 |
Research on Deterministic Design of High-end Offshore Engineering Equipment |
|
TENG Yao,GONG Qing-tao,LAN Gong-ying,LIU Fu-xiang (Yantai CIMC Raffles Offshore Co.Ltd.,Yantai Shandong 266400,China) |
|
Study on Global Strength Calculation Method and Ultimate Strength Calculation Method of Key Structure of Semi-submersible Platforms |
|
JI Chun-yan,YU Wen,SHEN Qing-qing (Jiangsu University of Science and Technology,Zhenjiang Jiangsu 212003,China) |
|
Noise Control of Fans in Engine Room for Container Room |
|
LIN Hong-shan (Guangzhou Wenchong Shipyard Co.,LTD.,Guangzhou 510727,China) |
|
Management of Efficiency in Chinese Shipyards |
|
ZHOU Xiao-long (CSSC Guangzhou Longxue Shipbuilding Co.,Ltd.,Guangzhou 511462,China) |
|
The Study of Manufacturing Resource Database Based on Lean Shipbuilding |
|
ZHANG Hu-jun,MA Xiao-ping (School of Naval Architecture and Ocean Engineering,Jiangsu University of Science and Techaology,Zhenjiang Jiangsu 212003,China) |
|
Investigation Actuality and Development Trend of Warship Stealth Technology |
|
ZHANG Wei-jun (Mililtary Representative Breau of the PLAN in Wuhan,Wuhan 430064,China) |
|
Research on the Equivalent Thickness of Ships Protective Level |
|
HUANG Ruo-bo (Navy Representative Office Stationed at Shanghai Hudong Zhonghua(Group)Co.Ltd., Shanghai 200063,China) |
|
Dynamic Study of nMM-2 Amphibious Pontoon Bridge Spreading on Water Surface |
|
DU Nai-juan,ZHANG Jun-hai,SUN Yong (Engineering College,Xuzhou Jiangsu 221004,China) |
|
Finite Element Analysis and Improvement Project Research for the Structural Strength of a Barge's Approach Bridge |
|
ZHANG Jian~(1,2),ZHANG Bin~3,ZHANG Miao-rong~1,YIN Qun~1 (1.School of Navy Architecture and Ocean Engineering,Jiangsu University of Science and Technology, Zhenjiang Jiangsu 212003,China;2.China Ship Scientific Research Center,Wuxi Jiangsu 214082,China; 3.Yangzhou Maritime Safety Bureau,Yangzhou Jiangsu 225009,China) |
|
Analysis of Residual Ultimate Strength for Damaged Ship's Hull |
|
SHU Xin~1,WU Jian-guo~1,HONG Ying~2 (1.Zhejiang university of technology,Hangzhou 310014,China; 2.Shanghai institute of China Classification Society,Shanghai 200135,China) |
|
Shear Buckling Analysis for Simply Supported Plate Panel with Larger Opening |
|
WANG Jian-zhong~1,HONG Ying~2,CHU Yan-ling~2,Wu Jian-guo~1 (1.College of Civil Engineering and Architecture,Zhejiang University of Technology,Hangzhou 310014,China; 2.China Classification Society Shanghai Institute,Shanghai 200135,China) |
|
Research on the Orientation Assembly Technology for the General Dock of Twin Skeg Block with Subsection Shaft Bracket |
|
GAO Yun-jian,ZHANG Cui-ping,XIAO Jian,CAO Yun-yong (1.Navy Representative Office Stationed at Hudong-Zhonghua Shipbuilding(group)Co.ltd. Shanghai 200129,China;2.No.1 Ship Design Department of Hudong-Zhonghua shipbuilding(group)Co.ltd.Shanghai 200235,China) |
|
Key Technology of Alignment Installation of Major Shafting |
|
ZHANG Chao-hong~1,WANG Zhi-zhen~2 (1.Guangzhou Hang Tong Shipbuilding and Shipping Co.,LTD.,Guangzhou 510290,China; 2.National Defense Technician College of Science and Technology of Guangdong Province, Guangzhou 510515,China) |
|
The Common Problem and Solution in Design and Debugging of Ship Turbocharger Tested-bed |
|
HUANG Hong (China Shipbuilding NDRl Engineering Co.,Ltd,Shanghai 200063,China) |
