Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
Full-Text Search:
Journal of Mechanical Engineering
FQ: 半月
AD of Publication: 北京市
Lanuage: 中文;
ISSN: 0577-6686
CN: 11-2187/TH
YP: 1953
Url: 中国机械工程学会
Recommended Journals
Journal of Mechanical Engineering
2005 -04
Catalog
ELASTIC WAVE BAND GAPS IN FLEXURAL VIBRATIONS OF STRAIGHT BEAMS Wen Jihong Yu Dianlong Wang Gang Zhao Honggang Liu Yaozong (Institute of Mechatronical Engineering and Automotion, National University of Defense Technology, Changsha 410073)
STUDY ON SIMILAR DIAGNAL DYNAMIC NEURAL NETWORK HYSTERESIS MODEL FOR PIEZOCERAMIC ACTUATOR BASED ON PREISACH MODEL Dang Xuanju (Institute of Automation, Shanghai Jiaotong University, Shanghai 200030) Tan Yonghong (Laboratory of Intelligent System and Control Engineering, Guilin Institute of Electronic Technology, Guilin 541004)
STRUCTURAL OPTIMAL DESIGN OF HEAT CONDUCTIVE BODY WITH TOPOLOGY OPTIMIZATION METHOD Zuo Kongtian Chen Liping Zhang Yunqing Wang Shuting (CAD Center, Huazhong University of Science and Technology, Wuhan 430074)
INVESTIGATION OF NANOMANUFACTURING PROCESS BY MOLECULAR DYNAMICS SIMULATION BASED ON SYMPLECTIC ALGORITHM Han Xuesong Wang Shuxin Yu Siyuan (School of Mechanical Engineering, Tianjin University, Tianjin 300072)
KINEMATIC STRUCTURAL SYNTHESIS OF 3-TRANSLATIONAL WEAKLY-COUPLED PARALLEL MECHANISMS BASED ON HYBRID CHAINS Shen Huiping (Department of Mechanical Engineering, Jiangsu Polytechnic University, Changzhou 213016) Ma LU zhong (College of Mechanical Engineering, Jiangsu University, Zhengjiang 212013) Yang Tingli (Sinopec Jinling Petrochemical Corporations, Nanjing 210037)
STUDY ON FLOW FIELD IN BLADE INLET OF LARGE VERTICAL AXIAL-FLOW PUMP AND ITS INFLUENCE ON PUMP Qiu Baoyun Lin Haijiang Huang Jiyan FengXiaoli (College of Hydraulic Science and Engineering, Yangzhou University, Yangzhou 225009) Yuan Shouqi (Fluid Machinary Center, Jiangsu University, Zhenjiang 212013) Teng Haibo (Jiangdu Conservancy Bureau, Jiangdu 225200)
MICRO CONTACT PROCESS ANALYSIS IN ABRASIVE WEAR BY FINITE ELEMENT METHOD Fan Yujin Yang Xiaojing Li Zhekun Liu Jianxiong (College of Mechanical and Electronical Engineering, Kunming University of Science and Technology, Kunming 650093)
TRANSMISSION MATRIX METHOD FOR MULTI-DIMENSIONAL VIBRATION ANALYSIS OF COMPLEX MECHANICAL SYSTEMS Sun Lingling Song Kongjie (School of Mechanical Engineering, Shandong University, Jinan 250061)
RESEARCH ON PERIOD-DOUBLING BIFURCATION AND CHAOS HIBERARCHY IN GEAR SYSTEM Gao Zhiying Shen Yunwen Dong Haijun Liu Mengjun (College of Mechanical & Electrical Engineering, Northwestern Polytechnical University, Xi'an 710072)
DESIGN METHOD FOR VIBRATION UNCOUPLING OF POWERPLANTMOUNTING SYSTEM Lu Zhenhua Fan Ranglin (State Key Laboratory of Automotive Safety and Energy, Tsinghua University, Beijing 100084)
POWER OPTIMIZATION OF A REAL CLOSED INTERCOOLED REGENERATED GAS TURBINE CYCLE Wang Wenhua Chen Lingen Sun Fengrui (Naval University of Engineering, College of Naval Architecture and Power Engineering, Wuhan 430033)
DESIGN AND CALIBRATION FOR HIGH-PRESSURE ROTATIONAL RHEOMETER OF HIGH VISCOUS AND DENSE MATERIAL Yang Xiaopu Zhao Xueyi Jin Yun Cui Yujiang Wu Miao (School of Mechanical, Electronic and Information Engineering, China University of Mining and Technology, Beijing 100083)
STUDY ON THE ARRANGEMENT -ANGLE OF THE SECONDARY SOURCE ON THE PERFORMANCE OF ACTIVE NOISE CONTROL IN DUCTS Yi Shanzhen Fei Renyuan Zhou Dasen Liu Taiwen (College of Mechanical Engineering & Applied Electronics Technology, Beijing University of Technology, Beijing 100022)
STUDY OF MATHEMATICAL MODEL OF PERMANENT MAGNET BEARINGS Sun Lijun Zhang Tao Zhao Bing (School of Electrical Engineering & Automation, Tianjin University, Tianjin 300072)
ULTRA-PRECISION ALIGNMENT BASED ON DIFFERENTIAL MOIRE TECHNIQUE Wang Li Lu Bingheng Ding Yucheng Liu Hongzhong (State Key Laboratory of Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an 710049)
RESEARCH ON TECHNOLOGY OF DESIGN RETRIEVAL BASED ON FUZZY CUSTOMER REQUIREMENT Tan Jianrong Qi Feng Zhang Shuyou Dai Ruoyi (State Key Laboratory of CAD & CG, Zhejiang University, Hangzhou 310027)
MODULAR PRODUCT CONFIGURATION DESIGN FOR CUSTOMER REQUIREMENT-DRIVEN ENGINEERING Wang Haijun Sun Baoyuan (School of Mechanical Engineering, Dalian University of Technology, Dalian 116024) Zhang Jianming Wang Jijun Wei Xiaopeng (Center for Advanced Design Technology, Dalian University, Dalian 116622)
SIMULATION ON DUAL HYDRAULIC FREE PISTON ENGINE Zhou Sheng Xu Bing Yang Huayong Zhao Yang (State Key Laboratory of Fluid Power Transmission and Control, Zhejiang University, Hangzhou 310027)
RESEARCH ON BOM VIEWS AND BOM VIEW MAPPING MODEL Huang Xuewen Fan Yushun (Department of Automation, Tsinghua University, Beijing 100084)
CONNOTATION STATE OF THE ART AND RESEARCH TENDENCY OF REVERSE SUPPLY CHAIN LOGISTICS Xia Xuhui (College of Mechano-automation, Wuhan University of Science and Technology, Wuhan 430081) Liu Fei (Institute of Manufacturing Institute, Chongqing University, Chongqing 400044)
HEAT SOURCE MODEL FOR TWIN WIRE WELDING Meng Qingguo Fang Hongyuan Xu Wenli Ji Shude (State Key Laboratory of Advanced Welding Production Technology, Harbin Institute of Technology, Harbin 150001)
ANALYSIS ON MECHANICS CHARACTERISTIC FOR DEEP-DRAWING PROCESS OF PANEL PARTS Li Zan (State Key Laboratory of Die & Mould Technology, HuaZhong University of Science &Technology, Wuhan 430073) Dong Xianghuai (National Die/Mold CAD Engineering Research Center, Shanghai Jiaotong University, Shanghai 200030) Li Jianjun (State Key Laboratory of Die & Mould Technology, HuaZhong University of Science &Technology, Wuhan 430073)
MACfflNE FAULT DIAGNOSTICS BASED ON WIGNER-VILLE HIGH-ORDER SPECTRA Li Zhinong He Yongyong Chu Fulei (Department of Precision Instruments and Mechanology, Tsinghua University, Beijing 100084)
STUDY ON STATISTICALLY OPTIMAL CYLINDRICAL NEAR-FIELD ACOUSTICAL HOLOGRAPHY Li Weibing Chen Jian Yu Fei Chen Xinzhao (Dynamic Measuring Center, Hefei University of Technology, Hefei 230009)
HARDNESS AND MODULUS OF ELASTICITY OF BRUSH PLATED NICKLE COATING BY NANOINDENTATION TESTING Wang Hongmei Xu Binshi Ma Shining Dong Shiyun (National Key Laboratory for Remanufacturing, Armored Force Engineering Institute, Beijing 100072) Li Xiaoying (School of Metallurgy and Materials, University of Birmingham, Birmingham B152TT)
RESEARCH OF A 3D STATIC MICRO-MIXER WITH STAGGERED ORIENTED RIDGES Liu Sufen Fu Xin Yang Huayong (State Key Laboratory of Fluid Power Transmission and Control, Zhejiang University, Hangzhou 310027)
LOW STRESS MACROSCOPIC PLASTICBEHAVIOR OF COATED PART UNDER REPEATED IMPACT CONTACT LOAD Shi Shihong Fu Geyan (College of Mechanical Electrical Engineering, Suzhou University, Suzhou 215021) Ouyang Basheng Peng Rushu (College of Mechanical Engineering, Nanhua University, Hengyang 421001)
RESEARCH ON A WEB-BASED CAE SYSTEM FOR MASS CUSTOMIZATION PRODUCT AND IT'S APPLICATION Hou Liang Yan Huangping Chen Yongming (Department of Mechanical and Electrical Engineering, Xiamen University, Xiamen 361005)
RESEARCH ON THE SCHEDULING PROBLEMS OF THE WAREHOUSING SYSTEM BASED ON HIERARCHICAL COLORED PETRI NETS Tian Guohui Zhang Pan Tian Wei Li Xiaolei Lu Fei (School of Control Science and Engineering, Shandong University, Jinan 250061)
BIONIC DESIGN AND 3D FLOW ANALYSIS OF ARTIFICIAL BONE MICROTUBULES AND FABRICATION BASED ON CELL ATTACHMENT Xu Shanglong Li Dichen Lu Bingheng (State Key Laboratory of Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an 710049)
DYNAMIC SELF-RECONFIGURATION OF UNDERACTUATED REDUNDANT MANIPULATORS He Guangping Yang Zeyong Fan Chunhui (School of Mechanical and Electrical Engineering, North China University of Technology, Beijing 100041) Lu Zhen (School of Automation Science and Electrical Engineering, Beihang University, Beijing 100083)
ANALYSIS OF PROFILING PLUNGE SHAVING CUTTER ON SHAVING MACHINE Wang Suyu Yu Too Sun Jingyou (College of Mechanical and Electronic Engineering, Shandong University of Science & Technology, Taian 271019)
MODELING OF PRECISION GRINDING PROCESS BASED ON MICROPOSITIONING TABLE AND ERROR COMPENSATION TECHNOLOGY Tian Yanling Zhang Dawei Chen Huawei Huang Tian (School of Mechanical Engineering, Tianjin University, Tianjin 300072)
LASER TRUING AND DRESSING OF BRONZE-BONDED DIAMOND GRINDING WHEELS BY A Q-SWITCHED YAG PULSE LASER Chen Genyu Li Lijun Ma Honglu Liu Li Liu Shijiang Xie Xiaozhu (Laser Institute, Hunan University, Changsha 410082)
RESEARCH ON AUTOMATIC INSPECTION TECHNIQUES OF REAL-TIME RADIOGRAPHY FOR TURBINE -BLADE Zhou Zhenggan Zhao Sheng An Zhengang (School of Mechanical Engineering and Automation, Beihang University, Beijing 100083)
MAGNETIC FIELD CHARACTERISTIC AND MAGNETIC PRESSURE DISTRIBUTION IN TUBE ELECTROMANETIC EXPANSION Zhao Zhiheng (School of Electrical Engineering and Automation, Harbin Institute of Technology, Harbin 150001) Li Chunfeng Li Jianhui Deng Jianghua (School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001)
RESEARCH ON A UNIFIED CRITERION OF INTERNAL AND EXTERNAL WRINKLING OF STRIP METAL IN-PLANE BENDING UNDER UNEQUAL COMPRESSING Feng LU Yang He Sun Chaoyang Zhan Mei Gao Tao (College of Materials Science and Engineering, Northwestern Polytechnical University, Xi'an 710072)
ANALYSIS OF GAS JET DIFFUSED FEATURE IN GAS-ASSISTED INJECTION MOLDING Liang Jicai (College of Materials Science and Engineering, Jilin University, Changchun 130025) Wu Boda (College of Mechanical Science and Engineering, Jilin University, Changchun 130025) Li Yi Fu Peifu Chen Liheng Zhang Jingmin (College of Materials Science and Engineering, Jilin University, Changchun 130025)
MATERIAL PARRAMETER IDENTIFICATION AND OPTIMAL TECHNOLOGICAL PARAMET- ER PREDICTION FOR INTELLIGENT CONTROL OF V-SHAPE FREE BENDING PROCESS OF WIDE SHEET METAL Guan Yingping Zhao Jun Su Chunjian (College of Mechanical Engineering, Yanshan University, Qinhuangdao 066004)
CALCULATION METHOD OF THE INCREASING COEFFICIENTS FOR LOW SPECIFIC-SPEED CENTRIFUGAL PUMP Yang Junhu Zhang Renhui (School of Fluid Power and Control, Lanzhou University of Technology, Lanzhou 730050)
RESEARCH ON TURNING CHATTER PREDICTION CONTROL BASED ON ELECTRORHEOLOGICAL EFFECT Zhang Yongliang (Mechanical Engineering College, University of Shanghai Science and Technology, Shanghai 200093) Yu Junyi (Faculty of Mechanical Science and Engineering, Jilin University, Changchun 130022) Hou Dongxia (Mechanical and Production Engineering School, Nanyang Technological University, Singapore 639798) Zhang Shouqin Wu Hua (Faculty of Biology and Agricultural Engineering, Jilin University, Changchun 130022)
MIROSTRUCTURAL EVOLUTION AND WEAR MECHANISM OF WC-Co BASED ALLOY USED FOR GUIDE ROLLER IN THE PROCESS OF STEEL ROLLING Zhu Yuanzhi Lin Qiquan Yin Zhimin Huang Jiwu Zeng Yu (School of Material Science and Engineering, Central South University, Changsha 410083) Wu Youwu (School of Material Science and Engineering, Hunan University, Changsha 410082)
QUADRATIC DIAGONAL RECCRRENT NEURAL NETWORK AND APPLICATIONS IN FOLLOWING CONTROL OF WARSHIP-GUNS Zhou Lianquan Wang Xiaochun (School of Mechanical Engineering, Xi'an Jiaotong University, Xi'an 710049)
HYBRID NEURAL NETWORKS BASED PORTAL CRANES' LUFFING SYSTEM OPTIMAL DESIGN Xu Xuesong (Underwater Engineering Research Institute, Shanghai Jiaotong University, Shanghai 200030) Hu Jiquan (School of Portal Mechanical Engineering, Wuhan University of Technology, Wuhan 430063)
RESEARCH ON APPROACH TO DEVELOP MATHEMATICAL MODEL OF GENERAL EXTERNAL CHARACT ERISTIC OF FLUID COUPLING Wang Yongsheng Ding Jiangming (College of Naval Archilecture and Power Engineering, Naval University of Engineering, Wuhan 430033)
STUDY ON ELIMINATING THE SUPERFLUOUS FORCE OF MARINE ELECTROHYDRAULIC LOAD SIMULATOR APPLIED WITH DUAL-VALVE PARALLEL CONNECTED CONTROL Wang Jingfu Ye Zhengmao Li Hongren (School of Mechanical and Engineering, Harbin Institute of Technology, Harbin 150001)
STUDY AND SIMULATION OF TORCH TRACK FOR THE FLAME NC PIPE CUTTING MACHINE Xiao Juliang Yan Xiangan Wang Guodong Jia Andong (School of Mechanical Engineering, Tianjin University, Tianjin 300072)
2005 Issues:  [01] [02] [03] [04] [05] [06] [07] [08] [09] [10] [11] [12]
More Issues:   [1994]   [1995]   [1996]   [1997]   [1998]   [1999]   [2000]   [2001]   [2002]   [2003]   [2004]   [2006]   [2007]   [2008]   [2009]   [2010]   [2011]   [2012]   [2013]   [2014]   [2015]   [2016]   [2017]   [2018]   [2019]
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved