Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
Full-Text Search:
Powder Metallurgy Technology
FQ: 双月
AD of Publication: 北京市
Lanuage: 中文;
ISSN: 1001-3784
CN: 11-1974/TF
YP: 1982
Url: 中国机械工程学会粉末冶金分会;中国金属学会粉末冶金分会;中国有色金属学会粉末冶金及金属陶瓷学术委员会
Recommended Journals
Powder Metallurgy Technology
2007 -01
Catalog
Research on preparation of nitrogen-contained stainless steels by high-energy ball milling and sintering Cui Dawei,Li Ke,Qu Xuanhui,Jia Chengchang (School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing 100083, China)
Microstructure and properties of Si、Al、K-doped molybdenum wire Gao Jiacheng1), Wang Yong1), Chen Gongming1), Li Weiqin2), Zhou Yonggui2) 1)(College of Materials Science and Engineering, Chongqing University, Chongqing 400030,China) 2)(Zigong Cemented Carbide Co,Zigong Sichuan 643011,China)
Influence of surface residual stress distribution on mechanical properties of cemented carbide treated by wet blasting Du Haiyan1),Yang Jing2),Sun Jing2),Zhao Keyuan3),Du Xiwen2) 1)(Analysis Center,Tianjin University,Tianjin 300072,China) 2)(School of Paterials Science and Engineeraing,Tianjin University,Tianjin 300072,China) 3)(Tianjin Podern Vocational and Technology School,Tianjin 300072,China)
Mechanical properties and microstructures of Al_2O_3/AlTiC/ZrO_2/diopside ceramic composite Liu Changxia1), Zhang Jianhua1), Zhang Xihua2), Sun Junlong1) 1)(Department of Mechanical Engineering, Shandong University, Ji'nan 250061,China) 2)(Department of Materials Science and Engineering, Shandong University, Ji'nan 250061, China)
Effect of mechanical alloying on the property of Mo-Cu alloy Zhou Xianliang, Rao Youhai, Hua Xiaozhen, Zhang Jianyun, Zou Aihua (Department of Material Engineering, Nanchang Institute of Aeronautical Technology, Nanchang 330034,China)
Effect of powder features on the magnetic properties of Sm_2(Co,Cu,Fe,Zr)_(17) Wang YanFang1), Bao ShengXiang1), Wang JingDong2),Tan Fuming2), Ma Lili1), Peng Jing1) 1)(School of Microelectronics and Solidelectronics, University of Electronics Science and Technology,Chengdu 610054,China) 2)(The Cop of Electronics and Technology of China, 9th research institute, Mianyang Sichuan 621000,China)
Study on sintering behaviors of warm compacted Fe-2Ni-2Cu-1Mo-1C material in die wall lubrication Xiao Zhiyu, Zhang Juhong, Wen Liping, Wu Yuanbiao, Li Yuanyuan (School of Mechanical Engineering, South China University of Technology, Guangzhou 510640,China)
Research on Fe-6.5%Si silicon steel produced by powder rolling technique Yuan Wenjie, Shen Qiang, Zhang Lianmeng (State Key Lab of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan 430070, China)
Microstructure study on in situ sintering synthesis of (Ti,V)C/Fe composites Gong Wei, Wang Yisan, Wang Jing (School of Manufacturing Science and Engineering, University of Sichuan, Chengdu 610065,China)
Preparation of aluminum flake pigments in aqueous media Chen Jiana1),Ye Hongqi1),Deng Sanmao2),Liu Hui1) 1)(Institude of Powder Technology,College of Chemistry and Chemical Engineering,Central South University, Changsha 410083,China) 2)(China Bekaert Steel Cord Limited Company,Jiangyin Jiangsu 214434,China)
Influences of pre-coating technique on interface of ceramic-lined composite pipes fabricated by the SHS process Cao Jinrong, Zhao Zhongmin,Zhang Long (Ordance Engeering College, Shijiazhuang 050003, China)
Design of automatic die carrier for assembling the bushings into guide sleeve Mu Hongbiao1),Hu Zigang1),Shun Yingbo2) 1)(Jiashan Zhejiang 314115,China) 2)(No 242 geological team of nuclear industry department,Xingcheng Liaoning 125100,China)
Progress and prospect on the gas atomization Ouyang Hongwu,Chen Xin,Yu Wentao,Huang Baiyun (State key lab for Powder Metallurgy, Central Southern University, Changsha 410083,China)
Research and development status of rubber-plastic magnets Xu Zhaohua1),Sun Ning1),2),Tong Zhen2) 1)(Department of Chemical & Environmental Engineering, Wuyi University,Jiangmen Guangdong 529020,China) 2)(College of Materials Science and Engineering,South China University of Technology,Guangzhou 510640, China)
Optimization of secondary operations according to geometry of component made of low alloyed sintered steel Koki Kanno1),Yoshinobu Takeda1),Anders Bergmark2),Bjrn Lindqvist2), Yoshihisa Ueda3), and Kiichi Kanda4) 1)(Hgans Japan K.K.,4-2-19 Akasaka,Pinato-Ku,Tokyo 107-0052) 2)(Hgans AB,s-263 83 Hgans,Sweden) 3)(Fine Sinter Co.,LTD.,5-1 Kitsunezuka Kurisuno Yamashina-Ku,Kyoto 607-8201) 4)(Kanto Yakin Kogyo Co.,LTD.,3-20-48 Shinomiya,Hiratsuka 254-0014)
2007 Issues:  [01] [02] [03] [04] [05] [06]
More Issues:   [1992]   [1993]   [1994]   [1995]   [1996]   [1997]   [1998]   [1999]   [2000]   [2001]   [2002]   [2003]   [2004]   [2005]   [2006]   [2008]   [2009]   [2010]   [2011]   [2012]   [2013]   [2014]   [2015]   [2016]   [2017]   [2018]   [2019]
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved