Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
Full-Text Search:
Modular Machine Tool & Automatic Manufacturing Technique
FQ: 月刊
AD of Publication: 辽宁省大连市
Lanuage: 中文;
ISSN: 1001-2265
CN: 21-1132/TG
YP: 1959
Url: 大连组合机床研究所:中国机械工程学会生产工程分会
Recommended Journals
Modular Machine Tool & Automatic Manufacturing Technique
2011 -10
Catalog
Petri Net and GA Based Approach for Dynamic Multi-objective JSP TAO Ze1,LI Xiao-jun2,LIU Xiao-xia3(1.Department of Mechanical Engineering,Shenyang Ligong University,Shenyang 110159,China;2.School of Software,Northeastern University,Shenyang 110004,China)
Improved Design of the key components of Drill Gyrator Based on Optimization Method WANG Yong1,SHEN Wei1,XU Hong-xiang2,ZHENG Long2(1.Hefei University of Technology,Hefei 230009,China;2.Drilling Equipment of Hangzhou Xianglong Co.Ltd.,Tonglu 311504,China)
Quality Factor Coupling Model Based on SOV in Machining Assembly Process LIU Ming-zhou,LING Xian-jiao,JIANG Zeng-qiang,HU Jing,GE Mao-gen,ZHANG Ming-xin(School of Machinery and Automobile Engineering,Hefei University of Technology,Hefei 230009,China)
Thermal Error Modeling Based on Optimum Selection of Time Series Models ZHANG Kun,YAO Xiao-dong,ZHANG Yi,YANG Jian-guo(School of Mechanical Engineering,Shanghai Jiao Tong University,Shanghai 200240,China)
Nonlinear Dynamics Stability Analysis of Cutting a Slender Shaft CONG Chun-xiao,LIU Heng,LU Kai-bo,JING Min-qing(Institute of Mechatronics and Information Systems,Xi'an Jiaotong University,Xi'an 710049,China)
The FEM and Optimize of the NC Boring and Milling Machine Spindle Box of TK6920 ZHANG Zhong-mang1,XIA Lian1,JIANG Qin-hu1,PAN Kang-jian2,FENG Yun2(1.School of Machinery and Automobile Engineering,Hefei University of Technology,CIMS institute,Hefei 230009,China;2.Wuhu Hengsheng Heavy Machine Tool Co.,LTD.Wuhu Anhui 241000,China)
The Reliability Evaluation of NC System Based on Markov Chain Monte Carlo Method LI Bin-quan,DAI Yi(School of Mechanical Engineering,Tianjin University of Technology and Education,Tianjin 300222,China)
Modular Development of Shearing Machine NC System Based on ARM LI Ke1,TANG Xiao-qi2(1.Yantai project professional technology institute,Shandong Yantai 264006,China;2.SchoolofMechanical ScienceSLEngineering of HUST,Hubei Wuhan 430074,China)
Measurement and Evaluation Technology of Plane Profile Error Based CMM LU Tan1,GAO Lei1,AN Tao2,GUI Gui-sheng1(1.School of Machinery and Automobile Engineering,Hefei university of technology,Hefei 230009,China;2.Wheel and Type Plant of Maanshan Iron & Steel Co.Ltd.,Maanshan Anhui 243021,China)
Controlling System Optimization Design of Small Plasma Cutting Machine ZHANG Hong-hai,ZHU Hua,WANG Bo(China University of Mining and Technology,Electrical and Mechanical College,Xuzhou Jiangsu 221116,China)
The Cylinder Base Three Four Locations Fine Bore the Mill EndSurface Aggregate Machine-tool Design FENG Jin-yun(Nanjing Juxing Mechanical Equipment Co,.Ltd R&d Dept.,Nanjing 211100,China)
The Design of Programmable Control Pneumatic Fixture Based on theNC Machining Process Integrated Requirements ZHANG Guo-zheng1,2,HAN Jiang1,LU Ai-ming1(1.The Department of Mechanical and Automotive Engineering,Hefei University of Technology,Hefei 230009,China;2.Anhui Technical College of Mechanical & Electrical Engineering,Wuhu Anhui 241000,China)
Study on Macro-morphology of Hard whirling Chips with PCBN Cutting ToolsCoated with Chromium Aluminum Nitride ZHU Hong-yu 1,2,LI Ying 1(1.College of Mechanical Engineering,Nanjing University of Science & Technology,Nanjing 210094,China;2.Nanjing College of Chemical Technology,Nanjing 210048,China)
Machining Simulation of NC Gear Profile Grinding Based on VERICUT ZHANG Hu1,HUANG Xiao-diao1,LIU Xing-hui2,FANG Cheng-gang1(1.School of Mechanical and Power Engineering,Nanjing University of Technology,Nanjing 210009,China;2.Nanjing High-Speed & Accurate Gear Group Co.,Ltd,Nanjing 210012,China)
The Difficult Point Analysis of Spindle Machining Technology in NC Lathe LI Ying-hua(Technology equipment institute of DaLian Machine Tool Group,Dalian Liaoning 116620,China)
Design of Modular Machine Tool for Finish Milling Fix Surface of Front and Rear End GAO Gui-hua(Dalian Machine Tool Group Technical center Dalian,Dalian Liaoning 116620,China)
Thermal Error Compensation Modeling Based on Fuzzy C-means Clustering Algorithmand RBF Neural Network Modeling SU Tie-ming,YE San-pai,SUN Wei(School of Mechanical Engineering,Dalian University of Technology,Dalian Liaoning 116023,China)
Reliability Analysis of Failure Mode for Machining Center YANG Zhi-wei,REN Gong-chang,MENG Bo-min(Institute of Electrical and Mechanical Engineering,Shaanxi University of Science and Technology,Xi'an 710021,China)
Experiment and Finite Element Analysis on DynamicCharacteristics of the Linear Rolling Guide Pair LI Xiao-peng,NIE Wei,ZHAO Zhi-jie,WEN Bang-chun(School of Mechanical Engineering& Automation Northeastern University,Shenyang 110004,China)
The Study of Single Abrasive Grain Dynamics Model During Ultrasonic Honing Chatter LIU Meng,ZHU Xi-jing,YUAN Xiao-fei(Key Laboratory of Advanced Manufacturing Technology,North University of China,Taiyuan 030051,China)
Threshold Switch Filter Designing and its Realization in Image Denoising TAN Xiao-rong,YANG Bao-hai,ZHA Dai-feng(College of Electronic Engineering Jiujiang University,Jiujiang Jiangxi 332005,China)
Research on Real-time Control for Human-Computer InteractionNetwork System Based on PROFIBUS HAN Jiang,ZHANG Tao,XIA Lian,HAN Chun-ming,WANG Xiao-ming,HUANG Hai-jin(School of Machinery and Automobile Engineering,Hefei University of Technology,Hefei 230009,China)
Research on Adjusting Height System in NC Plasma Cutting MachineBased on Complex Genetic Algorithm ZHANG Wen-wu,CHENG Liang-lun,XUE Hang(Faculty of Automation,Guangdong University of Technology,Guangzhou 510006,China)
The Design of Central Air Conditioning Duct Cleaning Robot GONG Yu-bin1,CHEN Ji-wen2,FAN Wen-li2,CHANG Guo-lei1,QIU Dong1(1.Management Center,Shandong Academy of Information & Communication Technology,Jinan 250101,China;2.School of Mechanical and Electronic Engineering,Shandong Jianzhu University,Jinan 250101,China)
Entity Modeling and NC Milling for Conical Cam with Oscillating Follower on Pro/M ZHANG Jun,FU Zheng-fei,GAO Cheng-hui(School of Mechanical & Automotive Engineering,Xiangfan University,Xiangyan Hubei 441053,China)
Research on Vacuum Cluster Tools Robot Trajectory Planning ZOU Feng-shan1,2,QU Dao-kui1,3,XU Fang1,3(1.Shenyang Institute of Automation,Chinese Academy of Science,Shenyang 110016,China;2.Graduate School of Chinese Academy of Sciences,Beijing 100039,China)
Based on ADAMS the Roller Linear Guides Dynamic Simulation RONG Bai-song1,2,SONG Xian-chun1,JIANG Hong-kui1,TANG Wen-cheng1,LI Bao-min2,ZHU Ji-sheng2,WANG Zhi-min2,LI Hui2,DU Wei2(1.School of Mechatronics,Shandong Jianzhu University,Jinan 250101,China;2.Shandong Best Precision co.Ltd,Jining 272071,China)
The Method of Multiple Modulation Zoom Spectrum Analysis Based on Multiple AnalyticalBand-Pass Filter Applied to The Gear Fault Diagnosis SUN Wei,WANG Xi-yang,XU Ying-shuai(Nanchang Hangkong University,Nanchang 330063,China)
Study on Reverse Metod of Solid Molding for the Inner Helicoids in Helical Stator WANG Shu-qiang1,2,WANG Ke1,SUN Xing-wei1,LIU Xi-min2(1.Shenyang University of Technology,School of Mechanical Engineering,ShenYang 110870,China;2.Shenyang University of Chemical Technology,School of Mechanical Engineering,ShenYang 110142,China)
Implementation of Six-phase SVPWM with TMS320F28335 DSP PAN Hai-hong,FENG Hua,CHEN Lin,HUANG Hai-ming,HUANG Bing-qiong(College of Mechanical Engineering,Guangxi University,Nanning Guangxi 530004,China)
2011 Issues:  [01] [02] [03] [04] [05] [06] [07] [08] [09] [10] [11] [12]
More Issues:   [1996]   [1997]   [1998]   [1999]   [2000]   [2001]   [2002]   [2003]   [2004]   [2005]   [2006]   [2007]   [2008]   [2009]   [2010]   [2012]   [2013]   [2014]   [2015]   [2016]   [2017]   [2019]
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved