Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
Full-Text Search:
Special Casting & Nonferrous Alloys
FQ: 月刊
AD of Publication: 湖北省武汉市
Lanuage: 中文;
ISSN: 1001-2249
CN: 42-1148/TG
YP: 1980
Url: 中国机械工程学会铸造分会
Recommended Journals
Special Casting & Nonferrous Alloys
2012 -01
Catalog
Development of Die-Casting Die CAD Parting Line System Based On UG Gong Xuedan1,2,Liao Dunming1,Zhou Jianxin1(1.State Key Laboratory of Materials Processing and Die&Mould Technology,Huazhong University of Science and Technology,2.School of Mechanical Engineering,Hubei poytechnical University)
Production of Double-barreled Tank of Automobile Air Conditioner by Titling Gravity Casting Li Yunxiang1,2,Wu Shusen1,Su Weiqiang2,Sun Naiyi2,Sun Fan2(1.State Key Labortary of Materials Processing and Die &Mould Technology,Huazhong University of Science and Technology;2.AVIC Special Vehicle Research Institute)
Detection Method to the First Bubble Based on Self-Adaptive Background Forecast in Magnesium Alloy Melt Liu Tengfei,Xu Sixiang,Feng Zaidong,Sun Jie(Mechanical Engineering Institute,Anhui University of Technology)
Modeling of the Effects of Processing Parameters on Lotus-Type Porous Mg Liu Runfa,Liu Yuan,Zhang Huawei,Li Yanxiang(Key Laboratory for Advanced Materials Processing Technology,Ministry of Education,Department of Mechanical Engineering,Tsinghua University)
Preparation of Nano-TiC by Ball-milling Technique and Its Formation Mechanism Zhang Lina(College of Applied Science,Jiangxi University of Science and Technology)
Constitutive Model of ZL201 Alloys in Semi-Solid Forming Lu Guimin1,Shang Shuzhen1,Zhang Wanning2,Wang Jiaojiao1,Tang Xiaoling1(1.School of Mechanical and Power Engineering,East China University of Science and Technology;2.Shenyang International Engineering Consulting Center)
Effect of Electromagnetic Stirring on As-cast Microstructure of Superalloy GH3030 Zhan Guofeng,Wang Engang,Jiang En,He Jicheng(Key Laboratory for Electromagnetic Processing of Materials,Education of Ministry,Northeastern University)
Microstructure of Multi-element Aluminum Bronze Coatings Prepared by Supersonic Plasma Spraying Wang Zhiping,Liu Junzhao,Lu Yang,Yang Xiaotian(State Key Laboratory of Gansu Advanced Non-ferrous Materials,Lanzhou University of Technology)
Mechanical Properties of Cu-based Bulk Amorphous Alloys Yang Yingjun,Shan Shusen,Sun Jiku,Liu Dongyu(Department of Aviation Mechanical Engineering,Aviation University of Air Force)
Effects of Extrusion Ratio on Microstructure and Properties of Hot Extruded AZ80 Magnesium Alloy Liang Haicheng1,3,Feng Lijun2,Cui Jianzhong1,Zhang Zhiqiang1,Zhao Genfa3(1.Key Laboratory of Electromagnetic Processing of Materials,Ministry of Education Northeastern University;2.Technology Section,Qiqihar Huaan Special Container Co.,Ltd;3.School of Materials Science and Engineering,Shenyang Ligong University)
Effects of Co on Microstructure and Mechanical Properties of Al-20Si-2Cu-1Ni-0.5Mn Alloy Sha Meng,Wu Shusen,Wang Xingtao(State Key Laboratory of Material Processing and Die & Mould Technology,Huazhong University of Science and Technology)
Effect of Fe Content on Mechanical Properties of High Purity Al-Si Alloy Zhou Yongjiang,Zhang Zhe,Xiong Yancai,Hong Runzhou(Beijing Institute of Aeronautical Materials)
Industrial Applications of the Squeeze Casting for Iron and Steel Parts Xing Shuming,Bao Peiwei,Yu Dong,Wang Shuo(School of Mechanical,Electronic and Control Engineering,Beijing Jiaotong University,)
Numerical Simulation of Suction Casting Titanium Aluminum Connecting Rod Luo Liangshun,Feng Ming,Su Yanqing,Li Xinzhong,Guo Jingjie,Fu Hengzhi(School of Materials Science and Engineering,Harbin Institute of Technology)
Temperature Measurement and Microstructure Characteristics in Squeeze Casting Aluminum Alloy Parts Li Yanda1,Han Zhiqiang1,Huang Xiaoran1,Wan Li2,Liu Baicheng1,3(1.Key Laboratory for Advanced Materials Processing Technology,Ministry of Education,Department of Mechanical Engineering,Tsinghua University;2.State Key Laboratory of Materials Processing and Die & Mold Technology,Huazhong University of Science and Technology;3.State Key Laboratory of Automotive Safety and Energy,Department of Automotive Engineering,Tsinghua University)
Impeller Die Casting Mould with Pre-returned Ejector Sleeve and Swing Block for Push-out Li Shuyu1,Tian Fuxiang2(1.School of Automobile and Traffic,Qingdao Technological University;2.School of Mechanical Engineering,Qingdao Technological University)
Defect Prediction Analysis of Squeeze Casting Magnesium Alloy Automobile Control Arm Cao Hanxue1,2,Zhao Donglin1,Hao Tingting1,Liu Yu1(1.College of Materials Science and Engineering,Chongqing University;2.National Engineering Research Center for Magnesium Alloy Materials)
Die Casting Design of Al Alloy Rear Sub-frame on the Vehicle Chassis Ma Guangxing1,Wan Li2,3,Liang Zhenjin1,Liu Houyao2,Wu Zhanfang2,Wu Shusen3,Zhao Yuchao2,Yang Linfang2(1.Guangzhou Die and Mould Manufacturing Co.Ltd;2.Guangdong Hongtai Technology(holdings) Co.Ltd;3.State Key Laboratory of Materials Processing and Die & Mold Technology,Huazhong University of Science and Technology)
Formability and Mechanical Properties of the ZA27 Alloy Worm Gear Blanks Cui Lianhe(Department of Mechanical and Electronic Engineering,Jiangyin Polytechnic College)
Investment Casting TiAl Alloy Blades Zhao Peng,Nan Hai,Huang Dong(Center of Cast Titannium Alloy R&D,AVIC Beijing Institute of Aeronautical Materials)
Challenge and Future of Investment Casting Trade Lü Zhigang1,Zhou Zeheng2(1.Department of Mechanical Engineering,Key Laboratory for Advanced Materials Processing Technology,Minisity of Education;Tsinghua University,2.Branch of Investment Casting,Chinese Foundry Association)
Measures for Eliminating Cold Shut and Inclusion Defect in Grate of Incinerator by Lost Form Casting Process Zhang Wei,Quan Xiaobing,Cheng Qiankun(ChangZhou BaoLing Heavy&Industrial Machiney Co.Ltd)
Effects of High Quality Al-5Ti-1B Alloy wire on Grain Refinement of Pure Al Zhang Caijin1,2,Zheng Kaihong2,Wang Shuncheng2,Qi Wenjun2,Che Xiaozhou1(1.School of Materials Science and Engineering,South China University of Technology;2 Institute of Materials Processing,Guangdong General Research Institute of Industrial Technology)
Effect of Mould Temperature and Pouring Temperature on the Hot Tearing and Fluidity of AZ91D Magnesium Alloy Huang Hao,Fu Penghuai,Peng Liming,Jiang Haiyan,Wang Yingxin,Zhai Chunquan(National Engineering Research Center of Light Alloy Net Forming,Shanghai Jiaotong University)
Microstructure and Tensile Properties of Al-Mg-Mn Alloy Sun Jingwang1,2,Wang Qudong1,2,Ding Wenjiang1,2(1.National Engineering Research Center of Light Alloy Net Forming,Shanghai Jiaotong University;2.State Key Laboratory of Metal Matrix Composites,Shanghai Jiaotong University)
Research and Development of Electrode Used for Pulse Current on Tundish Yuan Shouqian1,Yao Chenggong1,Wang Chao1,Yang Ladao2,Zhang Xifeng2,Li Duhong3(1.Metallurgical Engineering School,Xi'an University of Architecture and Technology ;2.China National Heavy Machinery Research Institute Co.,Ltd;3.Shanxi Longmen Iron & Steel Group Co.,Ltd)
Study on Optimal Location Problem of Temperature Sensor in Copper Refining Furnace Dai Huaping,Zhu Lingping(State Key Laboratory of Industrial Control Technology,Department of Control Science and Engineering Zhejiang University)
2012 Issues:  [01] [02] [03] [04] [05] [06] [07] [08] [09] [10] [11] [12]
More Issues:   [1994]   [1995]   [1996]   [1997]   [1998]   [1999]   [2000]   [2001]   [2002]   [2003]   [2004]   [2005]   [2006]   [2007]   [2008]   [2009]   [2010]   [2011]   [2013]   [2014]   [2015]   [2016]   [2017]   [2018]
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved