  |
|
 |
|
 |
| 矿物冶金与材料学报(英文版) |
|
| FQ: 月刊 |
| AD of Publication: 北京市 |
| Lanuage: 英文; |
| ISSN: 1001-053X |
| CN: 11-5787/TF |
| YP: 1994 |
|
Url: 北京科技大学 |
|
|
 |
|
 |
Recommended Journals |
|
|
|
 |
|
|
|
 |
| 2007
-01 |
|
Catalog
|
 |
GIS-based 3D limit equilibrium analysis for design optimization of a 600 m high slope in an open pit mine |
|
Meifeng Cai, Mowen Xie, and Chunlei Li Civil and Environment Engineering School, University of Science and Technology Beijing, Beijing 10083, China | |
Application of a microseismic monitoring system in deep mining |
|
Chengxiang Yang, Zhouquan Luo, Guobin Hu, and Xiaoming Liu School of Resources and Safety Engineering, Central South University, Changsha 410083, China | |
A new synthetic chelating collector for the flotation of oxidized-lead mineral |
|
Yongkai Zhu1,2), Chuanyao Sun2), and Weiguo Wu1,2) 1) Civil and Environmental Engineering School, University of Science and Technology Beijing, Beijing 100083, China 2) Beijing General Research Institute of Mining and Metallurgy, Beijing 100044, China | |
Thermodynamic calculations and experiments on inclusions to be nucleation sites for intragranular ferrite in Si-Mn-Ti deoxidized steel |
|
Xiaojun Zhuo1,2), Xinhua Wang1), Wanjun Wang1), and Lee Hae-Geon2) 1) Metallurgical and Ecological Engineering School, University of Science and Technology Beijing, Beijing 100083, China 2) Graduate Institute of Ferrous Technology, Pohang University of Science and Technology, Pohang 790-784, South Korea | |
Mathematical modeling of fluid flow, heat transfer and inclusion transport in a four strand tundish |
|
Yufeng Wang1), Guanghua Wen1), Ping Tang1), Mingmei Zhu1), Yuanqing Chen1), and Weizhao Song2) 1) College of Material Science and Engineering, Chongqing University, Chongqing 400044, China2) Technical Center, Xinjiang Bayi Iron and Steel Co., Ltd, Urumchi 830022, China | |
Improvement of fuel consumption and maintenance of heating furnaces using a modified heating pattern |
|
Hsun-Heng Tsai1) and Shiuh-Ming Chang2) 1) Department of Biomechatronics Engineering, Pintung University of Science and Technology, China Taipei 2) Department of Mechanical and Automation Engineering, Kao Yuan University, China Taipei | |
A numerical method for solving the boundary layer equations of laminar natural convention about a vertical plate |
|
Liancun Zheng1), Chen Liang1), and Xinxin Zhang2) 1) Applied Science School, University of Science and Technology Beijing, Beijing 100083, China 2) Mechanical Engineering School, University of Science and Technology Beijing, Beijing 100083, China | |
Characteristics of microstructural evolution during deformation-enhanced ferrite transformation in Nb-microalloyed HSLA steel |
|
Guoan Chen1), Wangyue Yang2), Shouzhen Guo1), and Zuqing Sun1) 1) State Key Laboratory for Advanced Metals and Materials, University of Science and Technology Beijing, Beijing 100083, China 2) Materials Science and Engineering School, University of Science and Technology Beijing, Beijing 100083, China | |
Optimized composition for bonding assistant coat in carbon steel sandwich panels |
|
Jing Liu and Jingtao Han Materials Science and Engineering School, University of Science and Technology Beijing, Beijing 100083, China | |
Effect of solid-solution temperature on the microstructure of Fe-Ni based high strength low thermal expansion (HSLTE) alloy |
|
Yifan Tu1,2), Jin Xu2), Jianfu Zhang2), Boping Zhang1), and Dongliang Zhao2) 1) Central Iron & Steel Research Institute, Beijing 100081, China 2) Materials Science and Engineering School, University of Science and Technology Beijing, Beijing 100083, China | |
Isothermal corrosion Fe_3Si alloy in liquid zinc |
|
Wenjun Wang, Junping Lin, Yanli Wang, and Guoliang Chen State Key Laboratory for Advanced Metals and Materials, University of Science and Technology Beijing, Beijing 100083, China | |
New method for the preparation of semi-solid AlSi7Mg alloy slurry |
|
Weimin Mao, Hai Lin, Yuelong Bai, and Songfu Gao Materials Science and Engineering School, University of Science and Technology Beijing, Beijing 100083, China | |
Simulation of the precipitation process of Ni_(75)Al_xV_(25-x) alloy sincorporated in the microelasticity field |
|
Yongsheng Li1), Zheng Chen1,2), Yungang Li1), Yanli Lu1), and Yongxin Wang1) 1) Materials Science and Engineering School, Northwestern Polytechnical University, Xi’an 710072, China 2) State Key Laboratory of Solidification Processing, Northwestern Polytechnical University, Xi’an 710072, China | |
Growth behavior of electroless copper on silicon substrate |
|
Shin-Shyan Wu1), Wei-Long Liu2), Ting-Kan Tsai2), Shu-Huei Hsieh2), and Wen-Jauh Chen3) 1) Institute of Electro-Optical and Materials Science, Formosa University, Yunlin, China Taipei 2) Department of Materials Science and Engineering, Formosa University, Yunlin, China Taipei 3) Graduate Institute of Materials Engineering, Pingtung University of Science and Technology, Pingtung, China Taipei | |
Preparation of nanometer yellow iron and its UV absorption capacity |
|
Chunbao Sun1), Beihai Zhou1), Nan Li1), and Ruiming Wang2) 1) Civil and Environment Engineering School, University of Science and Technology Beijing, Beijing 100083, China 2) Semiconductor Manufacture International Corporation (Tianjin), Tianjin 300380, China | |
Adsorption behavior of heavy metal ions by carbon nanotubes grown on microsized Al_2O_3 particles |
|
Shu-Huei Hsieh1) and Jao-Jia Horng2) 1) Department of Materials Science and Engineering, Formosa University, Yunlin, China Taipei 2) Department of Safety, Health and Environmental Engineering, Yunlin University of Science and Technology, Yunlin, China Taipei | |
Property of three-dimensional silica composites |
|
Guangyao Jia and Zhimeng Guo Materials Science and Engineering School, University of Science and Technology Beijing, Beijing 100083, China | |
Sintering behavior, microstructure and properties of TiC-FeCr hard alloy |
|
Farid Akhtar1,2), Shiju Guo1), Jawid Askari1), and Jianjun Tian1) 1) Materials Science and Engineering School, University of Science and Technology Beijing, Beijing 100083, China 2) Department of Metallurgical and Materials Engineering, University of Engineering and Technology, Lahore, Pakistan |
|
