Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
Full-Text Search:
Journal of Mechanical Transmission
FQ: 月刊
AD of Publication: 河南省郑州市
Lanuage: 中文;
ISSN: 1004-2539
CN: 41-1129/TH
YP: 1977
Url: 郑州机械研究所;中国机械工程学会;中国齿轮专业协会
Recommended Journals
Journal of Mechanical Transmission
2003 -01
Thermal FEM Aanlysis of Gear Tooth in Planetary Gear Train Li Shaobin, et al.
Chaos Optimization Method and Its Application to Mechanical Engineering Optimum Design Feng Chun, et al.
Trajectory tracking control of Two Cooperative Manipulators Through the Combination of Neural Network and PID Controller Jiang Chunfu, et al.
Study on Ausform Finishing Process for Surface hardened Gears Li Yanbin, et al.
Study on output behaviour for external involute gear pump Li Xiuming, et al.
Transmission Performance Design of Spiral Bevel gears and Hypoid Gears with Low-noise and Low Misalignment Error Sensibility Wang Jun, et al.
The Movable condition of Two-freedom 5-bar Mechanisms with 2-cranks Li Jia, et al.
Study on the Motive Error of Controlled Mechanism Given Track Yang Jintang, et al.
Study of the Definition of the Crank Angle Between the Two Limiting Positions of Planar Linkage Machanisms Liu Kaichang, et al.
Reliability Optimum Design of NGW Model Oil-submersible Planetary Gear Reducer Wang Shijie, et al.
Multi-objective Fuzzy Optimum Design of Tackle-block Mechanism Compensating Amplitude of Variation Based on Genetic Algorithm Xie Nenggang, et al.
Fuzzy Optimal Design of Design Parameter for the Double-circular-arcgear Run with Fuzzy Reliability Binds Peng Rushu
Design the Contour Surface of the Convex Arc Surfaced Cam Li Jiangong, et al.
A damper of pinion Zhao Juchu
The Effect of Shot Peening on the Strength of Gears in Automobile Transmission Ni Zhaorong, et al.
Determining the Reasonable Range of K in Crank-Slider Mechanism Lou Jianguo
Analysis and Measurement on Structure and Motion of FWX20 Rotary Pressure Machine for Container Head Jiang Guirong, et al.
Study on Shaving Technology of Carbonization Hardening Double-circular-arc Gear Tao Ye, et al.
Study on Hobbing Surface Hardened Gear and cutting Test with Carbide hob Zhang Jin
Front Wheel Drive Mechanism for Tricycle Vehicles with Push-pull Handles Yang Sanxu
2003 Issues:  [01] [02] [03] [04] [05] [06]
More Issues:   [1994]   [1995]   [1996]   [1997]   [1998]   [1999]   [2000]   [2001]   [2002]   [2004]   [2005]   [2006]   [2007]   [2008]   [2009]   [2010]   [2011]   [2012]   [2013]   [2014]   [2015]   [2016]   [2017]
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved