Inner Mongolia University of Science and Technology,Baotou 014010,China; 2.Inner Mongolia First Machinery Group Corporation,Baotou 014032,China; 3.School of Materials Science and Engineering,Inner Mongolia University of Technology,Hohhot 010051,China) | |
Research on forging method of marine long-shaft heaving forging |
|
XIA Qin-xiang1,XIANG Ke1,ZHAO Xue-zhi1,LI Yi-zhen2(1.School of Mechanical and Automotive Engineering,South China University of Technology,Guangzhou 510640,China; 2.Guangzhou Shipyard Co.,Ltd.,Guangzhou 510382,China) | |
Heat treatment process research on 0Cr13 ring forgings used in nuclear power turbines |
|
DAI Yu-tong1,QIAN Xi-gen2,PAN Zheng-hua1(1.Zhangjiagang Hailu Annular Forgings Co.,Ltd.,Zhangjiagang 215600,China; 2.School of Materials Science and Technology,Jiangsu University,Zhenjiang 212013,China) | |
Optimization and design on drawbead of multi-process management system based on incremental method |
|
YI Guo-feng1,2,LIU Yu-qi1,ZHANG Zhi-bing1,DU Ting1,SU Rui1(1.State Key Laboratory of Material Processing and Die & Mould Technology,Huazhong University of Science & Technology,Wuhan 430074,China; 2.School of Mechanical Engineering,Hubei University of Technology,Wuhan 430064,China) | |
Bending formability of aluminum alloy sheet |
|
CHEN Chao1,GUI Feng2,CHEN Ming-an2(1.Department of Mechanical Engineering,Hunan Industry Polytechnic,Changsha 410208,China; 2.School of Materials Science and Engineering,Central South University,Changsha 410083,China) | |
Optimized forming process for improving forming quality of outer transition sleeve |
|
YANG Hai-gang(International Business Division,Shenyang Liming Aero-Engine Group Corporation,Ltd.,Shenyang 110043,China) | |
Numerical simulation of high strength steel sheet metal forming in different strain paths |
|
QI Zhen-jie1,XIA Qin-xiang1,QI Chun-xiao1,QIU Zun-wen2(1.School of Mechanical & Automotive Engineering,South China University of Technology,Guangzhou 510640,China; 2.Guangdong Kelon Mould Co.,Ltd.,Foshan 528303,China) | |
Forming research on railway carriages small curved beam based on LS-DYNA finite element platform |
|
HE Ya-feng1,GAN Wei-min1,2(1.Department of Mechanics and Electronics,Changzhou Institute of Technology,Changzhou 213002,China; 2.Digital Electrochemical Machining Key Laboratory of Jiangsu Province,Changzhou 213002,China) | |
Study on influence factors of wall thinning ratio for bearing seat of supporting roller based on Dynaform |
|
CAO Zi-lin1,NIE Hui-hui2,CHI Cheng-zhong2,LIANG Wei2(1.Taiyuan Yilin Mechanical and Electrical Technology Co.,Ltd.,Taiyuan 030024,China; 2.School of Material Science and Engineering,Taiyuan University of Science and Technology,Taiyuan 030024,China) | |
Influence of auto sheet's thickness on measurement of frictional coefficient in draw bead region |
|
LI Chuan-hai(Planning Development Department,BaoSteel Co.,Ltd.,Shanghai 201900,China) | |
Failure analysis of extrusion cylinder for aluminum extrusion press |
|
WANG Ling-ling(Technology Center,Taiyuan Heavy Industry Co.,Ltd.,Taiyuan 030024,China) | |
Diameter calculation of billet before incremental rolling for spline shaft and finite element analysis |
|
LI Yong-yi,ZHAO Sheng-dun(School of Mechanical Engineering,Xi'an Jiaotong University,Xi'an 710049,China) | |
Study on achieving method for designing press driven by non-circular gears |
|
JIN Xu-xing(Department of Mechanical Engineering,Wuxi Institute of Technology,Wuxi 214121,China) | |
Influence of joint clearance on vibration of high-speed precision press |
|
WU Yang-yang,ZHAO Yu,WU Hong-tao,KE Zun-mang(College of Mechanical and Electrical Engineering,Nanjing University of Aeronautics and Astronautics,Nanjing 210016,China) | |
Mathematical model of bending process control of elliptic cyclic in a four-roller bending machine |
|
XU Zhao-jun,MA Chen-bo(College of Mechanical and Electronic Engineering,Nanjing Forestry University,Nanjing 210037,China) | |
Analysis of basic parameters and performance for pipe manufacture based on three-roll rolling machine |
|
ZHONG Ji-bin,ZHANG Ji-qing,SHU Hai-yan(China Offshore Oil Engineering Co.,Ltd.,Tianjin 300452,China) | |
Transmission mechanism and simulation analysis of new mechanical drawing press |
|
HE Yan-zhong,HUANG Jian-min(Precision Machine Tool Research Institute of Jangsu Yang Li Group,Yangzhou 225127,China) | |
High speed communication method between upper and lower control systems and its application on huge forging hydraulic press |
|
SHU Zhao-qiang,TAN Jian-ping,CHEN Hui(School of Mechanical and Electrical Engineering,Central South University,Changsha 410083,China) | |
Die design of hot stamping and superplastic inflatable compound forming |
|
SUN Meng-ying,WU Xiao-wei,WANG Yong,LIANG Hai-jian(Beijing Research Institute of Mechanical & Electrical Technology,Beijing 100083,China) | |
Support frame progressive die design for two workpiece with one die without waste material |
|
KUANG Yu-hua (Nanjing Institute of Industry Technology,School of Mechanical Engineering,Nanjing 210046,China) | |
Design of multi-position progressive die for support frame |
|
HE Min-hong,WANG Shu-xun(Department of Mechanical and Electrical Technology,Jiangmen Polytechnic College,Jiangmen 529090,China) | |
Double sheet detection system of stamping feed based on ultrasonic technology |
|
WANG Guo-dong,ZHONG Pei-si,DING Shu-hui,TANG Ming-ming,LIU Mei(Advanced Manufacturing Technology Center,Shandong University of Science and Technology,Qingdao 266590,China) | |
Prediction of limit drawing coefficient for cylinder based on plastic strain ratio |
|
NIE Hui-hui,CHI Cheng-zhong,HUANG Li-li,WANG Bao,LI Hong-li,LIANG-Wei(School of Material Science and Engineering,Taiyuan University of Science and Techndogy,Taiyuan 030024,China) | |
Deep drawing process simulation of pure aluminum L2 considering intrinsic length |
|
WANG Rui-ting,LI Fu-guo,CHEN Bo,XUE Feng-mei,LI Jiang(School of Materials Science and Engineering,State Key Laboratory on Solidification,Northwestern Polytechnical University, Xi'an 710072,China) | |
Simulation of multiple plastic deformation mechanism for isothermal forming of TC4 titanium alloys blade |
|
DONG Jun-zhe,LI Fu-guo,XIAO Mei-li,WANG Cheng-peng(State Key Laboratory of Solidification Processing,School of Materials Science and Engineering, Northwestern Polytechnical University,Xi'an 710072,China) | |
Billet shape research of open punching with aperture ratio from 2.50 to 3.00 |
|
ZHANG Ru-hua,XIONG Yong-yong,WANG Shi,SUN Xue-jiao,ZHU Yue-feng(School of Mechatronics Engineering,Nanchang University,Nanchang 330031,China) | |
Research on laws of extrusion blank forming for GH4169 superalloy blade |
|
QI Guang-xia1,XU Pei-pei1,SHI Li-kun2(1.College of Materials Science and Engineering,Shenyang Ligong University,Shenyang 110159,China; 2.Shenyang Liming Aero-Engine Group Corporation,Shenyang 110043,China) | |
Research on forming technology of medium carbon alloy steel parts |
|
HAN Lai-fu,YIN Xiao-ping,MA Tao,FAN You-gen,ZHAO Hong-xun(No.6 Branch,Inner Mongolia First Machinery Group Corporation,Baotou 014030,China) | |
Research necessity and technical summary of machinery industry standard of CWR process specification for rough gear shaft |
|
ZHANG Jun-gai1,ZHANG Kang-sheng2,LI Yu1,LIAO Xing3(1.Hebei Dongan Precision Manufacturing Co.,Ltd.,Shijiazhuang 050000,China; 2.School of Mechanical Engineering,University of Science and Technology Beijing,Beijing 100083,China; 3.Beijing Research Institute of Mechanical & Electrical Technology,Beijing 100083,China) | |
Forming process design and numerical simulation of helix drilling joint |
|
FENG Wen-jie1,2,ZHU Yu2,CHEN Ying-ying2,LIANG Qiang2(1.Key Laboratory of Manufacture and Test Techniques for Automobile Parts,Ministry of Education, Chongqing University of Technology,Chongqing 400054,China; 2.Automobile College,Chongqing University of Technology,Chongqing 400054,China) | |
Study of forming process optimization for involute gear shaft wedge cross rolling |
|
XU Cai-ling1,2,WANG Guo-dong1(1.Mechanical & Electrical Engineering College,Taizhou Vocational &Technical College,Taizhou 318000,China; 2.Mechanical Engineering College,Zhejiang University of Technology,Hangzhou 310014,China) | |
3D rolling numerical simulation of circle section being rolled to flat based on MSC.Superform |
|
HAN Xiao-feng1,GUO Cheng2,XING Guang-han2,ZHANG Xin-gong2(1.Department of Material Engineering,Shaanxi Polytechnic Institute,Xianyang 712000,China; 2.Mould & Plastic Processing Research Institute,Xi'an Jiaotong University,Xi'an 710049,China) | |
Dynamics simulation study on blade rolling process |
|
MAO Jun1,ZHANG Yu1,LI Shen-liang2,CHEN Hong-yue1(1.School of Mechanical Engineering,Liaoning Technical University,Fuxin 123000,China; 2.Coal Mining & Designing Branch,China Coal Research Institute,Beijing 100013,China) | |
Simulation research on pressure relief loop for large die-forging hydraulic press |
|
ZHAN Li-hua,SHEN Wen-qi,CHEN Min,HUANG Ming-hui(State Key Laboratory of High Performance and Complex Manufacturing,Central South University,Changsha 410083,China) | |
Application of three-roll centering device in seamless steel tube punch |
|
ZHANG Ying-chun1,2,NING Yan-ping3,LUO Hui2(1.Department of Mechanical Engineering,Hengyang Finance Economics and Industry Vocational College, Hengyang 421008,China;2.Technical Center,Hengyang Valin Steel Tube Co.,Ltd.,Hengyang 421001,China; 3.Niangxi Middle School,Xinshao 422900,China) | |
Finite element analysis of 80 MN inclined double-column rapid forging hydraulic press |
|
YAN Hong-hong1,LI Yong-tang1,LIU Xing1,ZHANG Yi-gong2(1.School of Materials Science and Engineering,Taiyuan University of Science and Technology,Taiyuan 030024,China; 2.Technology Center,Taiyuan Heavy Machinery Group Co.,Ltd.,Taiyuan 030024,China) |
|
